openvswitch (1.5.90-1) unstable; urgency=low [ Open vSwitch team ] * New upstream version - Nothing yet! Try NEWS... -- Open vSwitch team Wed, 15 Feb 2012 11:12:52 +0900 openvswitch (1.5.0-1) unstable; urgency=low [ Open vSwitch team ] * New upstream version - OpenFlow: - Added support for querying, modifying, and deleting flows based on flow cookie when using NXM. - Added new NXM_PACKET_IN format. - ovs-ofctl: - Added daemonization support to the monitor and snoop commands. - ovs-vsctl: - The "find" command supports new set relational operators {=}, {!=}, {<}, {>}, {<=}, and {>=}. - ovsdb-tool now uses the typical database and schema installation directories as defaults. -- Open vSwitch team Wed, 15 Feb 2012 11:12:48 +0900 openvswitch (1.4.0-2) unstable; urgency=low * Use explicit DKMS variable for kernel source directory - 0001-debian-Fix-dependencies-for-openvswitch-datapath-dkm.patch - 0002-debian-Look-in-lib-modules-instead-of-usr-src-for-DK.patch - 0001-debian-Use-provided-kernel-source-dir.patch - 0001-debian-Do-not-run-make-if-configure-fails-during-DKM.patch - (closes: #659685) * Don't install Python modules for obsolete Python versions - 0001-debian-Don-t-install-Python-modules-for-obsolete-Pyt.patch -- Simon Horman Tue, 14 Feb 2012 11:43:13 +0900 openvswitch (1.4.0-1) unstable; urgency=low [ Open vSwitch team ] * New upstream version - Compatible with Open vSwitch kernel module included in Linux 3.3. - New "VLAN splinters" feature to work around buggy device drivers in old Linux versions. (This feature is deprecated. When broken device drivers are no longer in widespread use, we will delete this feature.) See ovs-vswitchd.conf.db(5) for more information. - OpenFlow: - Added ability to match on IPv6 flow label through NXM. - Added ability to match on ECN bits in IPv4 and IPv6 through NXM. - Added ability to match on TTL in IPv4 and IPv6 through NXM. - Added ability to modify ECN bits in IPv4. - Added ability to modify TTL in IPv4. - ovs-vswitchd: - Don't require the "normal" action to use mirrors. Traffic will now be properly mirrored for any flows, regardless of their actions. - Track packet and byte statistics sent on mirrors. - ovs-appctl: - New "fdb/flush" command to flush bridge's MAC learning table. - ovs-test: - A new distributed testing tool that allows one to diagnose performance and connectivity issues. This tool currently is not included in RH or Xen packages. - RHEL packaging now supports integration with Red Hat network scripts. - Debian: Depend on python (>= 2.7) | python-argparse instead of python-argparse to avoid pulling in python2.6 (closes: #653645) -- Open vSwitch team Mon, 30 Jan 2012 23:36:00 +0000 openvswitch (1.3.0-1) unstable; urgency=low [ Open vSwitch team ] * New upstream version - OpenFlow: - Added an OpenFlow extension which allows the "output" action to accept NXM fields. - Added an OpenFlow extension for flexible learning. - Bumped number of NXM registers from four to five. - ovs-appctl: - New "version" command to determine version of running daemon. - If no argument is provided for "cfm/show", displays detailed information about all interfaces with CFM enabled. - If no argument is provided for "lacp/show", displays detailed information about all ports with LACP enabled. - ovs-vswitchd: - The software switch now supports 255 OpenFlow tables, instead of just one. By default, only table 0 is consulted, but the new NXAST_RESUBMIT_TABLE action can look up in additional tables. Tables 128 and above are reserved for use by the switch itself; please use only tables 0 through 127. - Add support for 802.1D spanning tree (STP). - Fragment handling extensions: - New OFPC_FRAG_NX_MATCH fragment handling mode, in which L4 fields are made available for matching in fragments with offset 0. - New NXM_NX_IP_FRAG match field for matching IP fragments (usable via "ip_frag" in ovs-ofctl). - New ovs-ofctl "get-frags" and "set-frags" commands to get and set fragment handling policy. - CAPWAP tunneling now supports an extension to transport a 64-key. By default it remains compatible with the old version and other standards-based implementations. - Flow setups are now processed in a round-robin manner across ports to prevent any single client from monopolizing the CPU and conducting a denial of service attack. - Added support for