+-*- outline -*-
+
+* L3 support
+
+** New OVN logical actions
+
+*** arp
+
+Generates an ARP packet based on the current IPv4 packet and allows it
+to be processed as part of the current pipeline (and then pop back to
+processing the original IPv4 packet).
+
+TCP/IP stacks typically limit the rate at which ARPs are sent, e.g. to
+one per second for a given target. We might need to do this too.
+
+We probably need to buffer the packet that generated the ARP. I don't
+know where to do that.
+
+*** icmp4 { action... }
+
+Generates an ICMPv4 packet based on the current IPv4 packet and
+processes it according to each nested action (and then pops back to
+processing the original IPv4 packet). The intended use case is for
+generating "time exceeded" and "destination unreachable" errors.
+
+ovn-sb.xml includes a tentative specification for this action.
+
+Tentatively, the icmp4 action sets a default icmp_type and icmp_code
+and lets the nested actions override it. This means that we'd have to
+make icmp_type and icmp_code writable. Because changing icmp_type and
+icmp_code can change the interpretation of the rest of the data in the
+ICMP packet, we would want to think this through carefully. If it
+seems like a bad idea then we could instead make the type and code a
+parameter to the action: icmp4(type, code) { action... }
+
+It is worth considering what should be considered the ingress port for
+the ICMPv4 packet. It's quite likely that the ICMPv4 packet is going
+to go back out the ingress port. Maybe the icmp4 action, therefore,
+should clear the inport, so that output to the original inport won't
+be discarded.
+
+*** tcp_reset
+
+Transforms the current TCP packet into a RST reply.
+
+ovn-sb.xml includes a tentative specification for this action.
+
+*** Other actions for IPv6.
+
+IPv6 will probably need an action or actions for ND that is similar to
+the "arp" action, and an action for generating
+
+** IPv6
+
+*** ND versus ARP
+
+*** IPv6 routing
+
+*** ICMPv6
+
+** Dynamic IP to MAC bindings
+
+Some bindings from IP address to MAC will undoubtedly need to be
+discovered dynamically through ARP requests. It's straightforward
+enough for a logical L3 router to generate ARP requests and forward
+them to the appropriate switch.
+
+It's more difficult to figure out where the reply should be processed
+and stored. It might seem at first that a first-cut implementation
+could just keep track of the binding on the hypervisor that needs to
+know, but that can't happen easily because the VM that sends the reply
+might not be on the same HV as the VM that needs the answer (that is,
+the VM that sent the packet that needs the binding to be resolved) and
+there isn't an easy way for it to know which HV needs the answer.
+
+Thus, the HV that processes the ARP reply (which is unknown when the
+ARP is sent) has to tell all the HVs the binding. The most obvious
+place for this in the OVN_Southbound database.
+
+Details need to be worked out, including:
+
+*** OVN_Southbound schema changes.
+
+Possibly bindings could be added to the Port_Binding table by adding
+or modifying columns. Another possibility is that another table
+should be added.
+
+*** Logical_Flow representation
+
+It would be really nice to maintain the general-purpose nature of
+logical flows, but these bindings might have to include some
+hard-coded special cases, especially when it comes to the relationship
+with populating the bindings into the OVN_Southbound table.
+
+*** Tracking queries
+
+It's probably best to only record in the database responses to queries
+actually issued by an L3 logical router, so somehow they have to be
+tracked, probably by putting a tentative binding without a MAC address
+into the database.
+
+*** Renewal and expiration.
+
+Something needs to make sure that bindings remain valid and expire
+those that become stale.
+
+** MTU handling (fragmentation on output)
+
+** Ratelimiting.
+
+*** ARP.
+
+*** ICMP error generation, TCP reset, UDP unreachable, protocol unreachable, ...
+
+As a point of comparison, Linux doesn't ratelimit TCP resets but I
+think it does everything else.
+
* ovn-controller
** ovn-controller parameters and configuration.
(Neutron) where a port will be located, as opposed to the networking
component discovering it.
+** Gratuitous ARP generation
+
+ ovn-controller should generate a GARP when a port is bound to a chassis.
+ This is needed when ports are migrated from one chassis to another, such
+ as live migrating a VM.
+
* ovsdb-server
ovsdb-server should have adequate features for OVN but it probably
the Multicast_Group table entry in ovn-sb database into
Mcast_Macs_Remote table configuration in VTEP database.
-* Use BFD as tunnel monitor.
+* Consider the use of BFD as tunnel monitor.
+
+ The use of BFD for hypervisor-to-hypervisor tunnels is probably not worth it,
+ since there's no alternative to switch to if a tunnel goes down. It could
+ make sense at a slow rate if someone does OVN monitoring system integration,
+ but not otherwise.
+
+ When OVN gets to supporting HA for gateways (see ovn/OVN-GW-HA.md), BFD is
+ likely needed as a part of that solution.
+
+ There's more commentary in this ML post:
+ http://openvswitch.org/pipermail/dev/2015-November/062385.html
+
+* ACL
+
+** Support FTP ALGs.
+
+** Support reject action.
- Both ovn-controller and ovn-contorller-vtep should use BFD to
- monitor the tunnel liveness. Both ovs-vswitchd schema and
- VTEP schema supports BFD.
+** Support log option.
projects / cascardo / ovs.git / blobdiff