Linux release whose OVS module supports the feature.
* *Linux OVS tree*: The datapath implemented by the Linux kernel module
- distributed with the OVS source tree. Some features of
- this module rely on functionality not available in older
- kernels: in this case the minumum Linux version (against
- which the feature can be compiled) is listed.
+ distributed with the OVS source tree.
* *Userspace*: Also known as DPDK, dpif-netdev or dummy datapath. It is the
- only datapath that works on NetBSD and FreeBSD.
+ only datapath that works on NetBSD, FreeBSD and Mac OSX.
* *Hyper-V*: Also known as the Windows datapath.
Feature | Linux upstream | Linux OVS tree | Userspace | Hyper-V |
----------------------|:--------------:|:--------------:|:---------:|:-------:|
-Connection tracking | 4.3 | 3.10 | NO | NO |
+NAT | 4.6 | NO | NO | NO |
+Connection tracking | 4.3 | YES | NO | PARTIAL |
Tunnel - LISP | NO | YES | NO | NO |
-Tunnel - STT | NO | 3.5 | NO | YES |
+Tunnel - STT | NO | YES | NO | YES |
Tunnel - GRE | 3.11 | YES | YES | YES |
Tunnel - VXLAN | 3.12 | YES | YES | YES |
Tunnel - Geneve | 3.18 | YES | YES | NO |
QoS - Policing | YES | YES | NO | NO |
QoS - Shaping | YES | YES | NO | NO |
sFlow | YES | YES | YES | NO |
+IPFIX | 3.10 | YES | YES | NO |
Set action | YES | YES | YES | PARTIAL |
NIC Bonding | YES | YES | YES | NO |
Multiple VTEPs | YES | YES | YES | NO |
Multiple datapaths | YES | YES | YES | NO |
Tunnel TSO - STT | N/A | YES | NO | YES |
+### Q: What DPDK version does each Open vSwitch release work with?
+
+A: The following table lists the DPDK version against which the
+ given versions of Open vSwitch will successfully build.
+
+| Open vSwitch | DPDK
+|:------------:|:-----:
+| 2.2.x | 1.6
+| 2.3.x | 1.6
+| 2.4.x | 2.0
+| 2.5.x | 2.2
+| 2.6.x | 16.04
+
### Q: I get an error like this when I configure Open vSwitch:
configure: error: Linux kernel in <dir> is version <x>, but
actions. On Linux kernels before 2.6.39, maximum-sized VLAN packets
may not be transmitted.
-### Q: What Linux kernel versions does IPFIX flow monitoring work with?
-
-A: IPFIX flow monitoring requires the Linux kernel module from Linux
- 3.10 or later, or the out-of-tree module from Open vSwitch version
- 1.10.90 or later.
-
### Q: Should userspace or kernel be upgraded first to minimize downtime?
In general, the Open vSwitch userspace should be used with the
A: Firstly, you must have a DPDK-enabled version of Open vSwitch.
- If your version is DPDK-enabled it will support the --dpdk
- argument on the command line and will display lines with
- "EAL:..." during startup when --dpdk is supplied.
+ If your version is DPDK-enabled it will support the other-config:dpdk-init
+ configuration in the database and will display lines with "EAL:..."
+ during startup when other_config:dpdk-init is set to 'true'.
Secondly, when adding a DPDK port, unlike a system port, the
type for the interface must be specified. For example;
Keep in mind that ingress and egress are from the perspective of the
switch. That means that egress shaping limits the rate at which
- traffic is allowed to transmit from a physical interface, but the
+ traffic is allowed to transmit from a physical interface, but not the
rate at which traffic will be received on a virtual machine's VIF.
For ingress policing, the behavior is the opposite.
- Use a NIC whose driver does not have VLAN problems.
- - Use "VLAN splinters", a feature in Open vSwitch 1.4 and later
+ - Use "VLAN splinters", a feature in Open vSwitch 1.4 upto 2.5
that works around bugs in kernel drivers. To enable VLAN
splinters on interface eth0, use the command:
vSwitch source tree. (OpenFlow 1.5 support in Open vSwitch is still
experimental.)
+### Q: I added a flow to accept packets on VLAN 123 and output them on
+ VLAN 456, like so:
+
+ ovs-ofctl add-flow br0 dl_vlan=123,actions=output:1,mod_vlan_vid:456
+
+ but the packets are actually being output in VLAN 123. Why?
+
+A: OpenFlow actions are executed in the order specified. Thus, the
+ actions above first output the packet, then change its VLAN. Since
+ the output occurs before changing the VLAN, the change in VLAN will
+ have no visible effect.
+
+ To solve this and similar problems, order actions so that changes
+ to headers happen before output, e.g.:
+
+ ovs-ofctl add-flow br0 dl_vlan=123,actions=mod_vlan_vid:456,output:1
+
Development
-----------
projects / cascardo / ovs.git / blobdiff