Revert "net: ethernet: bcmgenet: use phydev from struct net_device"

[cascardo/linux.git] / drivers / net / ethernet / broadcom / genet / bcmmii.c

diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c
index e907acd..457c3bc 100644 (file)
--- a/drivers/net/ethernet/broadcom/genet/bcmmii.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c
@@ -86,7 +86,7 @@ static int bcmgenet_mii_write(struct mii_bus *bus, int phy_id,
 void bcmgenet_mii_setup(struct net_device *dev)
 {
        struct bcmgenet_priv *priv = netdev_priv(dev);
-       struct phy_device *phydev = dev->phydev;
+       struct phy_device *phydev = priv->phydev;
        u32 reg, cmd_bits = 0;
        bool status_changed = false;
 
@@ -183,9 +183,9 @@ void bcmgenet_mii_reset(struct net_device *dev)
        if (GENET_IS_V4(priv))
                return;
 
-       if (dev->phydev) {
-               phy_init_hw(dev->phydev);
-               phy_start_aneg(dev->phydev);
+       if (priv->phydev) {
+               phy_init_hw(priv->phydev);
+               phy_start_aneg(priv->phydev);
        }
 }
 
@@ -236,7 +236,6 @@ static void bcmgenet_internal_phy_setup(struct net_device *dev)
 
 static void bcmgenet_moca_phy_setup(struct bcmgenet_priv *priv)
 {
-       struct net_device *ndev = priv->dev;
        u32 reg;
 
        /* Speed settings are set in bcmgenet_mii_setup() */
@@ -245,14 +244,14 @@ static void bcmgenet_moca_phy_setup(struct bcmgenet_priv *priv)
        bcmgenet_sys_writel(priv, reg, SYS_PORT_CTRL);
 
        if (priv->hw_params->flags & GENET_HAS_MOCA_LINK_DET)
-               fixed_phy_set_link_update(ndev->phydev,
+               fixed_phy_set_link_update(priv->phydev,
                                          bcmgenet_fixed_phy_link_update);
 }
 
 int bcmgenet_mii_config(struct net_device *dev)
 {
        struct bcmgenet_priv *priv = netdev_priv(dev);
-       struct phy_device *phydev = dev->phydev;
+       struct phy_device *phydev = priv->phydev;
        struct device *kdev = &priv->pdev->dev;
        const char *phy_name = NULL;
        u32 id_mode_dis = 0;
@@ -303,7 +302,7 @@ int bcmgenet_mii_config(struct net_device *dev)
                 * capabilities, use that knowledge to also configure the
                 * Reverse MII interface correctly.
                 */
-               if ((phydev->supported & PHY_BASIC_FEATURES) ==
+               if ((priv->phydev->supported & PHY_BASIC_FEATURES) ==
                                PHY_BASIC_FEATURES)
                        port_ctrl = PORT_MODE_EXT_RVMII_25;
                else
@@ -372,7 +371,7 @@ int bcmgenet_mii_probe(struct net_device *dev)
                        return -ENODEV;
                }
        } else {
-               phydev = dev->phydev;
+               phydev = priv->phydev;
                phydev->dev_flags = phy_flags;
 
                ret = phy_connect_direct(dev, phydev, bcmgenet_mii_setup,
@@ -383,6 +382,8 @@ int bcmgenet_mii_probe(struct net_device *dev)
                }
        }
 
+       priv->phydev = phydev;
+
        /* Configure port multiplexer based on what the probed PHY device since
         * reading the 'max-speed' property determines the maximum supported
         * PHY speed which is needed for bcmgenet_mii_config() to configure
@@ -390,7 +391,7 @@ int bcmgenet_mii_probe(struct net_device *dev)
         */
        ret = bcmgenet_mii_config(dev);
        if (ret) {
-               phy_disconnect(phydev);
+               phy_disconnect(priv->phydev);
                return ret;
        }
 
@@ -400,7 +401,7 @@ int bcmgenet_mii_probe(struct net_device *dev)
         * Ethernet MAC ISRs
         */
        if (priv->internal_phy)
-               phydev->irq = PHY_IGNORE_INTERRUPT;
+               priv->phydev->irq = PHY_IGNORE_INTERRUPT;
 
        return 0;
 }
@@ -605,6 +606,7 @@ static int bcmgenet_mii_pd_init(struct bcmgenet_priv *priv)
 
        }
 
+       priv->phydev = phydev;
        priv->phy_interface = pd->phy_interface;
 
        return 0;