#include <linux/mlx5/srq.h>
#include <linux/debugfs.h>
#include <linux/kmod.h>
+#include <linux/delay.h>
#include <linux/mlx5/mlx5_ifc.h>
#include "mlx5_core.h"
return err;
}
+static int mlx5_pci_enable_device(struct mlx5_core_dev *dev)
+{
+ struct pci_dev *pdev = dev->pdev;
+ int err = 0;
+
+ mutex_lock(&dev->pci_status_mutex);
+ if (dev->pci_status == MLX5_PCI_STATUS_DISABLED) {
+ err = pci_enable_device(pdev);
+ if (!err)
+ dev->pci_status = MLX5_PCI_STATUS_ENABLED;
+ }
+ mutex_unlock(&dev->pci_status_mutex);
+
+ return err;
+}
+
+static void mlx5_pci_disable_device(struct mlx5_core_dev *dev)
+{
+ struct pci_dev *pdev = dev->pdev;
+
+ mutex_lock(&dev->pci_status_mutex);
+ if (dev->pci_status == MLX5_PCI_STATUS_ENABLED) {
+ pci_disable_device(pdev);
+ dev->pci_status = MLX5_PCI_STATUS_DISABLED;
+ }
+ mutex_unlock(&dev->pci_status_mutex);
+}
+
static int request_bar(struct pci_dev *pdev)
{
int err = 0;
if (!priv->dbg_root)
return -ENOMEM;
- err = pci_enable_device(pdev);
+ err = mlx5_pci_enable_device(dev);
if (err) {
dev_err(&pdev->dev, "Cannot enable PCI device, aborting\n");
goto err_dbg;
pci_clear_master(dev->pdev);
release_bar(dev->pdev);
err_disable:
- pci_disable_device(dev->pdev);
+ mlx5_pci_disable_device(dev);
err_dbg:
debugfs_remove(priv->dbg_root);
iounmap(dev->iseg);
pci_clear_master(dev->pdev);
release_bar(dev->pdev);
- pci_disable_device(dev->pdev);
+ mlx5_pci_disable_device(dev);
debugfs_remove(priv->dbg_root);
}
struct pci_dev *pdev = dev->pdev;
int err;
+ mutex_lock(&dev->intf_state_mutex);
+ if (dev->interface_state == MLX5_INTERFACE_STATE_UP) {
+ dev_warn(&dev->pdev->dev, "%s: interface is up, NOP\n",
+ __func__);
+ goto out;
+ }
+
dev_info(&pdev->dev, "firmware version: %d.%d.%d\n", fw_rev_maj(dev),
fw_rev_min(dev), fw_rev_sub(dev));
+ /* on load removing any previous indication of internal error, device is
+ * up
+ */
+ dev->state = MLX5_DEVICE_STATE_UP;
+
err = mlx5_cmd_init(dev);
if (err) {
dev_err(&pdev->dev, "Failed initializing command interface, aborting\n");
- return err;
+ goto out_err;
}
mlx5_pagealloc_init(dev);
if (err)
pr_info("failed request module on %s\n", MLX5_IB_MOD);
+ dev->interface_state = MLX5_INTERFACE_STATE_UP;
+out:
+ mutex_unlock(&dev->intf_state_mutex);
+
return 0;
err_reg_dev:
mlx5_stop_health_poll(dev);
if (mlx5_cmd_teardown_hca(dev)) {
dev_err(&dev->pdev->dev, "tear_down_hca failed, skip cleanup\n");
- return err;
+ goto out_err;
}
err_pagealloc_stop:
mlx5_pagealloc_cleanup(dev);
mlx5_cmd_cleanup(dev);
+out_err:
+ dev->state = MLX5_DEVICE_STATE_INTERNAL_ERROR;
+ mutex_unlock(&dev->intf_state_mutex);
+
return err;
}
static int mlx5_unload_one(struct mlx5_core_dev *dev, struct mlx5_priv *priv)
{
- int err;
+ int err = 0;
+ mutex_lock(&dev->intf_state_mutex);
+ if (dev->interface_state == MLX5_INTERFACE_STATE_DOWN) {
+ dev_warn(&dev->pdev->dev, "%s: interface is down, NOP\n",
+ __func__);
+ goto out;
+ }
mlx5_unregister_device(dev);
mlx5_cleanup_mr_table(dev);
mlx5_cleanup_srq_table(dev);
mlx5_cmd_cleanup(dev);
out:
+ dev->interface_state = MLX5_INTERFACE_STATE_DOWN;
+ mutex_unlock(&dev->intf_state_mutex);
return err;
}
-static void mlx5_core_event(struct mlx5_core_dev *dev, enum mlx5_dev_event event,
+void mlx5_core_event(struct mlx5_core_dev *dev, enum mlx5_dev_event event,
unsigned long param)
{
struct mlx5_priv *priv = &dev->priv;
INIT_LIST_HEAD(&priv->ctx_list);
spin_lock_init(&priv->ctx_lock);
+ mutex_init(&dev->pci_status_mutex);
+ mutex_init(&dev->intf_state_mutex);
err = mlx5_pci_init(dev, priv);
if (err) {
dev_err(&pdev->dev, "mlx5_pci_init failed with error code %d\n", err);
kfree(dev);
}
+static pci_ers_result_t mlx5_pci_err_detected(struct pci_dev *pdev,
+ pci_channel_state_t state)
+{
+ struct mlx5_core_dev *dev = pci_get_drvdata(pdev);
+ struct mlx5_priv *priv = &dev->priv;
+
+ dev_info(&pdev->dev, "%s was called\n", __func__);
+ mlx5_enter_error_state(dev);
+ mlx5_unload_one(dev, priv);
+ mlx5_pci_disable_device(dev);
+ return state == pci_channel_io_perm_failure ?
