# Start a monitor running OpenFlow 1.0, then send the switch an OF1.1 features
# request
-AT_CHECK([ovs-ofctl -P openflow10 monitor br0 --detach --no-chdir --pidfile])
+AT_CHECK([ovs-ofctl -P standard monitor br0 --detach --no-chdir --pidfile])
ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
AT_CAPTURE_FILE([monitor.log])
ovs-appctl -t ovs-ofctl ofctl/send 0205000801234567
AT_SETUP([ofproto - feature request, config request])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl -vwarn show br0], [0], [stdout])
-AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+AT_CHECK([strip_xids < stdout], [0], [dnl
OFPT_FEATURES_REPLY: dpid:fedcba9876543210
n_tables:254, n_buffers:256
capabilities: FLOW_STATS TABLE_STATS PORT_STATS QUEUE_STATS ARP_MATCH_IP
-actions: OUTPUT SET_VLAN_VID SET_VLAN_PCP STRIP_VLAN SET_DL_SRC SET_DL_DST SET_NW_SRC SET_NW_DST SET_NW_TOS SET_TP_SRC SET_TP_DST ENQUEUE
+actions: output enqueue set_vlan_vid set_vlan_pcp strip_vlan mod_dl_src mod_dl_dst mod_nw_src mod_nw_dst mod_nw_tos mod_tp_src mod_tp_dst
LOCAL(br0): addr:aa:55:aa:55:00:00
config: PORT_DOWN
state: LINK_DOWN
OFPT_FEATURES_REPLY: dpid:fedcba9876543210
n_tables:254, n_buffers:256
capabilities: FLOW_STATS TABLE_STATS PORT_STATS QUEUE_STATS ARP_MATCH_IP
-actions: OUTPUT SET_VLAN_VID SET_VLAN_PCP STRIP_VLAN SET_DL_SRC SET_DL_DST SET_NW_SRC SET_NW_DST SET_NW_TOS SET_TP_SRC SET_TP_DST ENQUEUE
+actions: output enqueue set_vlan_vid set_vlan_pcp strip_vlan mod_dl_src mod_dl_dst mod_nw_src mod_nw_dst mod_nw_tos mod_tp_src mod_tp_dst
1(p1): addr:aa:55:aa:55:00:0x
config: PORT_DOWN
state: LINK_DOWN
AT_SETUP([ofproto - port stats - (OpenFlow 1.0)])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl -vwarn dump-ports br0], [0], [stdout])
-AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+AT_CHECK([strip_xids < stdout], [0], [dnl
OFPST_PORT reply: 1 ports
port LOCAL: rx pkts=0, bytes=0, drop=0, errs=0, frame=0, over=0, crc=0
tx pkts=0, bytes=0, drop=0, errs=0, coll=0
AT_SETUP([ofproto - port stats - (OpenFlow 1.2)])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl -O OpenFlow12 -vwarn dump-ports br0], [0], [stdout])
-AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+AT_CHECK([strip_xids < stdout], [0], [dnl
OFPST_PORT reply (OF1.2): 1 ports
port LOCAL: rx pkts=0, bytes=0, drop=0, errs=0, frame=0, over=0, crc=0
tx pkts=0, bytes=0, drop=0, errs=0, coll=0
OVS_VSWITCHD_STOP
AT_CLEANUP
+AT_SETUP([ofproto - port stats - (OpenFlow 1.4)])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -O OpenFlow14 -vwarn dump-ports br0], [0], [stdout])
+AT_CHECK([strip_xids < stdout | sed 's/duration=[[0-9.]]*s/duration=?s/'],
+ [0], [dnl
+OFPST_PORT reply (OF1.4): 1 ports
+ port LOCAL: rx pkts=0, bytes=0, drop=0, errs=0, frame=0, over=0, crc=0
+ tx pkts=0, bytes=0, drop=0, errs=0, coll=0
+ duration=?s
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
dnl This is really bare-bones.
dnl It at least checks request and reply serialization and deserialization.
AT_SETUP([ofproto - port-desc stats (OpenFlow 1.0)])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl -vwarn dump-ports-desc br0], [0], [stdout])
-AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+AT_CHECK([strip_xids < stdout], [0], [dnl
OFPST_PORT_DESC reply:
LOCAL(br0): addr:aa:55:aa:55:00:00
config: PORT_DOWN
AT_SETUP([ofproto - port-desc stats (OpenFlow 1.2)])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl -O OpenFlow12 -vwarn dump-ports-desc br0], [0], [stdout])
-AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+AT_CHECK([strip_xids < stdout], [0], [dnl
OFPST_PORT_DESC reply (OF1.2):
LOCAL(br0): addr:aa:55:aa:55:00:00
config: PORT_DOWN
OVS_VSWITCHD_STOP
AT_CLEANUP
-dnl This is really bare-bones.
-dnl It at least checks request and reply serialization and deserialization.
-AT_SETUP([ofproto - queue stats - (OpenFlow 1.0)])
+AT_SETUP([ofproto - port-desc stats (OpenFlow 1.5)])
OVS_VSWITCHD_START
-AT_CHECK([ovs-ofctl -vwarn queue-stats br0], [0], [stdout])
-AT_CHECK([STRIP_XIDS stdout], [0], [dnl
-OFPST_QUEUE reply: 0 queues
-])
-AT_CHECK([ovs-ofctl -vwarn queue-stats br0 ANY 5], [0],
- [OFPT_ERROR (xid=0x2): OFPQOFC_BAD_QUEUE
-OFPST_QUEUE request (xid=0x2):port=ANY queue=5
+add_of_ports br0 1 2 3
+AT_CHECK([ovs-ofctl -F OXM-OpenFlow15 -O OpenFlow15 -vwarn dump-ports-desc br0], [0], [stdout])
+AT_CHECK([strip_xids < stdout | sed 's/00:0./00:0x/'], [0], [dnl
+OFPST_PORT_DESC reply (OF1.5):
+ 1(p1): addr:aa:55:aa:55:00:0x
+ config: PORT_DOWN
+ state: LINK_DOWN
+ speed: 0 Mbps now, 0 Mbps max
+ 2(p2): addr:aa:55:aa:55:00:0x
+ config: PORT_DOWN
+ state: LINK_DOWN
+ speed: 0 Mbps now, 0 Mbps max
+ 3(p3): addr:aa:55:aa:55:00:0x
+ config: PORT_DOWN
+ state: LINK_DOWN
+ speed: 0 Mbps now, 0 Mbps max
+ LOCAL(br0): addr:aa:55:aa:55:00:0x
+ config: PORT_DOWN
+ state: LINK_DOWN
+ speed: 0 Mbps now, 0 Mbps max
])
-AT_CHECK([ovs-ofctl -vwarn queue-stats br0 10], [0],
- [OFPT_ERROR (xid=0x2): OFPQOFC_BAD_PORT
-OFPST_QUEUE request (xid=0x2):port=10 queue=ALL
+AT_CHECK([ovs-ofctl -F OXM-OpenFlow15 -O OpenFlow15 -vwarn dump-ports-desc br0 2], [0], [stdout])
+AT_CHECK([strip_xids < stdout | sed 's/00:0./00:0x/'], [0], [dnl
+OFPST_PORT_DESC reply (OF1.5):
+ 2(p2): addr:aa:55:aa:55:00:0x
+ config: PORT_DOWN
+ state: LINK_DOWN
+ speed: 0 Mbps now, 0 Mbps max
])
OVS_VSWITCHD_STOP
AT_CLEANUP
-AT_SETUP([ofproto - queue stats - (OpenFlow 1.2)])
+dnl CHECK_QUEUE_STATS(label, option, format)
+m4_define([CHECK_QUEUE_STATS], [
+AT_SETUP([ofproto - queue stats - (OpenFlow $1)])
OVS_VSWITCHD_START
-AT_CHECK([ovs-ofctl -O OpenFlow12 -vwarn queue-stats br0], [0], [stdout])
-AT_CHECK([STRIP_XIDS stdout], [0], [dnl
-OFPST_QUEUE reply (OF1.2): 0 queues
+
+AT_CHECK([ovs-ofctl -O $2 queue-stats br0 | strip_xids], [0],
+ [OFPST_QUEUE reply$3: 1 queues
+ port LOCAL queue 0: bytes=?, pkts=?, errors=?, duration=?
+])
+
+AT_CHECK([ovs-ofctl -O $2 queue-stats br0 LOCAL | strip_xids], [0],
+ [OFPST_QUEUE reply$3: 1 queues
+ port LOCAL queue 0: bytes=?, pkts=?, errors=?, duration=?
+])
+
+AT_CHECK([ovs-ofctl -O $2 queue-stats br0 LOCAL 0 | strip_xids], [0],
+ [OFPST_QUEUE reply$3: 1 queues
+ port LOCAL queue 0: bytes=?, pkts=?, errors=?, duration=?
+])
+
+AT_CHECK([ovs-ofctl -O $2 queue-stats br0 ANY 0 | strip_xids], [0],
+ [OFPST_QUEUE reply$3: 1 queues
+ port LOCAL queue 0: bytes=?, pkts=?, errors=?, duration=?
+])
+
+AT_CHECK([ovs-ofctl -O $2 queue-stats br0 LOCAL 5 | strip_xids], [0],
+ [OFPT_ERROR$3: OFPQOFC_BAD_QUEUE
+OFPST_QUEUE request$3: port=LOCAL queue=5
])
-AT_CHECK([ovs-ofctl -O OpenFlow12 -vwarn queue-stats br0 ALL 5], [0],
- [OFPT_ERROR (OF1.2) (xid=0x2): OFPQOFC_BAD_QUEUE
-OFPST_QUEUE request (OF1.2) (xid=0x2):port=ANY queue=5
+
+AT_CHECK([ovs-ofctl -O $2 queue-stats br0 ANY 5 | strip_xids], [0],
+ [OFPT_ERROR$3: OFPQOFC_BAD_QUEUE
+OFPST_QUEUE request$3: port=ANY queue=5
])
-AT_CHECK([ovs-ofctl -O OpenFlow12 -vwarn queue-stats br0 10], [0],
- [OFPT_ERROR (OF1.2) (xid=0x2): OFPQOFC_BAD_PORT
-OFPST_QUEUE request (OF1.2) (xid=0x2):port=10 queue=ALL
+
+AT_CHECK([ovs-ofctl -O $2 queue-stats br0 10 | strip_xids], [0],
+ [OFPT_ERROR$3: OFPQOFC_BAD_PORT
+OFPST_QUEUE request$3: port=10 queue=ALL
])
OVS_VSWITCHD_STOP
AT_CLEANUP
+])
+CHECK_QUEUE_STATS([1.0], [OpenFlow10], [])
+CHECK_QUEUE_STATS([1.1], [OpenFlow11], [ (OF1.1)])
+CHECK_QUEUE_STATS([1.2], [OpenFlow12], [ (OF1.2)])
+CHECK_QUEUE_STATS([1.3], [OpenFlow13], [ (OF1.3)])
+CHECK_QUEUE_STATS([1.4], [OpenFlow14], [ (OF1.4)])
dnl This is really bare-bones.
dnl It at least checks request and reply serialization and deserialization.
AT_SETUP([ofproto - queue configuration - (OpenFlow 1.0)])
OVS_VSWITCHD_START
-ADD_OF_PORTS([br0], [1], [2])
+add_of_ports br0 1 2
AT_CHECK([ovs-ofctl queue-get-config br0 1], [0], [stdout])
-AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+AT_CHECK([strip_xids < stdout], [0], [dnl
OFPT_QUEUE_GET_CONFIG_REPLY: port=1
+queue 0:
+])
+AT_CHECK([ovs-ofctl queue-get-config br0], [0], [stdout])
+AT_CHECK([strip_xids < stdout | sort], [0], [dnl
+OFPT_QUEUE_GET_CONFIG_REPLY: port=1
+OFPT_QUEUE_GET_CONFIG_REPLY: port=2
+queue 0:
+queue 0:
])
AT_CHECK([ovs-ofctl queue-get-config br0 10], [0],
[OFPT_ERROR (xid=0x2): OFPQOFC_BAD_PORT
OVS_VSWITCHD_STOP
AT_CLEANUP
+AT_SETUP([ofproto - queue configuration - (OpenFlow 1.1)])
+OVS_VSWITCHD_START
+add_of_ports br0 1 2
+AT_CHECK([ovs-ofctl -O OpenFlow11 queue-get-config br0 1], [0], [stdout])
+AT_CHECK([strip_xids < stdout], [0], [dnl
+OFPT_QUEUE_GET_CONFIG_REPLY (OF1.1): port=1
+queue 0:
+])
+AT_CHECK([ovs-ofctl -O OpenFlow11 queue-get-config br0 10 | strip_xids], [0],
+ [OFPT_ERROR (OF1.1): OFPQOFC_BAD_PORT
+OFPT_QUEUE_GET_CONFIG_REQUEST (OF1.1): port=10
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
AT_SETUP([ofproto - queue configuration - (OpenFlow 1.2)])
OVS_VSWITCHD_START
-ADD_OF_PORTS([br0], [1], [2])
+add_of_ports br0 1 2
AT_CHECK([ovs-ofctl -O OpenFlow12 queue-get-config br0 1], [0], [stdout])
-AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+AT_CHECK([strip_xids < stdout], [0], [dnl
OFPT_QUEUE_GET_CONFIG_REPLY (OF1.2): port=1
+queue 0:
])
-AT_CHECK([ovs-ofctl -O OpenFlow12 queue-get-config br0 10], [0],
- [OFPT_ERROR (OF1.2) (xid=0x2): OFPQOFC_BAD_PORT
-OFPT_QUEUE_GET_CONFIG_REQUEST (OF1.2) (xid=0x2): port=10
+AT_CHECK([ovs-ofctl -O OpenFlow12 queue-get-config br0 ANY], [0], [stdout])
+AT_CHECK([strip_xids < stdout], [0], [dnl
+OFPT_QUEUE_GET_CONFIG_REPLY (OF1.2): port=ANY
+queue 0:
+queue 0:
+queue 0:
+])
+AT_CHECK([ovs-ofctl -O OpenFlow12 queue-get-config br0 10 | strip_xids], [0],
+ [OFPT_ERROR (OF1.2): OFPQOFC_BAD_PORT
+OFPT_QUEUE_GET_CONFIG_REQUEST (OF1.2): port=10
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - queue configuration - (OpenFlow 1.4)])
+OVS_VSWITCHD_START
+add_of_ports br0 1 2
+
+AT_CHECK([ovs-ofctl -O OpenFlow14 queue-get-config br0 any | strip_xids], [0],
+ [OFPST_QUEUE_DESC reply (OF1.4): port=1
+queue 0:
+port=LOCAL
+queue 0:
+port=2
+queue 0:
+])
+
+AT_CHECK([ovs-ofctl -O OpenFlow14 queue-get-config br0 1 | strip_xids], [0],
+ [OFPST_QUEUE_DESC reply (OF1.4): port=1
+queue 0:
+])
+
+AT_CHECK([ovs-ofctl -O OpenFlow14 queue-get-config br0 10 | strip_xids], [0],
+ [OFPT_ERROR (OF1.4): OFPQOFC_BAD_PORT
+OFPST_QUEUE_DESC request (OF1.4): port=10
+])
+
+AT_CHECK([ovs-ofctl -O OpenFlow14 queue-get-config br0 1 2 | strip_xids], [0],
+ [OFPT_ERROR (OF1.4): OFPQOFC_BAD_QUEUE
+OFPST_QUEUE_DESC request (OF1.4): port=1 queue=2
])
OVS_VSWITCHD_STOP
AT_CLEANUP
dnl This is really bare-bones.
dnl It at least checks request and reply serialization and deserialization.
-AT_SETUP([ofproto - del group])
+dnl Actions definition listed in both supported formats (w/ actions=)
+AT_SETUP([ofproto - no group support (OpenFlow 1.0)])
OVS_VSWITCHD_START
AT_DATA([groups.txt], [dnl
group_id=1234,type=all,bucket=output:10
-group_id=1235,type=all,bucket=output:10
+group_id=1235,type=all,bucket=actions=output:10
+])
+AT_DATA([stderr], [dnl
+ovs-ofctl: none of the usable flow formats (OXM,OpenFlow11) is among the allowed flow formats (OpenFlow10,NXM)
+])
+AT_CHECK([ovs-ofctl -O OpenFlow10 -vwarn add-groups br0 groups.txt], [1], ,[stderr])
+AT_CHECK([ovs-ofctl -O OpenFlow10 -vwarn mod-group br0 'group_id=1234,type=all,bucket=output:10'], [1], ,[stderr])
+AT_CHECK([ovs-ofctl -O OpenFlow10 -vwarn del-groups br0], [1], ,[stderr])
+AT_CHECK([ovs-ofctl -O OpenFlow10 -vwarn dump-groups br0 ], [1], ,[stderr])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+dnl This is really bare-bones.
+dnl It at least checks request and reply serialization and deserialization.
+dnl Actions definition listed in both supported formats (w/ actions=)
+AT_SETUP([ofproto - del group (OpenFlow 1.1)])
+OVS_VSWITCHD_START
+AT_DATA([groups.txt], [dnl
+group_id=1234,type=all,bucket=output:10
+group_id=1235,type=all,bucket=actions=output:10
])
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn add-groups br0 groups.txt])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn dump-groups br0 ], [0], [stdout])
+AT_CHECK([strip_xids < stdout], [0], [dnl
+OFPST_GROUP_DESC reply (OF1.1):
+ group_id=1234,type=all,bucket=actions=output:10
+ group_id=1235,type=all,bucket=actions=output:10
+])
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn del-groups br0 group_id=1234])
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn dump-groups br0], [0], [stdout])
-AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+AT_CHECK([strip_xids < stdout], [0], [dnl
OFPST_GROUP_DESC reply (OF1.1):
group_id=1235,type=all,bucket=actions=output:10
])
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn del-groups br0 group_id=1234])
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn dump-groups br0], [0], [stdout])
-AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+AT_CHECK([strip_xids < stdout], [0], [dnl
OFPST_GROUP_DESC reply (OF1.1):
group_id=1235,type=all,bucket=actions=output:10
])
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn del-groups br0], [0])
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn dump-groups br0], [0], [stdout])
-AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+AT_CHECK([strip_xids < stdout], [0], [dnl
OFPST_GROUP_DESC reply (OF1.1):
])
+
+# Negative test.