native VLAN tagging. A new "vlan_mode" parameter can be set for "port". Possible values: "access", "trunk", "native-tagged" and "native-untagged". - test-openflowd has been removed. Please use ovs-vswitchd instead. -- Open vSwitch team Mon, 09 Dec 2011 23:36:00 +0000 openvswitch (1.2.0-1) unstable; urgency=low [ Open vSwitch team ] * New upstream version - New "ofproto" abstraction layer to ease porting to hardware switching ASICs. - Packaging for Red Hat Enterprise Linux 5.6 and 6.0. - Datapath support for Linux kernels up to 3.0. - OpenFlow: - New "bundle" and "bundle_load" action extensions. - Database: - Implement table unique constraints. - Support cooperative locking between callers. - ovs-dpctl: - New "-s" option for "show" command prints packet and byte counters for each port. - ovs-ofctl: - New "--readd" option for "replace-flows". - ovs-vsctl: - New "show" command to print an overview of configuration. - New "comment" command to add remark that explains intentions. - ovs-brcompatd has been rewritten to fix long-standing bugs. - ovs-openflowd has been renamed test-openflowd and moved into the tests directory. Its presence confused too many users. Please use ovs-vswitchd instead. - New ovs-benchmark utility to test flow setup performance. - A new log level "off" has been added. Configuring a log facility "off" prevents any messages from being logged to it. Previously, "emer" was effectively "off" because no messages were ever logged at level "emer". Now, errors that cause a process to exit are logged at "emer" level. - "configure" option --with-l26 has been renamed --with-linux, and --with-l26-source has been renamed --with-linux-source. The old names will be removed after the next release, so please update your scripts. - The "-2.6" suffix has been dropped from the datapath/linux-2.6 and datapath/linux-2.6/compat-2.6 directories. - Feature removals: - Dropped support for "tun_id_from_cookie" OpenFlow extension. Please use the extensible match extensions instead. - Removed the Maintenance_Point and Monitor tables in an effort to simplify 802.1ag configuration. - Performance and scalability improvements - Bug fixes -- Open vSwitch team Wed, 03 Aug 2011 14:43:00 +0000 openvswitch (1.1.1-1) unstable; urgency=low [ Open vSwitch team ] * Bug fixes. [ Simon Horman ] * docs: Suppress warning marcro DD not defined (upstream commit 58f870d0) * debian: Make openvswitch depend on Python (upstream commit aa41cb61) * debian: Don't begin openvswitch-pki description with article. (upstream commit bc6bb66) * Debian: Add ${misc:Depends} dependency to python-openvswitch * Debian: Update standards version from 3.9.1 to 3.9.2 * Debian: ${source:Version} dependency on python openvswitch * Debian: ${source:Version} dependency for python openvswitch * Switch to dpkg-source 3.0 (quilt) format - For local non-debian/ patches (above) -- Simon Horman Wed, 15 Jun 2011 10:46:15 +0900 openvswitch (1.1.0-1) unstable; urgency=low [ Open vSwitch team ] * New upstream version - Ability to define policies over IPv6 - LACP - 802.1ag CCM - Support for extensible match extensions to OpenFlow - QoS: - Support for HFSC qdisc. - Queue used by in-band control can now be configured. - Kernel: - Kernel<->userspace interface has been reworked and should be close to a stable ABI now. - "Port group" concept has been dropped. - GRE over IPSEC tunnels - Bonding: - New active backup bonding mode. - New L4 hashing support when LACP is enabled. - Source MAC hash now includes VLAN field also. - miimon support. - Greatly improved handling of large flow tables - ovs-dpctl: - "show" command now prints full vport configuration. - "dump-groups" command removed since kernel support for port groups was dropped. - ovs-vsctl: - New commands for working with the new Managers table. - "list" command enhanced with new formatting options and --columns option. - "get" command now accepts new --id option. - New "find" command. - ovs-ofctl: - New "queue-stats" command for printing queue stats. - New commands "replace-flows" and "diff-flows". - Commands to add and remove flows can now read from files. - New --flow-format option to enable or disable NXM. - New --more option to increase OpenFlow message verbosity. - Removed "tun-cookie" command, which is no longer useful. - ovs-controller enhancements for testing