+ PCI_ERS_RESULT_DISCONNECT : PCI_ERS_RESULT_NEED_RESET;
+}
+
+static pci_ers_result_t mlx5_pci_slot_reset(struct pci_dev *pdev)
+{
+ struct mlx5_core_dev *dev = pci_get_drvdata(pdev);
+ int err = 0;
+
+ dev_info(&pdev->dev, "%s was called\n", __func__);
+
+ err = mlx5_pci_enable_device(dev);
+ if (err) {
+ dev_err(&pdev->dev, "%s: mlx5_pci_enable_device failed with error code: %d\n"
+ , __func__, err);
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
+ pci_set_master(pdev);
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+
+ return err ? PCI_ERS_RESULT_DISCONNECT : PCI_ERS_RESULT_RECOVERED;
+}
+
+void mlx5_disable_device(struct mlx5_core_dev *dev)
+{
+ mlx5_pci_err_detected(dev->pdev, 0);
+}
+
+/* wait for the device to show vital signs. For now we check
+ * that we can read the device ID and that the health buffer
+ * shows a non zero value which is different than 0xffffffff
+ */
+static void wait_vital(struct pci_dev *pdev)
+{
+ struct mlx5_core_dev *dev = pci_get_drvdata(pdev);
+ struct mlx5_core_health *health = &dev->priv.health;
+ const int niter = 100;
+ u32 count;
+ u16 did;
+ int i;
+
+ /* Wait for firmware to be ready after reset */
+ msleep(1000);
+ for (i = 0; i < niter; i++) {
+ if (pci_read_config_word(pdev, 2, &did)) {
+ dev_warn(&pdev->dev, "failed reading config word\n");
+ break;
+ }
+ if (did == pdev->device) {
+ dev_info(&pdev->dev, "device ID correctly read after %d iterations\n", i);
+ break;
+ }
+ msleep(50);
+ }
+ if (i == niter)
+ dev_warn(&pdev->dev, "%s-%d: could not read device ID\n", __func__, __LINE__);
+
+ for (i = 0; i < niter; i++) {
+ count = ioread32be(health->health_counter);
+ if (count && count != 0xffffffff) {
+ dev_info(&pdev->dev, "Counter value 0x%x after %d iterations\n", count, i);
+ break;
+ }
+ msleep(50);
+ }
+
+ if (i == niter)
+ dev_warn(&pdev->dev, "%s-%d: could not read device ID\n", __func__, __LINE__);
+}
+
+static void mlx5_pci_resume(struct pci_dev *pdev)
+{
+ struct mlx5_core_dev *dev = pci_get_drvdata(pdev);
+ struct mlx5_priv *priv = &dev->priv;
+ int err;
+
+ dev_info(&pdev->dev, "%s was called\n", __func__);
+
+ pci_save_state(pdev);
+ wait_vital(pdev);
+
+ err = mlx5_load_one(dev, priv);
+ if (err)
+ dev_err(&pdev->dev, "%s: mlx5_load_one failed with error code: %d\n"
+ , __func__, err);
+ else
+ dev_info(&pdev->dev, "%s: device recovered\n", __func__);
+}
+
+static const struct pci_error_handlers mlx5_err_handler = {
+ .error_detected = mlx5_pci_err_detected,
+ .slot_reset = mlx5_pci_slot_reset,
+ .resume = mlx5_pci_resume
+};
+
static const struct pci_device_id mlx5_core_pci_table[] = {
{ PCI_VDEVICE(MELLANOX, 0x1011) }, /* Connect-IB */
{ PCI_VDEVICE(MELLANOX, 0x1012) }, /* Connect-IB VF */
.name = DRIVER_NAME,
.id_table = mlx5_core_pci_table,
.probe = init_one,
- .remove = remove_one
+ .remove = remove_one,
+ .err_handler = &mlx5_err_handler
};
static int __init init(void)
projects / cascardo / linux.git / blobdiff