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn del-groups br0 group_id=0xfffffff0],
+ [1], [], [ovs-ofctl: invalid group id 4294967280
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+dnl This is really bare-bones.
+dnl It at least checks request and reply serialization and deserialization.
+dnl Actions definition listed in both supported formats (w/ actions=)
+AT_SETUP([ofproto - add indirect group])
+OVS_VSWITCHD_START
+dnl indirect group must have exactly one bucket
+AT_DATA([stderr], [dnl
+OFPT_ERROR (OF1.1) (xid=0x2): OFPGMFC_INVALID_GROUP
+OFPT_GROUP_MOD (OF1.1) (xid=0x2): ***decode error: OFPGMFC_INVALID_GROUP***
+])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn add-group br0 'group_id=1234,type=indirect'], [1], , [stderr])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn add-group br0 'group_id=1235,type=indirect,bucket=output:10'])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn add-group br0 'group_id=1236,type=indirect,bucket=output:10,bucket=output:11'], [1], , [stderr])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+dnl This is really bare-bones.
+dnl It at least checks request and reply serialization and deserialization.
+dnl Actions definition listed in both supported formats (w/ actions=)
+AT_SETUP([ofproto - del group (OpenFlow 1.5)])
+OVS_VSWITCHD_START
+AT_DATA([groups.txt], [dnl
+group_id=1233,type=select,selection_method=hash,bucket=output:10,bucket=output:11
+group_id=1234,type=select,selection_method=hash,fields(eth_dst,ip_dst,tcp_dst),bucket=output:10,bucket=output:11
+group_id=1235,type=all,bucket=actions=output:12,bucket=bucket_id:0,actions=output:10,bucket=bucket_id:1,actions=output:11
+])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn add-groups br0 groups.txt])
+AT_CHECK([ovs-ofctl -F OXM-OpenFlow15 -O OpenFlow15 -vwarn dump-groups br0 1234], [0], [stdout])
+AT_CHECK([strip_xids < stdout], [0], [dnl
+OFPST_GROUP_DESC reply (OF1.5):
+ group_id=1234,type=select,selection_method=hash,fields(eth_dst,ip_dst,tcp_dst),bucket=bucket_id:0,actions=output:10,bucket=bucket_id:1,actions=output:11
+])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn del-groups br0 group_id=1234])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn dump-groups br0], [0], [stdout])
+AT_CHECK([strip_xids < stdout], [0], [dnl
+OFPST_GROUP_DESC reply (OF1.5):
+ group_id=1235,type=all,bucket=bucket_id:2,actions=output:12,bucket=bucket_id:0,actions=output:10,bucket=bucket_id:1,actions=output:11
+ group_id=1233,type=select,selection_method=hash,bucket=bucket_id:0,actions=output:10,bucket=bucket_id:1,actions=output:11
+])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn del-groups br0 group_id=1234])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn dump-groups br0], [0], [stdout])
+AT_CHECK([strip_xids < stdout], [0], [dnl
+OFPST_GROUP_DESC reply (OF1.5):
+ group_id=1235,type=all,bucket=bucket_id:2,actions=output:12,bucket=bucket_id:0,actions=output:10,bucket=bucket_id:1,actions=output:11
+ group_id=1233,type=select,selection_method=hash,bucket=bucket_id:0,actions=output:10,bucket=bucket_id:1,actions=output:11
+])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn del-groups br0], [0])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn dump-groups br0], [0], [stdout])
+AT_CHECK([strip_xids < stdout], [0], [dnl
+OFPST_GROUP_DESC reply (OF1.5):
+])
OVS_VSWITCHD_STOP
AT_CLEANUP
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn add-groups br0 groups.txt])
AT_DATA([flows.txt], [dnl
tcp actions=group:1234
-udp actions=group:1235
+table=2 udp actions=group:1235
])
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn add-flows br0 flows.txt])
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn dump-flows br0 | ofctl_strip | sort],
[0], [dnl
+ table=2, udp actions=group:1235
tcp actions=group:1234
- udp actions=group:1235
OFPST_FLOW reply (OF1.1):
])
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn del-groups br0 group_id=1234])
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn dump-flows br0 | ofctl_strip | sort],
[0], [dnl
- udp actions=group:1235
+ table=2, udp actions=group:1235
OFPST_FLOW reply (OF1.1):
])
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn del-groups br0 group_id=1234])
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn dump-flows br0 | ofctl_strip | sort],
[0], [dnl
- udp actions=group:1235
+ table=2, udp actions=group:1235
OFPST_FLOW reply (OF1.1):
])
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn del-groups br0])
OVS_VSWITCHD_STOP
AT_CLEANUP
+dnl This is really bare-bones.
+dnl It at least checks request and reply serialization and deserialization.
+dnl Actions definition listed in both supported formats (w/ actions=)
+AT_SETUP([ofproto - insert buckets])
+OVS_VSWITCHD_START
+# Add group with no buckets.
+AT_DATA([groups.txt], [dnl
+group_id=1234,type=all
+])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn add-groups br0 groups.txt])
+AT_CHECK([ovs-ofctl -F OXM-OpenFlow15 -O OpenFlow15 -vwarn dump-groups br0 1234], [0], [stdout])
+AT_CHECK([strip_xids < stdout], [0], [dnl
+OFPST_GROUP_DESC reply (OF1.5):
+ group_id=1234,type=all
+])
+
+# Add two buckets, using "last".
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn insert-buckets br0 group_id=1234,command_bucket_id=last,bucket=bucket_id:10,actions=output:10,bucket=bucket_id:11,actions=output:11])
+AT_CHECK([ovs-ofctl -F OXM-OpenFlow15 -O OpenFlow15 -vwarn dump-groups br0 1234], [0], [stdout])
+AT_CHECK([strip_xids < stdout], [0], [dnl
+OFPST_GROUP_DESC reply (OF1.5):
+ group_id=1234,type=all,bucket=bucket_id:10,actions=output:10,bucket=bucket_id:11,actions=output:11
+])
+
+# Start over again, then add two buckets using "first".
+AT_CHECK([ovs-ofctl -O OpenFlow15 --strict del-groups br0 group_id=1234])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn add-group br0 group_id=1234,type=all])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn insert-buckets br0 group_id=1234,command_bucket_id=first,bucket=bucket_id:10,actions=output:10,bucket=bucket_id:11,actions=output:11])
+AT_CHECK([ovs-ofctl -F OXM-OpenFlow15 -O OpenFlow15 -vwarn dump-groups br0 1234], [0], [stdout])
+AT_CHECK([strip_xids < stdout], [0], [dnl
+OFPST_GROUP_DESC reply (OF1.5):
+ group_id=1234,type=all,bucket=bucket_id:10,actions=output:10,bucket=bucket_id:11,actions=output:11
+])
+
+# Add two more buckets before the existing ones.
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn insert-buckets br0 group_id=1234,command_bucket_id=first,bucket=bucket_id:0,actions=output:0,bucket=bucket_id:1,actions=output:1])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn dump-groups br0], [0], [stdout])
+AT_CHECK([strip_xids < stdout], [0], [dnl
+OFPST_GROUP_DESC reply (OF1.5):
+ group_id=1234,type=all,bucket=bucket_id:0,actions=output:0,bucket=bucket_id:1,actions=output:1,bucket=bucket_id:10,actions=output:10,bucket=bucket_id:11,actions=output:11
+])
+
+# Add another bucket at the end.
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn insert-buckets br0 group_id=1234,command_bucket_id=last,bucket=bucket_id:14,actions=output:14,bucket=bucket_id:15,actions=output:15])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn dump-groups br0], [0], [stdout])
+AT_CHECK([strip_xids < stdout], [0], [dnl
+OFPST_GROUP_DESC reply (OF1.5):
+ group_id=1234,type=all,bucket=bucket_id:0,actions=output:0,bucket=bucket_id:1,actions=output:1,bucket=bucket_id:10,actions=output:10,bucket=bucket_id:11,actions=output:11,bucket=bucket_id:14,actions=output:14,bucket=bucket_id:15,actions=output:15
+])
+
+# Verify that duplicate bucket IDs are rejected.
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn insert-buckets br0 group_id=1234,command_bucket_id=last,bucket=bucket_id:14,actions=output:14,bucket=bucket_id:15,actions=output:15], [1], [], [stderr])
+AT_CHECK([strip_xids < stderr | sed '/truncated/,$d'], [0], [dnl
+OFPT_ERROR (OF1.5): OFPGMFC_BUCKET_EXISTS
+OFPT_GROUP_MOD (OF1.5):
+])
+
+
+# Add another bucket just before bucket 15.
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn insert-buckets br0 group_id=1234,command_bucket_id=15])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn dump-groups br0], [0], [stdout])
+AT_CHECK([strip_xids < stdout], [0], [dnl
+OFPST_GROUP_DESC reply (OF1.5):
+ group_id=1234,type=all,bucket=bucket_id:0,actions=output:0,bucket=bucket_id:1,actions=output:1,bucket=bucket_id:10,actions=output:10,bucket=bucket_id:11,actions=output:11,bucket=bucket_id:14,actions=output:14,bucket=bucket_id:15,actions=output:15
+])
+
+# Add two more buckets just before bucket 11,
+# getting the command from a file.
+AT_DATA([buckets.txt], [dnl
+group_id=1234,command_bucket_id=11,bucket=bucket_id:12,actions=output:12,bucket=bucket_id:13,actions=output:13
+])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn insert-buckets br0 - < buckets.txt])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn dump-groups br0], [0], [stdout])
+AT_CHECK([strip_xids < stdout], [0], [dnl
+OFPST_GROUP_DESC reply (OF1.5):
+ group_id=1234,type=all,bucket=bucket_id:0,actions=output:0,bucket=bucket_id:1,actions=output:1,bucket=bucket_id:10,actions=output:10,bucket=bucket_id:11,actions=output:11,bucket=bucket_id:12,actions=output:12,bucket=bucket_id:13,actions=output:13,bucket=bucket_id:14,actions=output:14,bucket=bucket_id:15,actions=output:15
+])
+
+# Add yet two more buckets.
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn insert-buckets br0 group_id=1234,command_bucket_id=15,bucket=bucket_id:20,actions=output:20,bucket=bucket_id:21,actions=output:21])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn dump-groups br0], [0], [stdout])
+AT_CHECK([strip_xids < stdout], [0], [dnl
+OFPST_GROUP_DESC reply (OF1.5):
+ group_id=1234,type=all,bucket=bucket_id:0,actions=output:0,bucket=bucket_id:1,actions=output:1,bucket=bucket_id:10,actions=output:10,bucket=bucket_id:11,actions=output:11,bucket=bucket_id:12,actions=output:12,bucket=bucket_id:13,actions=output:13,bucket=bucket_id:14,actions=output:14,bucket=bucket_id:15,actions=output:15,bucket=bucket_id:20,actions=output:20,bucket=bucket_id:21,actions=output:21
+])
+
+# Negative tests.
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn insert-buckets br0 group_id=1234,command_bucket_id=0xffffff01,bucket=bucket_id:0,actions=output:0,bucket=bucket_id:1,actions=output:1], [1], [],
+ [ovs-ofctl: invalid command bucket id 4294967041
+])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn insert-buckets br0 group_id=1234,command_bucket_id=first,bucket=bucket_id:0,actions=output:0,bucket=bucket_id:1,actions=output:1], [1], [],
+ [ovs-ofctl: insert-bucket needs OpenFlow 1.5 or later ('-O OpenFlow15')
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+dnl This is really bare-bones.
+dnl It at least checks request and reply serialization and deserialization.
+dnl Actions definition listed in both supported formats (w/ actions=)
+AT_SETUP([ofproto - remove buckets])
+OVS_VSWITCHD_START
+AT_DATA([groups.txt], [dnl
+group_id=1234,type=all,bucket=bucket_id:10,actions=output:10,bucket=bucket_id:11,actions=output:11,bucket=bucket_id:12,actions=output:12,bucket=bucket_id:13,actions=output:13,bucket=bucket_id:14,actions=output:14,bucket=bucket_id:15,actions=output:15,bucket=bucket_id:16,actions=output:16
+])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn add-groups br0 groups.txt])
+AT_CHECK([ovs-ofctl -F OXM-OpenFlow15 -O OpenFlow15 -vwarn dump-groups br0 1234], [0], [stdout])
+AT_CHECK([strip_xids < stdout], [0], [dnl
+OFPST_GROUP_DESC reply (OF1.5):
+ group_id=1234,type=all,bucket=bucket_id:10,actions=output:10,bucket=bucket_id:11,actions=output:11,bucket=bucket_id:12,actions=output:12,bucket=bucket_id:13,actions=output:13,bucket=bucket_id:14,actions=output:14,bucket=bucket_id:15,actions=output:15,bucket=bucket_id:16,actions=output:16
+])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn remove-buckets br0 group_id=1234,command_bucket_id=first])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn dump-groups br0], [0], [stdout])
+AT_CHECK([strip_xids < stdout], [0], [dnl
+OFPST_GROUP_DESC reply (OF1.5):
+ group_id=1234,type=all,bucket=bucket_id:11,actions=output:11,bucket=bucket_id:12,actions=output:12,bucket=bucket_id:13,actions=output:13,bucket=bucket_id:14,actions=output:14,bucket=bucket_id:15,actions=output:15,bucket=bucket_id:16,actions=output:16
+])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn remove-buckets br0 group_id=1234,command_bucket_id=last])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn dump-groups br0], [0], [stdout])
+AT_CHECK([strip_xids < stdout], [0], [dnl
+OFPST_GROUP_DESC reply (OF1.5):
+ group_id=1234,type=all,bucket=bucket_id:11,actions=output:11,bucket=bucket_id:12,actions=output:12,bucket=bucket_id:13,actions=output:13,bucket=bucket_id:14,actions=output:14,bucket=bucket_id:15,actions=output:15
+])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn remove-buckets br0 group_id=1234,command_bucket_id=13])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn dump-groups br0], [0], [stdout])
+AT_CHECK([strip_xids < stdout], [0], [dnl
+OFPST_GROUP_DESC reply (OF1.5):
+ group_id=1234,type=all,bucket=bucket_id:11,actions=output:11,bucket=bucket_id:12,actions=output:12,bucket=bucket_id:14,actions=output:14,bucket=bucket_id:15,actions=output:15
+])
+AT_DATA([buckets.txt], [dnl
+group_id=1234
+])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn remove-buckets br0 - < buckets.txt])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn dump-groups br0], [0], [stdout])
+AT_CHECK([strip_xids < stdout], [0], [dnl
+OFPST_GROUP_DESC reply (OF1.5):
+ group_id=1234,type=all
+])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn remove-buckets br0 group_id=1234,command_bucket_id=first])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn remove-buckets br0 group_id=1234,command_bucket_id=last])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn remove-buckets br0 group_id=1234,command_bucket_id=all])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn remove-buckets br0 group_id=1234,command_bucket_id=1], [1], [], [stderr])
+AT_CHECK([ofctl_strip < stderr], [0], [dnl
+OFPT_ERROR (OF1.5): OFPGMFC_UNKNOWN_BUCKET
+OFPT_GROUP_MOD (OF1.5):
+ REMOVE_BUCKET command_bucket_id:1,group_id=1234
+])
+# Negative test.
+AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn remove-buckets br0 group_id=1234,command_bucket_id=last], [1], [],
+ [ovs-ofctl: remove-bucket needs OpenFlow 1.5 or later ('-O OpenFlow15')
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
dnl This is really bare-bones.
dnl It at least checks request and reply serialization and deserialization.
AT_SETUP([ofproto - flow mod checks group availability])
#
# This 'sed' command captures the error message but drops details.
AT_CHECK([sed '/truncated/d
-/^000000.0/d' stderr | STRIP_XIDS], [0],
+/^000000.0/d' stderr | strip_xids], [0],
[OFPT_ERROR (OF1.1): OFPBAC_BAD_OUT_GROUP
OFPT_FLOW_MOD (OF1.1):
])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn add-group br0 group_id=1234,type=all,bucket=output:10], [0], [stdout])
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn dump-groups br0], [0], [stdout])
-AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+AT_CHECK([strip_xids < stdout], [0], [dnl
OFPST_GROUP_DESC reply (OF1.1):
group_id=1234,type=all,bucket=actions=output:10
])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn add-group br0 group_id=1234,type=all,bucket=output:10])
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn dump-groups br0], [0], [stdout])
-AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+AT_CHECK([strip_xids < stdout], [0], [dnl
OFPST_GROUP_DESC reply (OF1.1):
group_id=1234,type=all,bucket=actions=output:10
])
AT_SETUP([ofproto - group features])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl -O OpenFlow12 -vwarn dump-group-features br0], [0], [stdout])
-AT_CHECK([STRIP_XIDS stdout], [0], [dnl
+AT_CHECK([strip_xids < stdout], [0], [dnl
OFPST_GROUP_FEATURES reply (OF1.2):
Group table:
- Types: 0x0
+ Types: 0xf
Capabilities: 0x7
+ all group:
+ max_groups=0xffffff00
+ actions: output group set_field strip_vlan push_vlan mod_nw_ttl dec_ttl set_mpls_ttl dec_mpls_ttl push_mpls pop_mpls set_queue
+ select group:
+ max_groups=0xffffff00
+ actions: output group set_field strip_vlan push_vlan mod_nw_ttl dec_ttl set_mpls_ttl dec_mpls_ttl push_mpls pop_mpls set_queue
+ indirect group:
+ max_groups=0xffffff00
+ actions: output group set_field strip_vlan push_vlan mod_nw_ttl dec_ttl set_mpls_ttl dec_mpls_ttl push_mpls pop_mpls set_queue
+ fast failover group:
+ max_groups=0xffffff00
+ actions: output group set_field strip_vlan push_vlan mod_nw_ttl dec_ttl set_mpls_ttl dec_mpls_ttl push_mpls pop_mpls set_queue
])
OVS_VSWITCHD_STOP
AT_CLEANUP
dnl This is really bare-bones.
dnl It at least checks request and reply serialization and deserialization.