various features. - New ovs-vlan-test command for testing for Linux kernel driver VLAN bugs. New ovs-vlan-bug-workaround command for enabling and disabling a workaround for these driver bugs. - OpenFlow support: - "Resubmit" actions now update flow statistics. - New "register" extension for use in matching and actions, via NXM. - New "multipath" experimental action extension. - New support for matching multicast Ethernet frames, via NXM. - New extension for OpenFlow vendor error codes. - New extension to set the QoS output queue without actually sending to an output port. - Open vSwitch now reports a single flow table, instead of separate hash and wildcard tables. This better models the current implementation. - New experimental "note" action. - New "ofproto/trace" ovs-appctl command and associated utilities to ease debugging complex flow tables. - Database: - Schema documentation now includes an entity-relationship diagram. - The database is now garbage collected. In most tables, unreferenced rows will be deleted automatically. - Many tables now include statistics updated periodically by ovs-vswitchd or ovsdb-server. - Every table now has an "external-ids" column for use by OVS integrators. - There is no default controller anymore. Each bridge must have its controller individually specified. - The "fail-mode" is now a property of a Bridge instead of a Controller. - New versioning and checksum features. - New Managers table and manager_options column in Open_vSwitch table for specifying managers. The old "managers" column in the Open_vSwitch table has been removed. - Many "name" columns are now immutable. - Feature removals: - Dropped support for XenServer pre-5.6.100. - Dropped support for Linux pre-2.6.18. - Dropped controller discovery support. - Dropped "ovs-ofctl status" and the OpenFlow extension that it used. Statistics reporting in the database is a rough equivalent. - Dropped the "corekeeper" package (now separate, at http://openvswitch.org/cgi-bin/gitweb.cgi?p=corekeeper). - Performance and scalability improvements - Bug fixes [ Simon Horman ] * Add the following fixes from upstream branch-1.1 - 7f1aca9 dpif-linux: Avoid logging error on ENOENT in dpif_linux_is_internal_device(). - 8996f83 dpif-linux: Avoid segfault on netdev_get_stats() without kernel module. - 002d4a3 vswitch: Improve schema documentation. - 58bd294 cfm: Fix broken fault logic. - c042664 bridge: Run once before configuring CFM. * Switch to dpkg-source 3.0 (quilt) format -- Simon Horman Wed, 27 Apr 2011 17:11:10 +0900 openvswitch (1.1.0~pre2.g2.ea763e0e-1) unstable; urgency=low * Git snapshot, including - tests: Fix Y2011 bug in testsuite (closes: #609506) -- Simon Horman Wed, 12 Jan 2011 08:34:35 +0900 openvswitch (1.1.0~pre2.g1.bbe8d06e-1) unstable; urgency=low * Git snaptshot -- Simon Horman Thu, 06 Jan 2011 11:11:55 +0900 openvswitch (1.1.0~pre2-5) unstable; urgency=low * Open vSwitch only works on Linux so set the Architecture of binary packages to linux-any accordingly -- Simon Horman Tue, 23 Nov 2010 07:55:19 +0900 openvswitch (1.1.0~pre2-4) unstable; urgency=low * Add procps to Build-Depends (closes: #602891) -- Simon Horman Tue, 16 Nov 2010 06:46:17 +0900 openvswitch (1.1.0~pre2-3) unstable; urgency=low * Remove the corekeeper package as it isn't strongly related to Open vSwitch. It has subsequently been broken off into a separate source repository and may be uploaded as its own debian source package. http://openvswitch.org/cgi-bin/gitweb.cgi?p=corekeeper;a=summary (closes: #602946) * Avoid the use of long socket names. (closes: #602891, closes: #602911) -- Simon Horman Thu, 11 Nov 2010 06:35:05 +0900 openvswitch (1.1.0~pre2-2) unstable; urgency=low * Clarify licensing of files in xenserver/ -- Simon Horman Thu, 23 Sep 2010 10:56:18 +0900 openvswitch (1.1.0~pre2-1) unstable; urgency=low * New upstream version - Bug fixes -- Simon Horman Wed, 15 Sep 2010 18:28:59 +0900 openvswitch (1.1.0~pre1-1) unstable; urgency=low * New upstream version - OpenFlow 1.0 slicing (QoS) functionality - Python bindings for configuration database (no write support) - Performance and scalability improvements - Bug fixes -- Open vSwitch team Tue, 31 Aug 2010 23:20:00 +0000 openvswitch (1.0.1-1) unstable; urgency=low * New upstream version. -- Open vSwitch team Mon, 17 May 2010 10:36:00 +0000