-AT_SETUP([ofproto - group stats])
+AT_SETUP([ofproto - group stats (OpenFlow 1.1)])
OVS_VSWITCHD_START
AT_DATA([groups.txt], [dnl
group_id=1234,type=all,bucket=output:10
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn add-groups br0 groups.txt])
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn add-flow br0 'tcp actions=group:1234'])
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn dump-group-stats br0 group_id=1234], [0], [stdout])
-AT_CHECK([STRIP_XIDS stdout | sort], [0], [dnl
+AT_CHECK([strip_xids < stdout | sort], [0], [dnl
group_id=1234,ref_count=1,packet_count=0,byte_count=0,bucket0:packet_count=0,byte_count=0
OFPST_GROUP reply (OF1.1):
])
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn dump-group-stats br0], [0], [stdout])
-AT_CHECK([STRIP_XIDS stdout | sort], [0], [dnl
+AT_CHECK([strip_xids < stdout | sort], [0], [dnl
group_id=1234,ref_count=1,packet_count=0,byte_count=0,bucket0:packet_count=0,byte_count=0
group_id=1235,ref_count=0,packet_count=0,byte_count=0,bucket0:packet_count=0,byte_count=0
OFPST_GROUP reply (OF1.1):
OVS_VSWITCHD_STOP
AT_CLEANUP
+dnl This is really bare-bones.
+dnl It at least checks request and reply serialization and deserialization.
+AT_SETUP([ofproto - group stats (OpenFlow 1.3)])
+OVS_VSWITCHD_START
+AT_DATA([groups.txt], [dnl
+group_id=1234,type=all,bucket=output:10
+group_id=1235,type=all,bucket=output:10
+])
+AT_CHECK([ovs-ofctl -O OpenFlow13 -vwarn add-groups br0 groups.txt])
+AT_CHECK([ovs-ofctl -O OpenFlow13 -vwarn add-flow br0 'tcp actions=group:1234'])
+AT_CHECK([ovs-ofctl -O OpenFlow13 -vwarn dump-group-stats br0 group_id=1234], [0], [stdout])
+AT_CHECK([strip_xids < stdout | sed 's/duration=[[0-9.]]*s/duration=?s/' | sort], [0], [dnl
+ group_id=1234,duration=?s,ref_count=1,packet_count=0,byte_count=0,bucket0:packet_count=0,byte_count=0
+OFPST_GROUP reply (OF1.3):
+])
+AT_CHECK([ovs-ofctl -O OpenFlow13 -vwarn dump-group-stats br0], [0], [stdout])
+AT_CHECK([strip_xids < stdout | sed 's/duration=[[0-9.]]*s/duration=?s/' | sort], [0], [dnl
+ group_id=1234,duration=?s,ref_count=1,packet_count=0,byte_count=0,bucket0:packet_count=0,byte_count=0
+ group_id=1235,duration=?s,ref_count=0,packet_count=0,byte_count=0,bucket0:packet_count=0,byte_count=0
+OFPST_GROUP reply (OF1.3):
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+dnl This is really bare-bones.
+dnl It at least checks request and reply serialization and deserialization.
+AT_SETUP([ofproto - group stats (OpenFlow 1.5)])
+OVS_VSWITCHD_START
+AT_DATA([groups.txt], [dnl
+group_id=1234,type=all,bucket=output:10
+group_id=1235,type=all,bucket=output:10
+])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn add-groups br0 groups.txt])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn add-flow br0 'tcp actions=group:1234'])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn dump-group-stats br0 group_id=1234], [0], [stdout])
+AT_CHECK([strip_xids < stdout | sed 's/duration=[[0-9.]]*s/duration=?s/' | sort], [0], [dnl
+ group_id=1234,duration=?s,ref_count=1,packet_count=0,byte_count=0,bucket0:packet_count=0,byte_count=0
+OFPST_GROUP reply (OF1.5):
+])
+AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn dump-group-stats br0], [0], [stdout])
+AT_CHECK([strip_xids < stdout | sed 's/duration=[[0-9.]]*s/duration=?s/' | sort], [0], [dnl
+ group_id=1234,duration=?s,ref_count=1,packet_count=0,byte_count=0,bucket0:packet_count=0,byte_count=0
+ group_id=1235,duration=?s,ref_count=0,packet_count=0,byte_count=0,bucket0:packet_count=0,byte_count=0
+OFPST_GROUP reply (OF1.5):
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+dnl This found a use-after-free error in bridge destruction in the
+dnl presence of groups.
+AT_SETUP([ofproto - group add then bridge delete (OpenFlow 1.3)])
+OVS_VSWITCHD_START
+AT_DATA([groups.txt], [dnl
+group_id=1234,type=all,bucket=output:10
+group_id=1235,type=all,bucket=output:10
+])
+AT_CHECK([ovs-ofctl -O OpenFlow13 -vwarn add-groups br0 groups.txt])
+AT_CHECK([ovs-vsctl del-br br0])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
AT_SETUP([ofproto - mod-port (OpenFlow 1.0)])
OVS_VSWITCHD_START
for command_config_state in \
command=$[1] config=`echo $[2] | sed 's/,/ /g'` state=$[3]
AT_CHECK([ovs-ofctl -vwarn mod-port br0 br0 $command])
AT_CHECK([ovs-ofctl -vwarn show br0], [0], [stdout])
- AT_CHECK_UNQUOTED([STRIP_XIDS stdout], [0], [dnl
+ AT_CHECK_UNQUOTED([strip_xids < stdout], [0], [dnl
OFPT_FEATURES_REPLY: dpid:fedcba9876543210
n_tables:254, n_buffers:256
capabilities: FLOW_STATS TABLE_STATS PORT_STATS QUEUE_STATS ARP_MATCH_IP
-actions: OUTPUT SET_VLAN_VID SET_VLAN_PCP STRIP_VLAN SET_DL_SRC SET_DL_DST SET_NW_SRC SET_NW_DST SET_NW_TOS SET_TP_SRC SET_TP_DST ENQUEUE
+actions: output enqueue set_vlan_vid set_vlan_pcp strip_vlan mod_dl_src mod_dl_dst mod_nw_src mod_nw_dst mod_nw_tos mod_tp_src mod_tp_dst
LOCAL(br0): addr:aa:55:aa:55:00:00
config: $config
state: $state
command=$[1] config=`echo $[2] | sed 's/,/ /g'` state=$[3]
AT_CHECK([ovs-ofctl -O OpenFlow12 -vwarn mod-port br0 br0 $command])
AT_CHECK([ovs-ofctl -O OpenFlow12 -vwarn show br0], [0], [stdout])
- AT_CHECK_UNQUOTED([STRIP_XIDS stdout], [0], [dnl
+ AT_CHECK_UNQUOTED([strip_xids < stdout], [0], [dnl
OFPT_FEATURES_REPLY (OF1.2): dpid:fedcba9876543210
n_tables:254, n_buffers:256
-capabilities: FLOW_STATS TABLE_STATS PORT_STATS QUEUE_STATS
+capabilities: FLOW_STATS TABLE_STATS PORT_STATS GROUP_STATS QUEUE_STATS
LOCAL(br0): addr:aa:55:aa:55:00:00
config: $config
state: $state
OVS_VSWITCHD_STOP
AT_CLEANUP
+AT_SETUP([ofproto - mod-port (OpenFlow 1.4)])
+OVS_VSWITCHD_START
+for command_config_state in \
+ 'up 0 0' \
+ 'down PORT_DOWN LINK_DOWN' \
+ 'no-receive PORT_DOWN,NO_RECV LINK_DOWN' \
+ 'no-forward PORT_DOWN,NO_RECV,NO_FWD LINK_DOWN' \
+ 'no-packet-in PORT_DOWN,NO_RECV,NO_FWD,NO_PACKET_IN LINK_DOWN' \
+ 'forward PORT_DOWN,NO_RECV,NO_PACKET_IN LINK_DOWN' \
+ 'packet-in PORT_DOWN,NO_RECV LINK_DOWN' \
+ 'up NO_RECV 0' \
+ 'receive 0 0'
+do
+ set $command_config_state
+ command=$[1] config=`echo $[2] | sed 's/,/ /g'` state=$[3]
+ AT_CHECK([ovs-ofctl -O OpenFlow14 -vwarn mod-port br0 br0 $command])
+ AT_CHECK([ovs-ofctl -O OpenFlow14 -vwarn show br0], [0], [stdout])
+ AT_CHECK_UNQUOTED([strip_xids < stdout], [0], [dnl
+OFPT_FEATURES_REPLY (OF1.4): dpid:fedcba9876543210
+n_tables:254, n_buffers:256
+capabilities: FLOW_STATS TABLE_STATS PORT_STATS GROUP_STATS QUEUE_STATS
+OFPST_PORT_DESC reply (OF1.4):
+ LOCAL(br0): addr:aa:55:aa:55:00:00
+ config: $config
+ state: $state
+ speed: 0 Mbps now, 0 Mbps max
+OFPT_GET_CONFIG_REPLY (OF1.4): frags=normal miss_send_len=0
+])
+done
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
AT_SETUP([ofproto - basic flow_mod commands (NXM)])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip], [0], [NXST_FLOW reply:
table=1, in_port=4 actions=output:3
NXST_FLOW reply:
])
-AT_CHECK([ovs-ofctl dump-aggregate br0 table=0 | STRIP_XIDS], [0], [dnl
+AT_CHECK([ovs-ofctl dump-aggregate br0 table=0 | strip_xids], [0], [dnl
NXST_AGGREGATE reply: packet_count=0 byte_count=0 flow_count=2
])
AT_CHECK([ovs-ofctl del-flows br0])
table=1, in_port=4 actions=output:3
OFPST_FLOW reply:
])
-AT_CHECK([ovs-ofctl -F openflow10 dump-aggregate br0 table=0 | STRIP_XIDS], [0], [dnl
+AT_CHECK([ovs-ofctl -F openflow10 dump-aggregate br0 table=0 | strip_xids], [0], [dnl
OFPST_AGGREGATE reply: packet_count=0 byte_count=0 flow_count=2
])
AT_CHECK([ovs-ofctl -F openflow10 del-flows br0])
OVS_VSWITCHD_STOP
AT_CLEANUP
+# It's really dumb that check_overlap and reset_counts are considered
+# part of flow state, but OpenFlow implies that it is, and OFTest and
+# some users insist on it.
+AT_SETUP([ofproto - add-flow and flags])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -F openflow10 add-flow br0 check_overlap,in_port=1,actions=drop])
+# Prior to OF1.3, flow dumps didn't include a "flags" field.
+AT_CHECK([ovs-ofctl -F openflow10 dump-flows br0 | ofctl_strip], [0], [dnl
+OFPST_FLOW reply:
+ in_port=1 actions=drop
+])
+AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip], [0], [dnl
+OFPST_FLOW reply (OF1.1):
+ in_port=1 actions=drop
+])
+AT_CHECK([ovs-ofctl -O OpenFlow12 dump-flows br0 | ofctl_strip], [0], [dnl
+OFPST_FLOW reply (OF1.2):
+ in_port=1 actions=drop
+])
+# OF1.3 makes the flags visible.
+AT_CHECK([ovs-ofctl -O OpenFlow13 dump-flows br0 | ofctl_strip], [0], [dnl
+OFPST_FLOW reply (OF1.3):
+ check_overlap reset_counts in_port=1 actions=drop
+])
+AT_CHECK([ovs-ofctl -O OpenFlow14 dump-flows br0 | ofctl_strip], [0], [dnl
+OFPST_FLOW reply (OF1.4):
+ check_overlap reset_counts in_port=1 actions=drop
+])
+AT_CHECK([ovs-ofctl -O OpenFlow15 dump-flows br0 | ofctl_strip], [0], [dnl
+OFPST_FLOW reply (OF1.5):
+ check_overlap reset_counts in_port=1 actions=drop
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
AT_SETUP([ofproto - basic flow_mod commands (OpenFlow 1.1)])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip], [0], [OFPST_FLOW reply (OF1.1):
table=1, in_port=4 actions=output:3
OFPST_FLOW reply (OF1.1):
])
-AT_CHECK([ovs-ofctl -O OpenFlow11 dump-aggregate br0 table=0 | STRIP_XIDS], [0], [dnl
+AT_CHECK([ovs-ofctl -O OpenFlow11 dump-aggregate br0 table=0 | strip_xids], [0], [dnl
OFPST_AGGREGATE reply (OF1.1): packet_count=0 byte_count=0 flow_count=2
])
AT_CHECK([ovs-ofctl -O OpenFlow11 del-flows br0])
# but at least it's the same code in ofpacts_check() that issues the error.
AT_CHECK([ovs-ofctl add-flow -O OpenFlow11 br0 table=1,action=goto_table:1],
[1], [],
- [ovs-ofctl: actions are invalid with specified match (OFPBRC_BAD_TABLE_ID)
+ [ovs-ofctl: actions are invalid with specified match (OFPBIC_BAD_TABLE_ID)
])
OVS_VSWITCHD_STOP
AT_CLEANUP
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl add-flow br0 ipv6,table=1,in_port=3,actions=drop])
AT_CHECK([ovs-ofctl add-flow br0 ipv6,table=1,in_port=3,actions=set_field:fe80:0123:4567:890a:a6ba:dbff:fefe:59fa-\>ipv6_src])
+AT_CHECK([ovs-ofctl add-flow br0 icmp6,icmp_type=136,table=1,in_port=3,actions=set_field:fe80:8675:3097:890a:a6ba:dbff:f00d:59fa-\>nd_target,set_field:cc:dd:ee:ff:00:11-\>nd_tll])
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ table=1, icmp6,in_port=3,icmp_type=136 actions=load:0xa6badbfff00d59fa->NXM_NX_ND_TARGET[[0..63]],load:0xfe8086753097890a->NXM_NX_ND_TARGET[[64..127]],load:0xccddeeff0011->NXM_NX_ND_TLL[[]]
table=1, ipv6,in_port=3 actions=load:0xa6badbfffefe59fa->NXM_NX_IPV6_SRC[[0..63]],load:0xfe8001234567890a->NXM_NX_IPV6_SRC[[64..127]]
NXST_FLOW reply:
])
OVS_VSWITCHD_STOP
AT_CLEANUP
+AT_SETUP([ofproto - set-field flow_mod commands (OF1.2)])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 ipv6,table=1,in_port=3,actions=drop])
+AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 ipv6,table=1,in_port=3,actions=set_field:fe80:0123:4567:890a:a6ba:dbff:fefe:59fa-\>ipv6_src])
+AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 icmp6,icmp_type=136,table=1,in_port=3,actions=set_field:fe80:8675:3097:890a:a6ba:dbff:f00d:59fa-\>nd_target,set_field:cc:dd:ee:ff:00:11-\>nd_tll])
+AT_CHECK([ovs-ofctl -O OpenFlow12 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ table=1, icmp6,in_port=3,icmp_type=136 actions=set_field:fe80:8675:3097:890a:a6ba:dbff:f00d:59fa->nd_target,set_field:cc:dd:ee:ff:00:11->nd_tll
+ table=1, ipv6,in_port=3 actions=set_field:fe80:123:4567:890a:a6ba:dbff:fefe:59fa->ipv6_src
+OFPST_FLOW reply (OF1.2):
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
AT_SETUP([ofproto - dump flows with cookie])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl add-flow br0 cookie=0x1,in_port=1,actions=1])
cookie=0x3, in_port=3 actions=output:1
NXST_FLOW reply:
])
-AT_CHECK([ovs-ofctl dump-aggregate br0 table=0 | STRIP_XIDS], [0], [dnl
+AT_CHECK([ovs-ofctl dump-aggregate br0 table=0 | strip_xids], [0], [dnl
NXST_AGGREGATE reply: packet_count=0 byte_count=0 flow_count=3
])
AT_CHECK([ovs-ofctl dump-flows br0 cookie=0x3/-1 | ofctl_strip | sort], [0], [dnl
cookie=0x3, in_port=3 actions=output:1
NXST_FLOW reply:
])
-AT_CHECK([ovs-ofctl dump-aggregate br0 cookie=0x3/-1 | STRIP_XIDS], [0], [dnl
+AT_CHECK([ovs-ofctl dump-aggregate br0 cookie=0x3/-1 | strip_xids], [0], [dnl
NXST_AGGREGATE reply: packet_count=0 byte_count=0 flow_count=1
])
OVS_VSWITCHD_STOP
OVS_VSWITCHD_STOP
AT_CLEANUP
+AT_SETUP([ofproto - flow_mod with out_port matching (OpenFlow 1.0)])
+OVS_VSWITCHD_START
+AT_DATA([flows.txt], [dnl
+ in_port=1 actions=output:2
+ in_port=2 actions=output:1,output:2,output:3
+ in_port=3 actions=output:3,output:1,output:2
+ in_port=4 actions=drop
+ in_port=5 actions=output:3
+ in_port=6 actions=output:1
+])
+AT_CHECK([ovs-ofctl -F openflow10 add-flows br0 flows.txt])
+(cat flows.txt; echo 'OFPST_FLOW reply:') > expout
+AT_CHECK([ovs-ofctl -F openflow10 dump-flows br0 | ofctl_strip | sort], [0],
+ [expout])
+
+(grep 'output:2' flows.txt; echo 'OFPST_FLOW reply:') > expout
+AT_CHECK([ovs-ofctl -F openflow10 dump-flows br0 out_port=2 | ofctl_strip | sort], [0], [expout])
+
+AT_CHECK([ovs-ofctl -F openflow10 del-flows br0 out_port=2])
+(grep -v 'output:2' flows.txt; echo 'OFPST_FLOW reply:') > expout
+AT_CHECK([ovs-ofctl -F openflow10 dump-flows br0 | ofctl_strip | sort], [0],
+ [expout])
+
+AT_CHECK([ovs-ofctl -F openflow10 del-flows br0 out_port=3])
+(grep -v 'output:[[23]]' flows.txt; echo 'OFPST_FLOW reply:') > expout
+AT_CHECK([ovs-ofctl -F openflow10 dump-flows br0 | ofctl_strip | sort], [0],
+ [expout])
+
+AT_CHECK([ovs-ofctl -F openflow10 del-flows br0 out_port=1])
+(grep -v 'output:[[123]]' flows.txt; echo 'OFPST_FLOW reply:') > expout
+AT_CHECK([ovs-ofctl -F openflow10 dump-flows br0 | ofctl_strip | sort], [0],
+ [expout])
+
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - flow_mod with out_port matching (OpenFlow 1.1)])
+OVS_VSWITCHD_START
+AT_DATA([flows.txt], [dnl
+ in_port=1 actions=output:2
+ in_port=2 actions=output:1,write_actions(output:2,output:3)
+ in_port=3 actions=output:3,output:1,write_actions(output:2)
+ in_port=4 actions=drop
+ in_port=5 actions=write_actions(output:3)
+ in_port=6 actions=output:1
+])
+AT_CHECK([ovs-ofctl -O OpenFlow11 add-flows br0 flows.txt])
+(cat flows.txt; echo 'OFPST_FLOW reply (OF1.1):') > expout
+AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip | sort], [0],
+ [expout])
+
+(grep 'output:2' flows.txt; echo 'OFPST_FLOW reply (OF1.1):') > expout
+AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 out_port=2 | ofctl_strip | sort], [0], [expout])
+
+AT_CHECK([ovs-ofctl -O OpenFlow11 del-flows br0 out_port=2])
+(grep -v 'output:2' flows.txt; echo 'OFPST_FLOW reply (OF1.1):') > expout
+AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip | sort], [0],
+ [expout])
+
+AT_CHECK([ovs-ofctl -O OpenFlow11 del-flows br0 out_port=3])
+(grep -v 'output:[[23]]' flows.txt; echo 'OFPST_FLOW reply (OF1.1):') > expout
+AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip | sort], [0],
+ [expout])
+
+AT_CHECK([ovs-ofctl -O OpenFlow11 del-flows br0 out_port=1])
+(grep -v 'output:[[123]]' flows.txt; echo 'OFPST_FLOW reply (OF1.1):') > expout
+AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip | sort], [0],
+ [expout])
+
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - flow_mod with out_group matching (OpenFlow 1.1)])
+OVS_VSWITCHD_START
+AT_DATA([groups.txt], [dnl
+group_id=1,type=all,bucket=output:10
+group_id=2,type=all,bucket=output:10
+group_id=3,type=all,bucket=output:10
+])
+AT_CHECK([ovs-ofctl -O OpenFlow11 add-groups br0 groups.txt])
+AT_DATA([flows.txt], [dnl
+ in_port=1 actions=group:2,output:5
+ in_port=2 actions=group:1,write_actions(group:2,group:3,output:6)
+ in_port=3 actions=group:3,group:1,write_actions(group:2,output:3)
+ in_port=4 actions=output:4
+ in_port=5 actions=write_actions(output:4,group:3)
+ in_port=6 actions=group:1
+])
+AT_CHECK([ovs-ofctl -O OpenFlow11 add-flows br0 flows.txt])
+(cat flows.txt; echo 'OFPST_FLOW reply (OF1.1):') > expout
+AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip | sort], [0],
+ [expout])
+
+(grep 'output:3' flows.txt | grep 'group:2'; echo 'OFPST_FLOW reply (OF1.1):') > expout
+AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 out_port=3,out_group=2 | ofctl_strip | sort], [0], [expout])
+
+AT_CHECK([ovs-ofctl -O OpenFlow11 del-flows br0 out_group=2])
+(grep -v 'group:2' flows.txt; echo 'OFPST_FLOW reply (OF1.1):') > expout
+AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip | sort], [0],
+ [expout])
+
+AT_CHECK([ovs-ofctl -O OpenFlow11 del-flows br0 out_group=3])
+(grep -v 'group:[[23]]' flows.txt; echo 'OFPST_FLOW reply (OF1.1):') > expout
+AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip | sort], [0],
+ [expout])
+
+AT_CHECK([ovs-ofctl -O OpenFlow11 del-flows br0 out_group=1])
+(grep -v 'group:[[123]]' flows.txt; echo 'OFPST_FLOW reply (OF1.1):') > expout
+AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip | sort], [0],
+ [expout])
+
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
AT_SETUP([ofproto - flow table configuration (OpenFlow 1.0)])
OVS_VSWITCHD_START
# Check the default configuration.
-(echo "OFPST_TABLE reply (xid=0x2): 254 tables
- 0: classifier: wild=0x3fffff, max=1000000, active=0
- lookup=0, matched=0"
- x=1
- while test $x -lt 254; do
- printf " %d: %-8s: wild=0x3fffff, max=1000000, active=0
- lookup=0, matched=0
-" $x table$x
- x=`expr $x + 1`
- done) > expout
+head_table() {
+ printf 'OFPST_TABLE reply (xid=0x2):
+ table 0 ("%s"):
+ active=0, lookup=0, matched=0
+ max_entries=1000000
+ matching:
+ in_port: exact match or wildcard
+ eth_src: exact match or wildcard
+ eth_dst: exact match or wildcard
+ eth_type: exact match or wildcard
+ vlan_vid: exact match or wildcard
+ vlan_pcp: exact match or wildcard
+ ip_src: exact match or wildcard
+ ip_dst: exact match or wildcard
+ nw_proto: exact match or wildcard
+ nw_tos: exact match or wildcard
+ tcp_src: exact match or wildcard
+ tcp_dst: exact match or wildcard
+
+' $1
+}
+ditto() {
+ for i in `seq $1 $2`; do
+ printf ' table %d ("table%d"): ditto\n' $i $i
+ done
+}
+(head_table classifier; ditto 1 253) > expout
AT_CHECK([ovs-ofctl dump-tables br0], [0], [expout])
# Change the configuration.
AT_CHECK(
<1>
])
# Check that the configuration was updated.
-mv expout orig-expout
-(echo "OFPST_TABLE reply (xid=0x2): 254 tables
- 0: main : wild=0x3fffff, max=1000000, active=0
- lookup=0, matched=0
- 1: table1 : wild=0x3fffff, max= 1024, active=0
- lookup=0, matched=0"
- tail -n +6 orig-expout) > expout
+(head_table main; echo ' table 1 ("table1"):
+ active=0, lookup=0, matched=0
+ max_entries=1024
+ (same matching)
+
+ table 2 ("table2"):
+ active=0, lookup=0, matched=0
+ max_entries=1000000
+ (same matching)
+'; ditto 3 253) > expout
AT_CHECK([ovs-ofctl dump-tables br0], [0], [expout])
OVS_VSWITCHD_STOP
AT_CLEANUP
-AT_SETUP([ofproto - flow table configuration (OpenFlow 1.2)])
-OVS_VSWITCHD_START
-# Check the default configuration.
-(mid="wild=0xfffffffff, max=1000000,"
- tail="
- lookup=0, matched=0
- match=0xfffffffff, instructions=0x00000007, config=0x00000003
- write_actions=0x00000000, apply_actions=0x00000000
- write_setfields=0x0000000fffffffff
- apply_setfields=0x0000000fffffffff
- metadata_match=0xffffffffffffffff
- metadata_write=0xffffffffffffffff"
- echo "OFPST_TABLE reply (OF1.2) (xid=0x2): 254 tables
- 0: classifier: $mid active=0$tail"
- x=1
- while test $x -lt 254; do
- printf " %d: %-8s: $mid active=0$tail
-" $x table$x
- x=`expr $x + 1`
- done) > expout
+dnl In-band and fail-open add "hidden rules" to table 0. These rules shouldn't
+dnl be visible to OpenFlow. This test checks that "dump-flows" and
+dnl "dump-tables" don't make them visible.
+AT_SETUP([ofproto - hidden rules not in table stats])
+# Use an IP address for a controller that won't actually exist: we
+# want to create in-band rules but we do not want to actually connect
+# to a controller (because that could mess about with our test). The
+# Class E range 240.0.0.0 - 255.255.255.255 seems like a good choice.
+OVS_VSWITCHD_START([set-controller br0 tcp:240.0.0.1:6653])
+for i in 1 2 3 4 5; do ovs-appctl time/warp 1000; done
+
+# Check that no hidden flows are visible in OpenFlow.
+AT_CHECK([ovs-ofctl dump-flows br0], [0], [NXST_FLOW reply (xid=0x4):
+])
+
+# Check that some hidden flows related to 240.0.0.1 are actually in table 0.
+#
+# We discard flows that mention table_id because we only want table 0 flows,
+# which in OVS is implied by the absence of a table_id.
+AT_CHECK([ovs-appctl bridge/dump-flows br0], [0], [stdout])
+AT_CHECK([test `grep '240\.0\.0\.1' stdout | grep -v table_id= | wc -l` -gt 0])
+
+# Check that dump-tables doesn't count the hidden flows.
+head_table() {
+ printf 'OFPST_TABLE reply (xid=0x2):
+ table 0 ("%s"):
+ active=0, lookup=0, matched=0
+ max_entries=1000000
+ matching:
+ in_port: exact match or wildcard
+ eth_src: exact match or wildcard
+ eth_dst: exact match or wildcard
+ eth_type: exact match or wildcard
+ vlan_vid: exact match or wildcard
+ vlan_pcp: exact match or wildcard
+ ip_src: exact match or wildcard
+ ip_dst: exact match or wildcard
+ nw_proto: exact match or wildcard
+ nw_tos: exact match or wildcard
+ tcp_src: exact match or wildcard
+ tcp_dst: exact match or wildcard
+
+' $1
+}
+ditto() {
+ for i in `seq $1 $2`; do
+ printf ' table %d ("table%d"): ditto\n' $i $i
+ done
+}
+(head_table classifier; ditto 1 253) > expout
+AT_CHECK([ovs-ofctl dump-tables br0], [0], [expout])
+OVS_VSWITCHD_STOP(["/240\.0\.0\.1/d"])
+AT_CLEANUP
+
+AT_SETUP([ofproto - flow table configuration (OpenFlow 1.2)])
+OVS_VSWITCHD_START
+# Check the default configuration.
+head_table() {
+ printf 'OFPST_TABLE reply (OF1.2) (xid=0x2):
+ table 0 ("%s"):
+ active=0, lookup=0, matched=0
+ metadata: match=0xffffffffffffffff write=0xffffffffffffffff
+ config=controller
+ max_entries=1000000
+ instructions (table miss and others):
+ instructions: apply_actions,clear_actions,write_actions,write_metadata,goto_table
+ Write-Actions and Apply-Actions features:
+ actions: output group set_field strip_vlan push_vlan mod_nw_ttl dec_ttl set_mpls_ttl dec_mpls_ttl push_mpls pop_mpls set_queue
+ supported on Set-Field: metadata in_port_oxm eth_src eth_dst vlan_vid vlan_pcp mpls_label mpls_tc ip_src ip_dst ipv6_src ipv6_dst ipv6_label ip_dscp nw_ecn arp_op arp_spa arp_tpa arp_sha arp_tha tcp_src tcp_dst udp_src udp_dst sctp_src sctp_dst icmp_type icmp_code icmpv6_type icmpv6_code nd_target nd_sll nd_tll
+ matching:
+ metadata: exact match or wildcard
+ in_port_oxm: exact match or wildcard
+ eth_src: exact match or wildcard
+ eth_dst: exact match or wildcard
+ eth_type: exact match or wildcard
+ vlan_vid: exact match or wildcard
+ vlan_pcp: exact match or wildcard
+ mpls_label: exact match or wildcard
+ mpls_tc: exact match or wildcard
+ ip_src: exact match or wildcard
+ ip_dst: exact match or wildcard
+ ipv6_src: exact match or wildcard
+ ipv6_dst: exact match or wildcard
+ ipv6_label: exact match or wildcard
+ nw_proto: exact match or wildcard
+ ip_dscp: exact match or wildcard
+ nw_ecn: exact match or wildcard
+ arp_op: exact match or wildcard
+ arp_spa: exact match or wildcard
+ arp_tpa: exact match or wildcard
+ arp_sha: exact match or wildcard
+ arp_tha: exact match or wildcard
+ tcp_src: exact match or wildcard
+ tcp_dst: exact match or wildcard
+ udp_src: exact match or wildcard
+ udp_dst: exact match or wildcard
+ sctp_src: exact match or wildcard
+ sctp_dst: exact match or wildcard
+ icmp_type: exact match or wildcard
+ icmp_code: exact match or wildcard
+ icmpv6_type: exact match or wildcard
+ icmpv6_code: exact match or wildcard
+ nd_target: exact match or wildcard
+ nd_sll: exact match or wildcard
+ nd_tll: exact match or wildcard
+
+' $1
+}
+ditto() {
+ for i in `seq $1 $2`; do
+ printf ' table %d ("table%d"): ditto\n' $i $i
+ done
+}
+tail_table() {
+ printf ' table 253 ("table253"):
+ active=0, lookup=0, matched=0
+ metadata: match=0xffffffffffffffff write=0xffffffffffffffff
+ config=controller
+ max_entries=1000000
+ instructions (table miss and others):
+ instructions: apply_actions,clear_actions,write_actions,write_metadata
+ (same actions)
+ (same matching)
+'
+}
+(head_table classifier; ditto 1 252; tail_table) > expout
AT_CHECK([ovs-ofctl -O OpenFlow12 dump-tables br0], [0], [expout])
# Change the configuration.
AT_CHECK(
<1>
])
# Check that the configuration was updated.
-mv expout orig-expout
-(echo "OFPST_TABLE reply (OF1.2) (xid=0x2): 254 tables
- 0: main : wild=0xfffffffff, max=1000000, active=0"
- tail -n +3 orig-expout | head -7
- echo " 1: table1 : wild=0xfffffffff, max= 1024, active=0"
- tail -n +11 orig-expout) > expout
+(head_table main; echo ' table 1 ("table1"):
+ active=0, lookup=0, matched=0
+ metadata: match=0xffffffffffffffff write=0xffffffffffffffff
+ config=controller
+ max_entries=1024
+ (same instructions)
+ (same matching)
+
+ table 2 ("table2"):
+ active=0, lookup=0, matched=0
+ metadata: match=0xffffffffffffffff write=0xffffffffffffffff
+ config=controller
+ max_entries=1000000
+ (same instructions)
+ (same matching)
+'; ditto 3 252; tail_table) > expout
AT_CHECK([ovs-ofctl -O OpenFlow12 dump-tables br0], [0], [expout])
OVS_VSWITCHD_STOP
AT_CLEANUP
+AT_SETUP([ofproto - table features (OpenFlow 1.3)])
+OVS_VSWITCHD_START
+head_table () {
+ printf ' table 0 ("%s"):
+ metadata: match=0xffffffffffffffff write=0xffffffffffffffff
+ max_entries=1000000
+ instructions (table miss and others):
+ next tables: 1-253
+ instructions: meter,apply_actions,clear_actions,write_actions,write_metadata,goto_table
+ Write-Actions and Apply-Actions features:
+ actions: output group set_field strip_vlan push_vlan mod_nw_ttl dec_ttl set_mpls_ttl dec_mpls_ttl push_mpls pop_mpls set_queue
+ supported on Set-Field: tun_id tun_src tun_dst tun_ipv6_src tun_ipv6_dst tun_flags tun_gbp_id tun_gbp_flags tun_metadata0 dnl
+tun_metadata1 tun_metadata2 tun_metadata3 tun_metadata4 tun_metadata5 tun_metadata6 tun_metadata7 tun_metadata8 tun_metadata9 tun_metadata10 tun_metadata11 tun_metadata12 tun_metadata13 tun_metadata14 tun_metadata15 tun_metadata16 tun_metadata17 tun_metadata18 tun_metadata19 tun_metadata20 tun_metadata21 tun_metadata22 tun_metadata23 tun_metadata24 tun_metadata25 tun_metadata26 tun_metadata27 tun_metadata28 tun_metadata29 tun_metadata30 tun_metadata31 tun_metadata32 tun_metadata33 tun_metadata34 tun_metadata35 tun_metadata36 tun_metadata37 tun_metadata38 tun_metadata39 tun_metadata40 tun_metadata41 tun_metadata42 tun_metadata43 tun_metadata44 tun_metadata45 tun_metadata46 tun_metadata47 tun_metadata48 tun_metadata49 tun_metadata50 tun_metadata51 tun_metadata52 tun_metadata53 tun_metadata54 tun_metadata55 tun_metadata56 tun_metadata57 tun_metadata58 tun_metadata59 tun_metadata60 tun_metadata61 tun_metadata62 tun_metadata63 dnl
+metadata in_port in_port_oxm pkt_mark ct_mark ct_label reg0 reg1 reg2 reg3 reg4 reg5 reg6 reg7 xreg0 xreg1 xreg2 xreg3 eth_src eth_dst vlan_tci vlan_vid vlan_pcp mpls_label mpls_tc ip_src ip_dst ipv6_src ipv6_dst ipv6_label nw_tos ip_dscp nw_ecn nw_ttl arp_op arp_spa arp_tpa arp_sha arp_tha tcp_src tcp_dst udp_src udp_dst sctp_src sctp_dst icmp_type icmp_code icmpv6_type icmpv6_code nd_target nd_sll nd_tll
+ matching:
+ dp_hash: arbitrary mask
+ recirc_id: exact match or wildcard
+ conj_id: exact match or wildcard
+ tun_id: arbitrary mask
+ tun_src: arbitrary mask
+ tun_dst: arbitrary mask
+ tun_ipv6_src: arbitrary mask
+ tun_ipv6_dst: arbitrary mask
+ tun_flags: arbitrary mask
+ tun_gbp_id: arbitrary mask
+ tun_gbp_flags: arbitrary mask
+ tun_metadata0: arbitrary mask
+ tun_metadata1: arbitrary mask
+ tun_metadata2: arbitrary mask
+ tun_metadata3: arbitrary mask
+ tun_metadata4: arbitrary mask
+ tun_metadata5: arbitrary mask
+ tun_metadata6: arbitrary mask
+ tun_metadata7: arbitrary mask
+ tun_metadata8: arbitrary mask
+ tun_metadata9: arbitrary mask
+ tun_metadata10: arbitrary mask
+ tun_metadata11: arbitrary mask
+ tun_metadata12: arbitrary mask
+ tun_metadata13: arbitrary mask
+ tun_metadata14: arbitrary mask
+ tun_metadata15: arbitrary mask
+ tun_metadata16: arbitrary mask
+ tun_metadata17: arbitrary mask
+ tun_metadata18: arbitrary mask
+ tun_metadata19: arbitrary mask
+ tun_metadata20: arbitrary mask
+ tun_metadata21: arbitrary mask
+ tun_metadata22: arbitrary mask
+ tun_metadata23: arbitrary mask
+ tun_metadata24: arbitrary mask
+ tun_metadata25: arbitrary mask
+ tun_metadata26: arbitrary mask
+ tun_metadata27: arbitrary mask
+ tun_metadata28: arbitrary mask
+ tun_metadata29: arbitrary mask
+ tun_metadata30: arbitrary mask
+ tun_metadata31: arbitrary mask
+ tun_metadata32: arbitrary mask
+ tun_metadata33: arbitrary mask
+ tun_metadata34: arbitrary mask
+ tun_metadata35: arbitrary mask
+ tun_metadata36: arbitrary mask
+ tun_metadata37: arbitrary mask
+ tun_metadata38: arbitrary mask
+ tun_metadata39: arbitrary mask
+ tun_metadata40: arbitrary mask
+ tun_metadata41: arbitrary mask
+ tun_metadata42: arbitrary mask
+ tun_metadata43: arbitrary mask
+ tun_metadata44: arbitrary mask
+ tun_metadata45: arbitrary mask
+ tun_metadata46: arbitrary mask
+ tun_metadata47: arbitrary mask
+ tun_metadata48: arbitrary mask
+ tun_metadata49: arbitrary mask
+ tun_metadata50: arbitrary mask
+ tun_metadata51: arbitrary mask
+ tun_metadata52: arbitrary mask
+ tun_metadata53: arbitrary mask
+ tun_metadata54: arbitrary mask
+ tun_metadata55: arbitrary mask
+ tun_metadata56: arbitrary mask
+ tun_metadata57: arbitrary mask
+ tun_metadata58: arbitrary mask
+ tun_metadata59: arbitrary mask
+ tun_metadata60: arbitrary mask
+ tun_metadata61: arbitrary mask
+ tun_metadata62: arbitrary mask
+ tun_metadata63: arbitrary mask
+ metadata: arbitrary mask
+ in_port: exact match or wildcard
+ in_port_oxm: exact match or wildcard
+ actset_output: exact match or wildcard
+ pkt_mark: arbitrary mask
+ ct_state: arbitrary mask
+ ct_zone: exact match or wildcard
+ ct_mark: arbitrary mask
+ ct_label: arbitrary mask
+ reg0: arbitrary mask
+ reg1: arbitrary mask
+ reg2: arbitrary mask
+ reg3: arbitrary mask
+ reg4: arbitrary mask
+ reg5: arbitrary mask
+ reg6: arbitrary mask
+ reg7: arbitrary mask
+ xreg0: arbitrary mask
+ xreg1: arbitrary mask
+ xreg2: arbitrary mask
+ xreg3: arbitrary mask
+ eth_src: arbitrary mask
+ eth_dst: arbitrary mask
+ eth_type: exact match or wildcard
+ vlan_tci: arbitrary mask
+ vlan_vid: arbitrary mask
+ vlan_pcp: exact match or wildcard
+ mpls_label: exact match or wildcard
+ mpls_tc: exact match or wildcard
+ mpls_bos: exact match or wildcard
+ ip_src: arbitrary mask
+ ip_dst: arbitrary mask
+ ipv6_src: arbitrary mask
+ ipv6_dst: arbitrary mask
+ ipv6_label: arbitrary mask
+ nw_proto: exact match or wildcard
+ nw_tos: exact match or wildcard
+ ip_dscp: exact match or wildcard
+ nw_ecn: exact match or wildcard
+ nw_ttl: exact match or wildcard
+ ip_frag: arbitrary mask
+ arp_op: exact match or wildcard
+ arp_spa: arbitrary mask
+ arp_tpa: arbitrary mask
+ arp_sha: arbitrary mask
+ arp_tha: arbitrary mask
+ tcp_src: arbitrary mask
+ tcp_dst: arbitrary mask
+ tcp_flags: arbitrary mask
+ udp_src: arbitrary mask
+ udp_dst: arbitrary mask
+ sctp_src: arbitrary mask
+ sctp_dst: arbitrary mask
+ icmp_type: exact match or wildcard
+ icmp_code: exact match or wildcard
+ icmpv6_type: exact match or wildcard
+ icmpv6_code: exact match or wildcard
+ nd_target: arbitrary mask
+ nd_sll: arbitrary mask
+ nd_tll: arbitrary mask
+
+' $1
+}
+ditto() {
+ printf ' table %d ("%s"):
+ metadata: match=0xffffffffffffffff write=0xffffffffffffffff
+ max_entries=%d
+ instructions (table miss and others):
+ next tables: %d-253
+ (same instructions)
+ (same actions)
+ (same matching)
+
+' $1 $2 $3 `expr $1 + 1`
+}
+tail_tables() {
+echo ' table 252 ("table252"):
+ metadata: match=0xffffffffffffffff write=0xffffffffffffffff
+ max_entries=1000000
+ instructions (table miss and others):
+ next tables: 253
+ (same instructions)
+ (same actions)
+ (same matching)
+
+ table 253 ("table253"):
+ metadata: match=0xffffffffffffffff write=0xffffffffffffffff
+ max_entries=1000000
+ instructions (table miss and others):
+ instructions: meter,apply_actions,clear_actions,write_actions,write_metadata
+ (same actions)
+ (same matching)
+'
+}
+(head_table classifier
+ for i in `seq 1 251`; do
+ ditto $i table$i 1000000
+ done
+ tail_tables) > expout
+AT_CHECK([ovs-ofctl -O OpenFlow13 dump-table-features br0], [0], [expout])
+# Change the configuration.
+AT_CHECK(
+ [ovs-vsctl \
+ -- --id=@t0 create Flow_Table name=main \
+ -- --id=@t1 create Flow_Table flow-limit=1024 \
+ -- set bridge br0 'flow_tables={1=@t1,0=@t0}' \
+ | ${PERL} $srcdir/uuidfilt.pl],
+ [0], [<0>
+<1>
+])
+# Check that the configuration was updated.
+(head_table main
+ ditto 1 table1 1024
+ for i in `seq 2 251`; do
+ ditto $i table$i 1000000
+ done
+ tail_tables) > expout
+AT_CHECK([ovs-ofctl -O OpenFlow13 dump-table-features br0], [0], [expout])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - table description (OpenFlow 1.4)])
+OVS_VSWITCHD_START
+(x=0
+ while test $x -lt 254; do
+ y=`expr $x + 1`
+ echo " table $x:
+ eviction=off eviction_flags=OTHER|IMPORTANCE|LIFETIME
+ vacancy=off"
+ x=$y
+ done) > expout
+AT_CHECK([ovs-ofctl -O OpenFlow14 dump-table-desc br0 | sed '/^$/d
+/^OFPST_TABLE_DESC/d'], [0], [expout])
+
+# Change the configuration.
+AT_CHECK([ovs-ofctl -O Openflow14 mod-table br0 0 evict])
+# Check that the configuration was updated.
+mv expout orig-expout
+sed -e '2s/eviction=off/eviction=on/' <orig-expout > expout
+AT_CHECK([ovs-ofctl -O OpenFlow14 dump-table-desc br0 | sed '/^$/d
+/^OFPST_TABLE_DESC/d'], [0], [expout])
+
+AT_CHECK([ovs-ofctl -O Openflow14 mod-table br0 0 vacancy:20,80])
+# Check that the configuration was updated.
+mv expout orig-expout
+sed -e '3s/vacancy=off/vacancy=on vacancy_down=20% vacancy_up=80% vacancy=100%/' <orig-expout > expout
+AT_CHECK([ovs-ofctl -O OpenFlow14 dump-table-desc br0 | sed '/^$/d
+/^OFPST_TABLE_DESC/d'], [0], [expout])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
AT_SETUP([ofproto - hard limits on flow table size (OpenFlow 1.0)])
OVS_VSWITCHD_START
# Configure a maximum of 4 flows.
in_port=5 actions=drop
OFPST_FLOW reply (OF1.2):
])
-# In Open Flow 1.2 a mod-flow does not ever add a flow and thus
+# In OpenFlow 1.2 a mod-flow does not ever add a flow and thus
# has no effect on eviction
AT_CHECK([ovs-ofctl -O OpenFlow12 mod-flows br0 in_port=6,actions=drop])
AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 in_port=4,actions=normal])
OVS_VSWITCHD_STOP
AT_CLEANUP
+AT_SETUP([ofproto - eviction using importance upon table overflow (OpenFlow 1.4)])
+OVS_VSWITCHD_START
+# Configure a maximum of 4 flows.
+AT_CHECK(
+ [ovs-vsctl \
+ -- --id=@t0 create Flow_Table name=evict flow-limit=4 \
+ -- set bridge br0 flow_tables:0=@t0 \
+ | ${PERL} $srcdir/uuidfilt.pl],
+ [0], [<0>
+])
+# Use mod-table to turn on eviction just to demonstrate that it works.
+AT_CHECK([ovs-ofctl -O OpenFlow14 mod-table br0 0 evict])
+# Add 4 flows.
+for in_port in 4 3 2 1; do
+ ovs-ofctl -O Openflow14 add-flow br0 importance=$((in_port + 30)),priority=$((in_port + 5)),hard_timeout=$((in_port + 500)),actions=drop
+done
+AT_CHECK([ovs-ofctl -O Openflow14 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ hard_timeout=501, importance=31, priority=6 actions=drop
+ hard_timeout=502, importance=32, priority=7 actions=drop
+ hard_timeout=503, importance=33, priority=8 actions=drop
+ hard_timeout=504, importance=34, priority=9 actions=drop
+OFPST_FLOW reply (OF1.4):
+])
+# Adding another flow will cause the one with lowest importance to be evicted.
+AT_CHECK([ovs-ofctl -O Openflow14 add-flow br0 hard_timeout=505,importance=35,priority=10,in_port=2,actions=drop])
+AT_CHECK([ovs-ofctl -O Openflow14 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ hard_timeout=502, importance=32, priority=7 actions=drop
+ hard_timeout=503, importance=33, priority=8 actions=drop
+ hard_timeout=504, importance=34, priority=9 actions=drop
+ hard_timeout=505, importance=35, priority=10,in_port=2 actions=drop
+OFPST_FLOW reply (OF1.4):
+])
+# Disable the Eviction configuration.
+AT_CHECK([ovs-ofctl -O OpenFlow14 mod-table br0 0 noevict])
+# Adding another flow will cause the system to give error for FULL TABLE.
+AT_CHECK([ovs-ofctl -O Openflow14 add-flow br0 hard_timeout=506,importance=36,priority=11,actions=drop],[1], [], [stderr])
+AT_CHECK([head -n 1 stderr | ofctl_strip], [0],
+ [OFPT_ERROR (OF1.4): OFPFMFC_TABLE_FULL
+])
+#Dump flows. It should show only the old values
+AT_CHECK([ovs-ofctl -O Openflow14 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ hard_timeout=502, importance=32, priority=7 actions=drop
+ hard_timeout=503, importance=33, priority=8 actions=drop
+ hard_timeout=504, importance=34, priority=9 actions=drop
+ hard_timeout=505, importance=35, priority=10,in_port=2 actions=drop
+OFPST_FLOW reply (OF1.4):
+])
+# mod-flow that would modify a flow will be done successfully.
+AT_CHECK([ovs-ofctl -O Openflow14 mod-flows br0 in_port=2,actions=NORMAL])
+AT_CHECK([ovs-ofctl -O Openflow14 dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ hard_timeout=502, importance=32, priority=7 actions=drop
+ hard_timeout=503, importance=33, priority=8 actions=drop
+ hard_timeout=504, importance=34, priority=9 actions=drop
+ hard_timeout=505, importance=35, priority=10,in_port=2 actions=NORMAL
+OFPST_FLOW reply (OF1.4):
+])
+# Also a mod-flow that would add a flow will be refused.
+AT_CHECK([ovs-ofctl mod-flows br0 in_port=5,actions=drop], [1], [], [stderr])
+AT_CHECK([head -n 1 stderr | ofctl_strip], [0],
+ [OFPT_ERROR: OFPFMFC_TABLE_FULL
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
AT_SETUP([ofproto - eviction upon table overflow, with fairness (OpenFlow 1.0)])
OVS_VSWITCHD_START
# Configure a maximum of 4 flows.
AT_SETUP([ofproto - asynchronous message control (OpenFlow 1.0)])
OVS_VSWITCHD_START
-AT_CHECK([ovs-ofctl -P openflow10 monitor br0 --detach --no-chdir --pidfile])
+AT_CHECK([ovs-ofctl -P standard monitor br0 --detach --no-chdir --pidfile])
check_async () {
printf '\n\n--- check_async %d ---\n\n\n' $1
shift
ovs-ofctl -v packet-out br0 controller controller '0001020304050010203040501234'
if test X"$1" = X"OFPR_ACTION"; then shift;
echo >>expout "OFPT_PACKET_IN: total_len=14 in_port=CONTROLLER (via action) data_len=14 (unbuffered)
-metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234"
+vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234"
fi
# OFPT_PACKET_IN, OFPR_NO_MATCH (controller_id=123)
ovs-ofctl -v packet-out br0 controller 'controller(reason=no_match,id=123)' '0001020304050010203040501234'
if test X"$1" = X"OFPR_NO_MATCH"; then shift;
echo >>expout "OFPT_PACKET_IN: total_len=14 in_port=CONTROLLER (via no_match) data_len=14 (unbuffered)
-metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234"
+vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234"
fi
# OFPT_PACKET_IN, OFPR_INVALID_TTL (controller_id=0)
- ovs-ofctl packet-out br0 controller dec_ttl '002583dfb4000026b98cb0f908004500003fb7e200000011339bac11370dac100002d7730035002b8f6d86fb0100000100000000000006626c702d7873066e696369726103636f6d00000f00'
+ ovs-ofctl packet-out br0 controller dec_ttl '002583dfb4000026b98cb0f908004500003eb7e200000011339bac11370dac100002d7730035002b8f6d86fb0100000100000000000006626c702d7873066e696369726103636f6d00000f00'
if test X"$1" = X"OFPR_INVALID_TTL"; then shift;
echo >>expout "OFPT_PACKET_IN: total_len=76 in_port=CONTROLLER (via invalid_ttl) data_len=76 (unbuffered)
-udp,metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:26:b9:8c:b0:f9,dl_dst=00:25:83:df:b4:00,nw_src=172.17.55.13,nw_dst=172.16.0.2,nw_tos=0,nw_ecn=0,nw_ttl=0,tp_src=55155,tp_dst=53 udp_csum:8f6d"
+udp,vlan_tci=0x0000,dl_src=00:26:b9:8c:b0:f9,dl_dst=00:25:83:df:b4:00,nw_src=172.17.55.13,nw_dst=172.16.0.2,nw_tos=0,nw_ecn=0,nw_ttl=0,tp_src=55155,tp_dst=53 udp_csum:8f6d"
fi
# OFPT_PORT_STATUS, OFPPR_ADD
AT_SETUP([ofproto - asynchronous message control (OpenFlow 1.2)])
OVS_VSWITCHD_START
-AT_CHECK([ovs-ofctl -O OpenFlow12 monitor br0 --detach --no-chdir --pidfile])
+AT_CHECK([ovs-ofctl -O OpenFlow12 -P standard monitor br0 --detach --no-chdir --pidfile])
check_async () {
printf '\n\n--- check_async %d ---\n\n\n' $1
INDEX=$1
ovs-ofctl -O OpenFlow12 -v packet-out br0 none controller '0001020304050010203040501234'
if test X"$1" = X"OFPR_ACTION"; then shift;
echo >>expout "OFPT_PACKET_IN (OF1.2): total_len=14 in_port=ANY (via action) data_len=14 (unbuffered)
-metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234"
+vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234"
fi
# OFPT_PACKET_IN, OFPR_NO_MATCH (controller_id=123)
ovs-ofctl -O OpenFlow12 -v packet-out br0 none 'controller(reason=no_match,id=123)' '0001020304050010203040501234'
if test X"$1" = X"OFPR_NO_MATCH"; then shift;
echo >>expout "OFPT_PACKET_IN (OF1.2): total_len=14 in_port=ANY (via no_match) data_len=14 (unbuffered)
-metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234"
+vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234"
fi
# OFPT_PACKET_IN, OFPR_INVALID_TTL (controller_id=0)
- ovs-ofctl -O OpenFlow12 packet-out br0 none dec_ttl '002583dfb4000026b98cb0f908004500003fb7e200000011339bac11370dac100002d7730035002b8f6d86fb0100000100000000000006626c702d7873066e696369726103636f6d00000f00'
+ ovs-ofctl -O OpenFlow12 packet-out br0 none dec_ttl '002583dfb4000026b98cb0f908004500003eb7e200000011339bac11370dac100002d7730035002b8f6d86fb0100000100000000000006626c702d7873066e696369726103636f6d00000f00'
if test X"$1" = X"OFPR_INVALID_TTL"; then shift;
echo >>expout "OFPT_PACKET_IN (OF1.2): total_len=76 in_port=ANY (via invalid_ttl) data_len=76 (unbuffered)
-udp,metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:26:b9:8c:b0:f9,dl_dst=00:25:83:df:b4:00,nw_src=172.17.55.13,nw_dst=172.16.0.2,nw_tos=0,nw_ecn=0,nw_ttl=0,tp_src=55155,tp_dst=53 udp_csum:8f6d"
+udp,vlan_tci=0x0000,dl_src=00:26:b9:8c:b0:f9,dl_dst=00:25:83:df:b4:00,nw_src=172.17.55.13,nw_dst=172.16.0.2,nw_tos=0,nw_ecn=0,nw_ttl=0,tp_src=55155,tp_dst=53 udp_csum:8f6d"
fi
# OFPT_PORT_STATUS, OFPPR_ADD
fi
AT_FAIL_IF([test X"$1" != X])
- ovs-appctl -t ovs-ofctl ofctl/barrier
- echo >>expout "OFPT_BARRIER_REPLY (OF1.2):"
+ sleep 1
AT_CHECK(
[[sed '
AT_SETUP([ofproto - asynchronous message control (OpenFlow 1.3)])
OVS_VSWITCHD_START
-AT_CHECK([ovs-ofctl -O OpenFlow13 monitor br0 --detach --no-chdir --pidfile])
+AT_CHECK([ovs-ofctl -O OpenFlow13 -P standard monitor br0 --detach --no-chdir --pidfile])
check_async () {
printf '\n\n--- check_async %d ---\n\n\n' $1
INDEX=$1
ovs-ofctl -O OpenFlow13 -v packet-out br0 none controller '0001020304050010203040501234'
if test X"$1" = X"OFPR_ACTION"; then shift;
echo >>expout "OFPT_PACKET_IN (OF1.3): total_len=14 in_port=ANY (via action) data_len=14 (unbuffered)
-metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234"
+vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234"
fi
# OFPT_PACKET_IN, OFPR_NO_MATCH (controller_id=123)
ovs-ofctl -O OpenFlow13 -v packet-out br0 none 'controller(reason=no_match,id=123)' '0001020304050010203040501234'
if test X"$1" = X"OFPR_NO_MATCH"; then shift;
echo >>expout "OFPT_PACKET_IN (OF1.3): total_len=14 in_port=ANY (via no_match) data_len=14 (unbuffered)
-metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234"
+vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234"
fi
# OFPT_PACKET_IN, OFPR_INVALID_TTL (controller_id=0)
- ovs-ofctl -O OpenFlow13 packet-out br0 none dec_ttl '002583dfb4000026b98cb0f908004500003fb7e200000011339bac11370dac100002d7730035002b8f6d86fb0100000100000000000006626c702d7873066e696369726103636f6d00000f00'
+ ovs-ofctl -O OpenFlow13 packet-out br0 none dec_ttl '002583dfb4000026b98cb0f908004500003eb7e200000011339bac11370dac100002d7730035002b8f6d86fb0100000100000000000006626c702d7873066e696369726103636f6d00000f00'
if test X"$1" = X"OFPR_INVALID_TTL"; then shift;
echo >>expout "OFPT_PACKET_IN (OF1.3): total_len=76 in_port=ANY (via invalid_ttl) data_len=76 (unbuffered)
-udp,metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:26:b9:8c:b0:f9,dl_dst=00:25:83:df:b4:00,nw_src=172.17.55.13,nw_dst=172.16.0.2,nw_tos=0,nw_ecn=0,nw_ttl=0,tp_src=55155,tp_dst=53 udp_csum:8f6d"
+udp,vlan_tci=0x0000,dl_src=00:26:b9:8c:b0:f9,dl_dst=00:25:83:df:b4:00,nw_src=172.17.55.13,nw_dst=172.16.0.2,nw_tos=0,nw_ecn=0,nw_ttl=0,tp_src=55155,tp_dst=53 udp_csum:8f6d"
fi
# OFPT_PORT_STATUS, OFPPR_ADD
if test X"$1" = X"OFPRR_DELETE"; then shift;
echo >>expout "OFPT_FLOW_REMOVED (OF1.3): reason=delete table_id=0"
fi
+
+ # OFPT_FLOW_REMOVED, OFPRR_GROUP_DELETE
+ ovs-ofctl -O OpenFlow13 add-group br0 group_id=1234,type=all,bucket=output:10
+ ovs-ofctl -O OpenFlow13 add-flow br0 send_flow_rem,actions=group:1234
+ ovs-ofctl -O OpenFlow13 --strict del-groups br0 group_id=1234
+ if test X"$1" = X"OFPRR_DELETE"; then shift;
+ echo >>expout "OFPT_FLOW_REMOVED (OF1.3): reason=gropu_delete table_id=0"
+ fi
+
AT_FAIL_IF([test X"$1" != X])
ovs-appctl -t ovs-ofctl ofctl/barrier
OVS_VSWITCHD_STOP
AT_CLEANUP
+AT_SETUP([ofproto - asynchronous message control (OpenFlow 1.4)])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -O OpenFlow14 -P standard monitor br0 --detach --no-chdir --pidfile])
+check_async () {
+ printf '\n\n--- check_async %d ---\n\n\n' $1
+ INDEX=$1
+ shift
+
+ ovs-appctl -t ovs-ofctl ofctl/barrier
+ ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
+ : > expout
+
+ # OFPT_PACKET_IN, OFPR_ACTION (controller_id=0)
+ ovs-ofctl -O OpenFlow14 -v packet-out br0 none controller '0001020304050010203040501234'
+ if test X"$1" = X"OFPR_ACTION"; then shift;
+ echo >>expout "OFPT_PACKET_IN (OF1.4): total_len=14 in_port=ANY (via action) data_len=14 (unbuffered)
+vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234"
+ fi
+
+ # OFPT_PACKET_IN, OFPR_NO_MATCH (controller_id=123)
+ ovs-ofctl -O OpenFlow14 -v packet-out br0 none 'controller(reason=no_match,id=123)' '0001020304050010203040501234'
+ if test X"$1" = X"OFPR_NO_MATCH"; then shift;
+ echo >>expout "OFPT_PACKET_IN (OF1.4): total_len=14 in_port=ANY (via no_match) data_len=14 (unbuffered)
+vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234"
+ fi
+
+ # OFPT_PACKET_IN, OFPR_INVALID_TTL (controller_id=0)
+ ovs-ofctl -O OpenFlow14 packet-out br0 none dec_ttl '002583dfb4000026b98cb0f908004500003eb7e200000011339bac11370dac100002d7730035002b8f6d86fb0100000100000000000006626c702d7873066e696369726103636f6d00000f00'
+ if test X"$1" = X"OFPR_INVALID_TTL"; then shift;
+ echo >>expout "OFPT_PACKET_IN (OF1.4): total_len=76 in_port=ANY (via invalid_ttl) data_len=76 (unbuffered)
+udp,vlan_tci=0x0000,dl_src=00:26:b9:8c:b0:f9,dl_dst=00:25:83:df:b4:00,nw_src=172.17.55.13,nw_dst=172.16.0.2,nw_tos=0,nw_ecn=0,nw_ttl=0,tp_src=55155,tp_dst=53 udp_csum:8f6d"
+ fi
+
+# OFPT_PORT_STATUS, OFPPR_ADD
+ ovs-vsctl add-port br0 test -- set Interface test type=dummy
+ if test X"$1" = X"OFPPR_ADD"; then shift;
+ echo >>expout "OFPT_PORT_STATUS (OF1.4): ADD: ${INDEX}(test): addr:aa:55:aa:55:00:0x
+ config: PORT_DOWN
+ state: LINK_DOWN
+ speed: 0 Mbps now, 0 Mbps max"
+ fi
+
+ # OFPT_PORT_STATUS, OFPPR_MODIFY
+ ovs-ofctl -O OpenFlow14 -vwarn mod-port br0 test up
+ if test X"$1" = X"OFPPR_MODIFY"; then shift;
+ echo >>expout "OFPT_PORT_STATUS (OF1.4): MOD: ${INDEX}(test): addr:aa:55:aa:55:00:0x
+ config: 0
+ state: LINK_DOWN
+ speed: 0 Mbps now, 0 Mbps max
+OFPT_PORT_STATUS (OF1.4): MOD: ${INDEX}(test): addr:aa:55:aa:55:00:0x
+ config: 0
+ state: 0
+ speed: 0 Mbps now, 0 Mbps max"
+ fi
+
+ # OFPT_PORT_STATUS, OFPPR_DELETE
+ ovs-vsctl del-port br0 test
+ if test X"$1" = X"OFPPR_DELETE"; then shift;
+ echo >>expout "OFPT_PORT_STATUS (OF1.4): DEL: ${INDEX}(test): addr:aa:55:aa:55:00:0x
+ config: 0
+ state: 0
+ speed: 0 Mbps now, 0 Mbps max"
+ fi
+
+ # OFPT_FLOW_REMOVED, OFPRR_DELETE
+ ovs-ofctl -O OpenFlow14 add-flow br0 send_flow_rem,actions=drop
+ ovs-ofctl -O OpenFlow14 --strict del-flows br0 ''
+ if test X"$1" = X"OFPRR_DELETE"; then shift;
+ echo >>expout "OFPT_FLOW_REMOVED (OF1.4): reason=delete table_id=0"
+ fi
+
+ # OFPT_FLOW_REMOVED, OFPRR_GROUP_DELETE
+ ovs-ofctl -O OpenFlow14 add-group br0 group_id=1234,type=all,bucket=output:10
+ ovs-ofctl -O OpenFlow14 add-flow br0 send_flow_rem,actions=group:1234
+ ovs-ofctl -O OpenFlow14 --strict del-groups br0 group_id=1234
+ if test X"$1" = X"OFPRR_GROUP_DELETE"; then shift;
+ echo >>expout "OFPT_FLOW_REMOVED (OF1.4): reason=group_delete table_id=0"
+ fi
+
+ # OFPT_TABLE_STATUS, OFPTR_VACANCY_UP
+ if test X"$1" = X"OFPTR_VACANCY_UP"; then shift;
+ ovs-vsctl -- --id=@t1 create Flow_Table flow-limit=10 -- set bridge br0 flow_tables:1=@t1
+
+ # Turn on vacancy events, then add flows until we're full.
+ # With initial vacancy of 100% and vacancy_up of 80%, so that
+ # vacancy >= vacancy_up, this enables VACANY_DOWN events, so
+ # we get a single such message when vacancy dips below 20%.
+ ovs-ofctl -O OpenFlow14 mod-table br0 1 vacancy:20,80
+ ovs-ofctl -O OpenFlow14 add-flow br0 table=1,in_port=1,actions=2
+ ovs-ofctl -O OpenFlow14 add-flow br0 table=1,in_port=2,actions=2
+ ovs-ofctl -O OpenFlow14 add-flow br0 table=1,in_port=3,actions=2
+ ovs-ofctl -O OpenFlow14 add-flow br0 table=1,in_port=4,actions=2
+ ovs-ofctl -O OpenFlow14 add-flow br0 table=1,in_port=5,actions=2
+ ovs-ofctl -O OpenFlow14 add-flow br0 table=1,in_port=6,actions=2
+ ovs-ofctl -O OpenFlow14 add-flow br0 table=1,in_port=7,actions=2
+ ovs-ofctl -O OpenFlow14 add-flow br0 table=1,in_port=8,actions=2
+ ovs-ofctl -O OpenFlow14 add-flow br0 table=1,in_port=9,actions=2
+ ovs-ofctl -O OpenFlow14 add-flow br0 table=1,in_port=10,actions=2
+ echo >>expout "OFPT_TABLE_STATUS (OF1.4): reason=VACANCY_DOWN
+table_desc:-
+ table 1:
+ eviction=off eviction_flags=OTHER|IMPORTANCE|LIFETIME
+ vacancy=on vacancy_down=20% vacancy_up=80% vacancy=10%"
+ # Then delete flows until we're empty. Sending the
+ # VACANCY_DOWN message enabled VACANCY_UP events, so we get a
+ # single such message when vacancy rises above 80%.
+ ovs-ofctl -O OpenFlow14 del-flows br0 table=1,in_port=1
+ ovs-ofctl -O OpenFlow14 del-flows br0 table=1,in_port=2
+ ovs-ofctl -O OpenFlow14 del-flows br0 table=1,in_port=3
+ ovs-ofctl -O OpenFlow14 del-flows br0 table=1,in_port=4
+ ovs-ofctl -O OpenFlow14 del-flows br0 table=1,in_port=5
+ ovs-ofctl -O OpenFlow14 del-flows br0 table=1,in_port=6
+ ovs-ofctl -O OpenFlow14 del-flows br0 table=1,in_port=7
+ ovs-ofctl -O OpenFlow14 del-flows br0 table=1,in_port=8
+ ovs-ofctl -O OpenFlow14 del-flows br0 table=1,in_port=9
+ ovs-ofctl -O OpenFlow14 del-flows br0 table=1,in_port=10
+ echo >>expout "OFPT_TABLE_STATUS (OF1.4): reason=VACANCY_UP
+table_desc:-
+ table 1:
+ eviction=off eviction_flags=OTHER|IMPORTANCE|LIFETIME
+ vacancy=on vacancy_down=20% vacancy_up=80% vacancy=90%"
+
+ # Now approach vacancy from the other direction. First
+ # disable vacancy events. With initial vacancy of 70%, so
+ # that vacancy < vacancy_up, this enables VACANCY_UP events.
+ # That means that filling up the table generates no message,
+ # but deleting all the flows generates VACANCY_UP at the point
+ # vacancy rises above 80%.
+ ovs-ofctl -O OpenFlow14 mod-table br0 1 novacancy
+ ovs-ofctl -O OpenFlow14 add-flow br0 table=1,in_port=1,actions=2
+ ovs-ofctl -O OpenFlow14 add-flow br0 table=1,in_port=2,actions=2
+ ovs-ofctl -O OpenFlow14 add-flow br0 table=1,in_port=3,actions=2
+ ovs-ofctl -O OpenFlow14 mod-table br0 1 vacancy:20,80
+ ovs-ofctl -O OpenFlow14 add-flow br0 table=1,in_port=4,actions=2
+ ovs-ofctl -O OpenFlow14 add-flow br0 table=1,in_port=5,actions=2
+ ovs-ofctl -O OpenFlow14 add-flow br0 table=1,in_port=6,actions=2
+ ovs-ofctl -O OpenFlow14 add-flow br0 table=1,in_port=7,actions=2
+ ovs-ofctl -O OpenFlow14 add-flow br0 table=1,in_port=8,actions=2
+ ovs-ofctl -O OpenFlow14 add-flow br0 table=1,in_port=9,actions=2
+ ovs-ofctl -O OpenFlow14 add-flow br0 table=1,in_port=10,actions=2
+ ovs-ofctl -O OpenFlow14 del-flows br0 table=1,in_port=1
+ ovs-ofctl -O OpenFlow14 del-flows br0 table=1,in_port=2
+ ovs-ofctl -O OpenFlow14 del-flows br0 table=1,in_port=3
+ ovs-ofctl -O OpenFlow14 del-flows br0 table=1,in_port=4
+ ovs-ofctl -O OpenFlow14 del-flows br0 table=1,in_port=5
+ ovs-ofctl -O OpenFlow14 del-flows br0 table=1,in_port=6
+ ovs-ofctl -O OpenFlow14 del-flows br0 table=1,in_port=7
+ ovs-ofctl -O OpenFlow14 del-flows br0 table=1,in_port=8
+ ovs-ofctl -O OpenFlow14 del-flows br0 table=1,in_port=9
+ ovs-ofctl -O OpenFlow14 del-flows br0 table=1,in_port=10
+ echo >>expout "OFPT_TABLE_STATUS (OF1.4): reason=VACANCY_UP
+table_desc:-
+ table 1:
+ eviction=off eviction_flags=OTHER|IMPORTANCE|LIFETIME
+ vacancy=on vacancy_down=20% vacancy_up=80% vacancy=90%"
+ fi
+
+ AT_FAIL_IF([test X"$1" != X])
+
+ ovs-appctl -t ovs-ofctl ofctl/barrier
+ echo >>expout "OFPT_BARRIER_REPLY (OF1.4):"
+
+ AT_CHECK(
+ [[sed '
+s/ (xid=0x[0-9a-fA-F]*)//
+s/ *duration.*//
+s/00:0.$/00:0x/' < monitor.log]],
+ [0], [expout])
+}
+
+# It's a service connection so initially there should be no async messages.
+check_async 1
+
+# Set miss_send_len to 128, turning on packet-ins for our service connection.
+ovs-appctl -t ovs-ofctl ofctl/send 0509000c0123456700000080
+check_async 2 OFPR_ACTION OFPPR_ADD OFPPR_MODIFY OFPPR_DELETE OFPRR_DELETE OFPRR_GROUP_DELETE
+
+# Become slave (OF 1.4), which should disable everything except port status.
+ovs-appctl -t ovs-ofctl ofctl/send 051800180000000200000003000000000000000000000001
+check_async 3 OFPPR_ADD OFPPR_MODIFY OFPPR_DELETE
+
+# Use OF 1.4 OFPT_SET_ASYNC to enable a patchwork of asynchronous messages.
+ovs-appctl -t ovs-ofctl ofctl/send 051c0040000000020000000800000005000100080000000200020008000000020003000800000005000400080000001c00050008000000050008000800000018
+check_async 4 OFPR_INVALID_TTL OFPPR_DELETE OFPRR_DELETE OFPRR_GROUP_DELETE OFPTR_VACANCY_UP
+
+# Set controller ID 123.
+ovs-appctl -t ovs-ofctl ofctl/send 05040018000000030000232000000014000000000000007b
+check_async 5 OFPR_NO_MATCH OFPPR_DELETE OFPRR_DELETE OFPRR_GROUP_DELETE
+
+# Restore controller ID 0.
+ovs-appctl -t ovs-ofctl ofctl/send 050400180000000300002320000000140000000000000000
+
+# Become master (OF 1.4).
+ovs-appctl -t ovs-ofctl ofctl/send 051800180000000400000002000000000000000000000002
+check_async 6 OFPR_ACTION OFPPR_ADD OFPPR_MODIFY OFPRR_DELETE
+
+ovs-appctl -t ovs-ofctl exit
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - asynchronous message control (OpenFlow 1.5)])
+OVS_VSWITCHD_START
+AT_CHECK([ovs-ofctl -O OpenFlow15 -P standard monitor br0 --detach --no-chdir --pidfile])
+check_async () {
+ printf '\n\n--- check_async %d ---\n\n\n' $1
+ INDEX=$1
+ shift
+
+ ovs-appctl -t ovs-ofctl ofctl/barrier
+ ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
+ : > expout
+
+ # Other tests are not working with OF 1.5, and message
+ # format may change, so leave them out.
+
+ # OFPT_PORT_STATUS, OFPPR_ADD
+ ovs-vsctl add-port br0 test -- set Interface test type=dummy
+ if test X"$1" = X"OFPPR_ADD"; then shift;
+ echo >>expout "OFPT_PORT_STATUS (OF1.5): ADD: ${INDEX}(test): addr:aa:55:aa:55:00:0x
+ config: PORT_DOWN
+ state: LINK_DOWN
+ speed: 0 Mbps now, 0 Mbps max"
+ fi
+
+ # OFPT_PORT_STATUS, OFPPR_MODIFY
+ ovs-ofctl -O OpenFlow15 -vwarn mod-port br0 test up
+ if test X"$1" = X"OFPPR_MODIFY"; then shift;
+ echo >>expout "OFPT_PORT_STATUS (OF1.5): MOD: ${INDEX}(test): addr:aa:55:aa:55:00:0x
+ config: 0
+ state: LINK_DOWN
+ speed: 0 Mbps now, 0 Mbps max
+OFPT_PORT_STATUS (OF1.5): MOD: 2(test): addr:aa:55:aa:55:00:0x
+ config: 0
+ state: 0
+ speed: 0 Mbps now, 0 Mbps max"
+ fi
+
+ # OFPT_PORT_STATUS, OFPPR_DELETE
+ ovs-vsctl del-port br0 test
+ if test X"$1" = X"OFPPR_DELETE"; then shift;
+ echo >>expout "OFPT_PORT_STATUS (OF1.5): DEL: ${INDEX}(test): addr:aa:55:aa:55:00:0x
+ config: 0
+ state: 0
+ speed: 0 Mbps now, 0 Mbps max"
+ fi
+
+ AT_FAIL_IF([test X"$1" != X])
+
+ ovs-appctl -t ovs-ofctl ofctl/barrier
+ echo >>expout "OFPT_BARRIER_REPLY (OF1.5):"
+
+ AT_CHECK(
+ [[sed '
+s/ (xid=0x[0-9a-fA-F]*)//
+s/ *duration.*//
+s/00:0.$/00:0x/' < monitor.log]],
+ [0], [expout])
+}
+
+# It's a service connection so initially there should be no async messages.
+check_async 1
+
+# If we don't set this, async messages are not received.
+# Set miss_send_len to 128, turning on packet-ins for our service connection.
+ovs-appctl -t ovs-ofctl ofctl/send 0609000c0123456700000080
+check_async 2 OFPPR_ADD OFPPR_MODIFY OFPPR_DELETE
+
+# Set-async has changed in OF 1.4 and is not yet implemented.
+
+ovs-appctl -t ovs-ofctl exit
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
dnl This test checks that the role request/response messaging works
dnl and that generation_id is handled properly.
AT_SETUP([ofproto - controller role (OpenFlow 1.2)])
OVS_VSWITCHD_START
-AT_CHECK([ovs-ofctl -O OpenFlow12 monitor br0 --detach --no-chdir --pidfile])
+on_exit 'kill `cat c1.pid c2.pid`'
+
+# Start two ovs-ofctl controller processes.
+AT_CAPTURE_FILE([monitor1.log])
+AT_CAPTURE_FILE([expout1])
+AT_CAPTURE_FILE([experr1])
+AT_CAPTURE_FILE([monitor2.log])
+AT_CAPTURE_FILE([expout2])
+AT_CAPTURE_FILE([experr2])
+for i in 1 2; do
+ AT_CHECK([ovs-ofctl -O OpenFlow12 monitor br0 --detach --no-chdir --pidfile=`pwd`/c$i.pid --unixctl=`pwd`/c$i])
+ ovs-appctl -t `pwd`/c$i ofctl/barrier
+ ovs-appctl -t `pwd`/c$i ofctl/set-output-file monitor$i.log
+ : > expout$i
+ : > experr$i
+
+ # find out current role
+ ovs-appctl -t `pwd`/c$i ofctl/send 031800180000000200000000000000000000000000000000
+ echo >>experr$i "send: OFPT_ROLE_REQUEST (OF1.2): role=nochange"
+ echo >>expout$i "OFPT_ROLE_REPLY (OF1.2): role=equal"
+done
-ovs-appctl -t ovs-ofctl ofctl/barrier
-ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
-: > expout
-: > experr
+# controller 1: Become slave (generation_id is initially undefined, so
+# 2^63+2 should not be stale)
+ovs-appctl -t `pwd`/c1 ofctl/send 031800180000000300000003000000008000000000000002
+echo >>experr1 "send: OFPT_ROLE_REQUEST (OF1.2): role=slave generation_id=9223372036854775810"
+echo >>expout1 "OFPT_ROLE_REPLY (OF1.2): role=slave generation_id=9223372036854775810"
+
+# controller 2: Become master.
+ovs-appctl -t `pwd`/c2 ofctl/send 031800180000000300000002000000008000000000000003
+echo >>experr2 "send: OFPT_ROLE_REQUEST (OF1.2): role=master generation_id=9223372036854775811"
+echo >>expout2 "OFPT_ROLE_REPLY (OF1.2): role=master generation_id=9223372036854775811"
+
+# controller 1: Try to become the master using a stale generation ID
+ovs-appctl -t `pwd`/c1 ofctl/send 031800180000000400000002000000000000000000000003
+echo >>experr1 "send: OFPT_ROLE_REQUEST (OF1.2): role=master generation_id=3"
+echo >>expout1 "OFPT_ERROR (OF1.2): OFPRRFC_STALE"
+echo >>expout1 "OFPT_ROLE_REQUEST (OF1.2): role=master generation_id=3"
+
+# controller 1: Become master using a valid generation ID
+ovs-appctl -t `pwd`/c1 ofctl/send 031800180000000500000002000000000000000000000001
+echo >>experr1 "send: OFPT_ROLE_REQUEST (OF1.2): role=master generation_id=1"
+echo >>expout1 "OFPT_ROLE_REPLY (OF1.2): role=master generation_id=1"
+
+for i in 1 2; do
+ ovs-appctl -t `pwd`/c$i ofctl/barrier
+ echo >>expout$i "OFPT_BARRIER_REPLY (OF1.2):"
+done
-# find out current role
-ovs-appctl -t ovs-ofctl ofctl/send 031800180000000200000000000000000000000000000000
-echo >>experr "send: OFPT_ROLE_REQUEST (OF1.2) (xid=0x2): role=nochange"
-echo >>expout "OFPT_ROLE_REPLY (OF1.2) (xid=0x2): role=equal"
+# Check output.
+for i in 1 2; do
+ cp expout$i expout
+ AT_CHECK([grep -v '^send:' monitor$i.log | strip_xids], [0], [expout])
+ cp experr$i expout
+ AT_CHECK([grep '^send:' monitor$i.log | strip_xids], [0], [expout])
+done
+OVS_VSWITCHD_STOP
+AT_CLEANUP
-# Become slave (generation_id is initially undefined, so 2^63+2 should not be stale)
-ovs-appctl -t ovs-ofctl ofctl/send 031800180000000300000003000000008000000000000002
-echo >>experr "send: OFPT_ROLE_REQUEST (OF1.2) (xid=0x3): role=slave generation_id=9223372036854775810"
-echo >>expout "OFPT_ROLE_REPLY (OF1.2) (xid=0x3): role=slave generation_id=9223372036854775810"
+dnl This test checks that the role request/response messaging works,
+dnl that generation_id is handled properly, and that role status update
+dnl messages are sent when a controller's role gets changed from master
+dnl to slave.
+AT_SETUP([ofproto - controller role (OpenFlow 1.4)])
+OVS_VSWITCHD_START
+on_exit 'kill `cat c1.pid c2.pid`'
+
+# Start two ovs-ofctl controller processes.
+AT_CAPTURE_FILE([monitor1.log])
+AT_CAPTURE_FILE([expout1])
+AT_CAPTURE_FILE([experr1])
+AT_CAPTURE_FILE([monitor2.log])
+AT_CAPTURE_FILE([expout2])
+AT_CAPTURE_FILE([experr2])
+for i in 1 2; do
+ AT_CHECK([ovs-ofctl -O OpenFlow14 monitor br0 --detach --no-chdir --pidfile=`pwd`/c$i.pid --unixctl=`pwd`/c$i])
+ ovs-appctl -t `pwd`/c$i ofctl/barrier
+ ovs-appctl -t `pwd`/c$i ofctl/set-output-file monitor$i.log
+ : > expout$i
+ : > experr$i
+
+ # find out current role
+ ovs-appctl -t `pwd`/c$i ofctl/send 051800180000000200000000000000000000000000000000
+ echo >>experr$i "send: OFPT_ROLE_REQUEST (OF1.4): role=nochange"
+ echo >>expout$i "OFPT_ROLE_REPLY (OF1.4): role=equal"
+done
-# Try to become the master using a stale generation ID
-ovs-appctl -t ovs-ofctl ofctl/send 031800180000000400000002000000000000000000000002
-echo >>experr "send: OFPT_ROLE_REQUEST (OF1.2) (xid=0x4): role=master generation_id=2"
-echo >>expout "OFPT_ERROR (OF1.2) (xid=0x4): OFPRRFC_STALE"
-echo >>expout "OFPT_ROLE_REQUEST (OF1.2) (xid=0x4): role=master generation_id=2"
-
-# Become master using a valid generation ID
-ovs-appctl -t ovs-ofctl ofctl/send 031800180000000500000002000000000000000000000001
-echo >>experr "send: OFPT_ROLE_REQUEST (OF1.2) (xid=0x5): role=master generation_id=1"
-echo >>expout "OFPT_ROLE_REPLY (OF1.2) (xid=0x5): role=master generation_id=1"
-ovs-appctl -t ovs-ofctl ofctl/barrier
-echo >>expout "OFPT_BARRIER_REPLY (OF1.2) (xid=0x3):"
+# controller 1: Become slave (generation_id is initially undefined, so
+# 2^63+2 should not be stale)
+ovs-appctl -t `pwd`/c1 ofctl/send 051800180000000300000003000000008000000000000002
+echo >>experr1 "send: OFPT_ROLE_REQUEST (OF1.4): role=slave generation_id=9223372036854775810"
+echo >>expout1 "OFPT_ROLE_REPLY (OF1.4): role=slave generation_id=9223372036854775810"
+
+# controller 2: Become master.
+ovs-appctl -t `pwd`/c2 ofctl/send 051800180000000300000002000000008000000000000003
+echo >>experr2 "send: OFPT_ROLE_REQUEST (OF1.4): role=master generation_id=9223372036854775811"
+echo >>expout2 "OFPT_ROLE_REPLY (OF1.4): role=master generation_id=9223372036854775811"
+
+# controller 1: Try to become the master using a stale generation ID
+ovs-appctl -t `pwd`/c1 ofctl/send 051800180000000400000002000000000000000000000003
+echo >>experr1 "send: OFPT_ROLE_REQUEST (OF1.4): role=master generation_id=3"
+echo >>expout1 "OFPT_ERROR (OF1.4): OFPRRFC_STALE"
+echo >>expout1 "OFPT_ROLE_REQUEST (OF1.4): role=master generation_id=3"
+
+# controller 1: Become master using a valid generation ID
+ovs-appctl -t `pwd`/c1 ofctl/send 051800180000000500000002000000000000000000000001
+echo >>experr1 "send: OFPT_ROLE_REQUEST (OF1.4): role=master generation_id=1"
+echo >>expout1 "OFPT_ROLE_REPLY (OF1.4): role=master generation_id=1"
+echo >>expout2 "OFPT_ROLE_STATUS (OF1.4): role=slave generation_id=1 reason=master_request"
+
+for i in 1 2; do
+ ovs-appctl -t `pwd`/c$i ofctl/barrier
+ echo >>expout$i "OFPT_BARRIER_REPLY (OF1.4):"
+done
-AT_CHECK([grep -v '^send:' monitor.log], [0], [expout])
-mv experr expout
-AT_CHECK([grep '^send:' monitor.log], [0], [expout])
+# Check output.
+for i in 1 2; do
+ cp expout$i expout
+ AT_CHECK([grep -v '^send:' monitor$i.log | strip_xids], [0], [expout])
+ cp experr$i expout
+ AT_CHECK([grep '^send:' monitor$i.log | strip_xids], [0], [expout])
+done
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+dnl This test checks the Group and meter notifications when a group mod
+dnl command is sent from one controller and the reply is received by
+dnl other controllers.
+AT_SETUP([ofproto - requestforward (OpenFlow 1.4)])
+OVS_VSWITCHD_START
+on_exit 'kill `cat c1.pid c2.pid c3.pid`'
+
+# Start two ovs-ofctl controller processes.
+AT_CAPTURE_FILE([monitor1.log])
+AT_CAPTURE_FILE([expout1])
+AT_CAPTURE_FILE([monitor2.log])
+AT_CAPTURE_FILE([expout2])
+AT_CAPTURE_FILE([monitor3.log])
+AT_CAPTURE_FILE([expout3])
+
+ovs-ofctl -O OpenFlow15 monitor br0 --detach --no-chdir --pidfile=`pwd`/c1.pid --unixctl=`pwd`/c1
+ovs-ofctl -O OpenFlow14 monitor br0 --detach --no-chdir --pidfile=`pwd`/c2.pid --unixctl=`pwd`/c2
+ovs-ofctl -O OpenFlow14 monitor br0 --detach --no-chdir --pidfile=`pwd`/c3.pid --unixctl=`pwd`/c3
+
+check_async () {
+ for i in 1 3; do
+ ovs-appctl -t `pwd`/c$i ofctl/barrier
+ ovs-appctl -t `pwd`/c$i ofctl/set-output-file monitor$i.log
+ : > expout$i
+ done
+
+ printf '\n\n--- check_async %d ---\n\n\n' $1
+ INDEX=$1
+ shift
+
+ # OFPGC_ADD
+ ovs-appctl -t `pwd`/c2 ofctl/send "050f0020000000020000000000000001 00100000 ffffffffffffffff 00000000"
+ if test X"$1" = X"OFPGC_ADD"; then shift;
+ echo >>expout2 "send: OFPT_GROUP_MOD (OF1.4):
+ ADD group_id=1,type=all,bucket=actions=drop"
+ echo >>expout1 "OFPT_REQUESTFORWARD (OF1.5): reason=group_mod
+ ADD group_id=1,type=all,bucket=bucket_id:0,actions=drop"
+ echo >>expout3 "OFPT_REQUESTFORWARD (OF1.4): reason=group_mod
+ ADD group_id=1,type=all,bucket=actions=drop"
+ fi
+
+ # OFPGC_MODIFY
+ ovs-appctl -t `pwd`/c2 ofctl/send "050f0020000000020001010000000001 00100000 ffffffffffffffff 00000000"
+ if test X"$1" = X"OFPGC_MODIFY"; then shift;
+ echo >>expout2 "send: OFPT_GROUP_MOD (OF1.4):
+ MOD group_id=1,type=select,bucket=weight:0,actions=drop"
+ echo >>expout1 "OFPT_REQUESTFORWARD (OF1.5): reason=group_mod
+ MOD group_id=1,type=select,bucket=bucket_id:0,weight:0,actions=drop"
+ echo >>expout3 "OFPT_REQUESTFORWARD (OF1.4): reason=group_mod
+ MOD group_id=1,type=select,bucket=weight:0,actions=drop"
+ fi
+
+ ovs-appctl -t `pwd`/c1 ofctl/barrier
+ echo >>expout1 "OFPT_BARRIER_REPLY (OF1.5):"
+ ovs-appctl -t `pwd`/c2 ofctl/barrier
+ echo >>expout2 "OFPT_BARRIER_REPLY (OF1.4):"
+ ovs-appctl -t `pwd`/c3 ofctl/barrier
+ echo >>expout3 "OFPT_BARRIER_REPLY (OF1.4):"
+
+ # Check output.
+ for i in 1 3; do
+ cp expout$i expout
+ AT_CHECK(
+ [[sed '
+s/ (xid=0x[0-9a-fA-F]*)//'< monitor$i.log]],
+ [0], [expout])
+ done
+}
+
+# controller 1: Become slave
+ovs-appctl -t `pwd`/c1 ofctl/send 061800180000000300000003000000008000000000000002
+
+# controller 2: Become master
+ovs-appctl -t `pwd`/c2 ofctl/send 051800180000000300000002000000008000000000000003
+
+# controller 1: Become slave
+ovs-appctl -t `pwd`/c3 ofctl/send 051800180000000300000003000000008000000000000004
+
+# controller 1: Enabled requestforward using set Asynchronous message
+ovs-appctl -t `pwd`/c1 ofctl/send 061c00280000000200000008000000050002000800000002000400080000001a000a000800000003
+
+# controller 2: Enabled requestforward using set Asynchronous message
+ovs-appctl -t `pwd`/c2 ofctl/send 051c002800000002000100080000000200030008000000050005000800000005000b000800000003
+
+# controller 1: Enabled requestforward using set Asynchronous message
+ovs-appctl -t `pwd`/c3 ofctl/send 051c00280000000200000008000000050002000800000002000400080000001a000a000800000003
+check_async 1 OFPGC_ADD OFPGC_MODIFY
-ovs-appctl -t ovs-ofctl exit
OVS_VSWITCHD_STOP
AT_CLEANUP
dnl by the controller.
AT_SETUP([ofproto - packet-out from controller (OpenFlow 1.0)])
OVS_VSWITCHD_START
-ADD_OF_PORTS([br0], [1])
+add_of_ports br0 1
# Start a monitor listening for packet-ins.
-AT_CHECK([ovs-ofctl -P openflow10 monitor br0 --detach --no-chdir --pidfile])
+AT_CHECK([ovs-ofctl -P standard monitor br0 --detach --no-chdir --pidfile])
ovs-appctl -t ovs-ofctl ofctl/send 0109000c0123456700000080
ovs-appctl -t ovs-ofctl ofctl/barrier
ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
AT_CHECK([sed 's/ (xid=0x[[0-9a-fA-F]]*)//' monitor.log], [0], [dnl
OFPT_PACKET_IN: total_len=14 in_port=ANY (via action) data_len=14 (unbuffered)
-metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234
+vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234
OFPT_PACKET_IN: total_len=14 in_port=CONTROLLER (via action) data_len=14 (unbuffered)
-metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x5678
+vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x5678
OFPT_BARRIER_REPLY:
])
OVS_VSWITCHD_START
# Start a monitor listening for packet-ins.
-AT_CHECK([ovs-ofctl -O OpenFlow12 monitor br0 --detach --no-chdir --pidfile])
+AT_CHECK([ovs-ofctl -O OpenFlow12 -P standard monitor br0 --detach --no-chdir --pidfile])
ovs-appctl -t ovs-ofctl ofctl/send 0309000c0123456700000080
ovs-appctl -t ovs-ofctl ofctl/barrier
ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
AT_CHECK([sed 's/ (xid=0x[[0-9a-fA-F]]*)//' monitor.log], [0], [dnl
OFPT_PACKET_IN (OF1.2): total_len=14 in_port=ANY (via action) data_len=14 (unbuffered)
-metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234
+vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234
OFPT_PACKET_IN (OF1.2): total_len=14 in_port=CONTROLLER (via action) data_len=14 (unbuffered)
-metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x5678
+vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x5678
OFPT_BARRIER_REPLY (OF1.2):
])
OVS_VSWITCHD_START
# Start a monitor listening for packet-ins.
-AT_CHECK([ovs-ofctl -O OpenFlow11 monitor br0 --detach --no-chdir --pidfile])
+AT_CHECK([ovs-ofctl -O OpenFlow11 -P standard monitor br0 --detach --no-chdir --pidfile])
ovs-appctl -t ovs-ofctl ofctl/send 0209000c0123456700000080
ovs-appctl -t ovs-ofctl ofctl/barrier
ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
AT_CHECK([sed 's/ (xid=0x[[0-9a-fA-F]]*)//' monitor.log], [0], [dnl
OFPT_PACKET_IN (OF1.1): total_len=14 in_port=ANY (via action) data_len=14 (unbuffered)
-metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234
+vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234
OFPT_PACKET_IN (OF1.1): total_len=14 in_port=CONTROLLER (via action) data_len=14 (unbuffered)
-metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x5678
+vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x5678
OFPT_BARRIER_REPLY (OF1.1):
])
OVS_VSWITCHD_STOP
AT_CLEANUP
+dnl This test checks that metadata and userdata are encoded in NXT_PACKET_IN2.
+AT_SETUP([ofproto - packet-out with metadata and userdata (NXT_PACKET_IN2)])
+OVS_VSWITCHD_START
+
+# Start a monitor listening for packet-ins.
+AT_CHECK([ovs-ofctl -P nxt_packet_in2 monitor br0 --detach --no-chdir --pidfile])
+ovs-appctl -t ovs-ofctl ofctl/send 0109000c0123456700000080
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
+AT_CAPTURE_FILE([monitor.log])
+
+# Send a packet-out with a load action to set some metadata, and forward to controller
+AT_CHECK([ovs-ofctl packet-out br0 controller 'load(0xfafafafa5a5a5a5a->OXM_OF_METADATA[[0..63]]), load(0xaa->NXM_NX_PKT_MARK[[]]), controller(userdata=01.02.03.04.05)' '0001020304050010203040501234'])
+
+# Stop the monitor and check its output.
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl exit
+
+AT_CHECK([sed 's/ (xid=0x[[0-9a-fA-F]]*)//' monitor.log], [0], [dnl
+NXT_PACKET_IN2: total_len=14 pkt_mark=0xaa,metadata=0xfafafafa5a5a5a5a,in_port=CONTROLLER (via action) data_len=14 (unbuffered)
+ userdata=01.02.03.04.05
+vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234
+OFPT_BARRIER_REPLY:
+])
+
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
dnl This test checks that metadata is encoded in packet_in structures,
dnl supported by NXAST.
AT_SETUP([ofproto - packet-out with metadata (NXM)])
OVS_VSWITCHD_START
# Start a monitor listening for packet-ins.
-AT_CHECK([ovs-ofctl -P nxm monitor br0 --detach --no-chdir --pidfile])
+AT_CHECK([ovs-ofctl -P nxt_packet_in monitor br0 --detach --no-chdir --pidfile])
ovs-appctl -t ovs-ofctl ofctl/send 0109000c0123456700000080
ovs-appctl -t ovs-ofctl ofctl/barrier
ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
ovs-appctl -t ovs-ofctl exit
AT_CHECK([sed 's/ (xid=0x[[0-9a-fA-F]]*)//' monitor.log], [0], [dnl
-NXT_PACKET_IN: total_len=14 in_port=CONTROLLER metadata=0xfafafafa5a5a5a5a pkt_mark=0xaa (via action) data_len=14 (unbuffered)
-metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234
+NXT_PACKET_IN: total_len=14 pkt_mark=0xaa,metadata=0xfafafafa5a5a5a5a,in_port=CONTROLLER (via action) data_len=14 (unbuffered)
+vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234
OFPT_BARRIER_REPLY:
])
OVS_VSWITCHD_START
# Start a monitor listening for packet-ins.
-AT_CHECK([ovs-ofctl -O OpenFlow12 monitor br0 --detach --no-chdir --pidfile])
+AT_CHECK([ovs-ofctl -O OpenFlow12 -P standard monitor br0 --detach --no-chdir --pidfile])
ovs-appctl -t ovs-ofctl ofctl/send 0309000c0123456700000080
ovs-appctl -t ovs-ofctl ofctl/barrier
ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
AT_CAPTURE_FILE([monitor.log])
-# Send a packet-out with a load action to set some metadata, and forward to controller
-AT_CHECK([ovs-ofctl -O OpenFlow12 packet-out br0 none 'load(0xfafafafa5a5a5a5a->OXM_OF_METADATA[[0..63]]), controller' '0001020304050010203040501234'])
+# Send a packet-out with a set-field action to set some metadata, and forward to controller
+AT_CHECK([ovs-ofctl -O OpenFlow12 packet-out br0 none 'set_field:0xfafafafa5a5a5a5a->metadata, controller' '0001020304050010203040501234'])
# Stop the monitor and check its output.
ovs-appctl -t ovs-ofctl ofctl/barrier
ovs-appctl -t ovs-ofctl exit
AT_CHECK([sed 's/ (xid=0x[[0-9a-fA-F]]*)//' monitor.log], [0], [dnl
-OFPT_PACKET_IN (OF1.2): total_len=14 in_port=ANY metadata=0xfafafafa5a5a5a5a (via action) data_len=14 (unbuffered)
-metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234
+OFPT_PACKET_IN (OF1.2): total_len=14 metadata=0xfafafafa5a5a5a5a,in_port=ANY (via action) data_len=14 (unbuffered)
+vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234
OFPT_BARRIER_REPLY (OF1.2):
])
OVS_VSWITCHD_STOP
AT_CLEANUP
+dnl This test checks that metadata is encoded in packet_in structures,
+dnl supported by NXAST.
+AT_SETUP([ofproto - packet-out with metadata and dual set_field (OpenFlow 1.3)])
+OVS_VSWITCHD_START
+
+# Start a monitor listening for packet-ins.
+AT_CHECK([ovs-ofctl -O OpenFlow13 -P standard monitor br0 --detach --no-chdir --pidfile])
+ovs-appctl -t ovs-ofctl ofctl/send 0409000c0123456700000080
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
+AT_CAPTURE_FILE([monitor.log])
+
+# Send a packet-out with a couple of set-field action to set some metadata, and forward to controller
+AT_CHECK([ovs-ofctl -O OpenFlow13 packet-out br0 none 'set_field:0xfafafafa5a5a5a5a->metadata, set_field:0x6b->metadata, controller' '0001020304050010203040501234'])
+
+# Stop the monitor and check its output.
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl exit
+
+AT_CHECK([sed 's/ (xid=0x[[0-9a-fA-F]]*)//' monitor.log], [0], [dnl
+OFPT_PACKET_IN (OF1.3): total_len=14 metadata=0x6b,in_port=ANY (via action) data_len=14 (unbuffered)
+vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234
+OFPT_BARRIER_REPLY (OF1.3):
+])
+
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
dnl This test checks that tunnel metadata is encoded in packet_in structures.
AT_SETUP([ofproto - packet-out with tunnel metadata (OpenFlow 1.2)])
OVS_VSWITCHD_START
# Start a monitor listening for packet-ins.
-AT_CHECK([ovs-ofctl -O OpenFlow12 monitor br0 --detach --no-chdir --pidfile])
+AT_CHECK([ovs-ofctl -O OpenFlow12 -P standard monitor br0 --detach --no-chdir --pidfile])
ovs-appctl -t ovs-ofctl ofctl/send 0309000c0123456700000080
ovs-appctl -t ovs-ofctl ofctl/barrier
ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
ovs-appctl -t ovs-ofctl exit
AT_CHECK([sed 's/ (xid=0x[[0-9a-fA-F]]*)//' monitor.log], [0], [dnl
-OFPT_PACKET_IN (OF1.2): total_len=14 in_port=ANY tun_id=0x1020304 tun_src=127.0.0.1 tun_dst=192.168.0.1 (via action) data_len=14 (unbuffered)
-metadata=0,in_port=0,vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234
+OFPT_PACKET_IN (OF1.2): total_len=14 tun_id=0x1020304,tun_src=127.0.0.1,tun_dst=192.168.0.1,in_port=ANY (via action) data_len=14 (unbuffered)
+vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234
OFPT_BARRIER_REPLY (OF1.2):
])
OVS_VSWITCHD_STOP
AT_CLEANUP
+m4_divert_push([PREPARE_TESTS])
+# Sorts groups of lines that start with a space, without moving them
+# past the nearest line that does not start with a space.
+multiline_sort () {
+ ${PERL} -e '
+ use warnings;
+ use strict;
+ my @buffer = ();
+ while (<STDIN>) {
+ if (/^ /) {
+ push(@buffer, $_);
+ } else {
+ print $_ foreach sort(@buffer);
+ print $_;
+ @buffer = ();
+ }
+ }
+ print $_ foreach sort(@buffer);
+'
+}
+m4_divert_pop([PREPARE_TESTS])
+
AT_SETUP([ofproto - flow monitoring])
AT_KEYWORDS([monitor])
OVS_VSWITCHD_START
ovs-ofctl add-flow br0 in_port=0,dl_vlan_pcp=0,actions=output:21
ovs-ofctl add-flow br0 in_port=0,dl_vlan_pcp=1,actions=output:22
ovs-ofctl add-flow br0 in_port=0,actions=output:23
+ovs-ofctl mod-flows br0 dl_vlan=123,actions=output:3
ovs-ofctl mod-flows br0 cookie=5,dl_vlan=123,actions=output:3
ovs-ofctl del-flows br0 dl_vlan=123
ovs-ofctl del-flows br0
ovs-appctl -t ovs-ofctl ofctl/barrier
-sort='
- # Sorts groups of lines that start with a space, without moving them
- # past the nearest line that does not start with a space.
- use warnings;
- use strict;
- my @buffer = ();
- while (<STDIN>) {
- if (/^ /) {
- push(@buffer, $_);
- } else {
- print $_ foreach sort(@buffer);
- print $_;
- @buffer = ();
- }
- }
- print $_ foreach sort(@buffer);
-'
-AT_CHECK([sed 's/ (xid=0x[[1-9a-fA-F]][[0-9a-fA-F]]*)//' monitor.log | ${PERL} -e "$sort"], [0],
+AT_CHECK([sed 's/ (xid=0x[[1-9a-fA-F]][[0-9a-fA-F]]*)//' monitor.log | multiline_sort], [0],
[NXST_FLOW_MONITOR reply (xid=0x0):
event=ADDED table=0 cookie=0 in_port=0,dl_vlan=124 actions=output:2
NXST_FLOW_MONITOR reply (xid=0x0):
event=ADDED table=0 cookie=0 in_port=0,dl_vlan_pcp=1 actions=output:22
NXST_FLOW_MONITOR reply (xid=0x0):
event=ADDED table=0 cookie=0 in_port=0 actions=output:23
+NXST_FLOW_MONITOR reply (xid=0x0):
+ event=MODIFIED table=0 cookie=0 in_port=0,dl_vlan=123 actions=output:3
+ event=MODIFIED table=0 cookie=0 in_port=0,dl_vlan=123,dl_vlan_pcp=0 actions=output:3
+ event=MODIFIED table=0 cookie=0 in_port=0,dl_vlan=123,dl_vlan_pcp=1 actions=output:3
NXST_FLOW_MONITOR reply (xid=0x0):
event=MODIFIED table=0 cookie=0x5 in_port=0,dl_vlan=123 actions=output:3
event=MODIFIED table=0 cookie=0x5 in_port=0,dl_vlan=123,dl_vlan_pcp=0 actions=output:3
OFPT_BARRIER_REPLY:
])
+# Check that our own changes are reported as full updates.
+ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
+ovs-ofctl add-flow br0 in_port=1,actions=output:2
+ovs-ofctl add-flow br0 in_port=2,actions=output:1
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-appctl -t ovs-ofctl ofctl/send 010e004812345678003fffff00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000003000000000000ffffffffffff0000
+ovs-appctl -t ovs-ofctl ofctl/barrier
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip], [0], [NXST_FLOW reply:
+])
+AT_CHECK([sed 's/ (xid=0x[[1-9a-fA-F]][[0-9a-fA-F]]*)//' monitor.log | multiline_sort], [0],
+[NXST_FLOW_MONITOR reply (xid=0x0):
+ event=ADDED table=0 cookie=0 in_port=1 actions=output:2
+NXST_FLOW_MONITOR reply (xid=0x0):
+ event=ADDED table=0 cookie=0 in_port=2 actions=output:1
+OFPT_BARRIER_REPLY:
+send: OFPT_FLOW_MOD: DEL priority=0 actions=drop
+NXST_FLOW_MONITOR reply (xid=0x0):
+ event=DELETED reason=delete table=0 cookie=0 in_port=1 actions=output:2
+ event=DELETED reason=delete table=0 cookie=0 in_port=2 actions=output:1
+OFPT_BARRIER_REPLY:
+])
+
+ovs-appctl -t ovs-ofctl exit
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto - flow monitoring with !own])
+AT_KEYWORDS([monitor])
+OVS_VSWITCHD_START
+
+ovs-ofctl add-flow br0 in_port=0,dl_vlan=123,actions=output:1
+
+# Start a monitor watching the flow table and check the initial reply.
+ovs-ofctl monitor br0 watch:\!own --detach --no-chdir --pidfile >monitor.log 2>&1
+AT_CAPTURE_FILE([monitor.log])
+ovs-appctl -t ovs-ofctl ofctl/barrier
+AT_CHECK([sed 's/ (xid=0x[[1-9a-fA-F]][[0-9a-fA-F]]*)//' monitor.log], [0],
+ [NXST_FLOW_MONITOR reply:
+ event=ADDED table=0 cookie=0 in_port=0,dl_vlan=123 actions=output:1
+OFPT_BARRIER_REPLY:
+])
+
# Check that our own changes are reported as abbreviations.
ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
ovs-ofctl add-flow br0 in_port=1,actions=output:2
OVS_VSWITCHD_STOP
AT_CLEANUP
+AT_SETUP([ofproto - flow monitoring with out_port])
+AT_KEYWORDS([monitor])
+OVS_VSWITCHD_START
+
+ovs-ofctl add-flow br0 in_port=0,dl_vlan=121,actions=output:1
+ovs-ofctl add-flow br0 in_port=0,dl_vlan=122,actions=output:1
+ovs-ofctl add-flow br0 in_port=0,dl_vlan=123,actions=output:2
+
+# Start a monitor watching the flow table and check the initial reply.
+ovs-ofctl monitor br0 watch:out_port=2 --detach --no-chdir --pidfile >monitor.log 2>&1
+AT_CAPTURE_FILE([monitor.log])
+ovs-appctl -t ovs-ofctl ofctl/barrier
+AT_CHECK([sed 's/ (xid=0x[[1-9a-fA-F]][[0-9a-fA-F]]*)//' monitor.log], [0],
+ [NXST_FLOW_MONITOR reply:
+ event=ADDED table=0 cookie=0 in_port=0,dl_vlan=123 actions=output:2
+OFPT_BARRIER_REPLY:
+])
+
+ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
+
+# Add, modify flows and check the updates.
+ovs-ofctl mod-flows br0 dl_vlan=121,actions=drop
+ovs-ofctl mod-flows br0 dl_vlan=122,actions=output:1,output:2
+ovs-appctl -t ovs-ofctl ofctl/barrier
+
+ovs-ofctl mod-flows br0 dl_vlan=123,actions=output:1,output:2
+ovs-appctl -t ovs-ofctl ofctl/barrier
+
+ovs-ofctl mod-flows br0 dl_vlan=122,actions=output:1
+ovs-appctl -t ovs-ofctl ofctl/barrier
+ovs-ofctl mod-flows br0 dl_vlan=123,actions=output:2
+ovs-appctl -t ovs-ofctl ofctl/barrier
+
+AT_CHECK([sed 's/ (xid=0x[[1-9a-fA-F]][[0-9a-fA-F]]*)//' monitor.log], [0],
+[NXST_FLOW_MONITOR reply (xid=0x0):
+ event=MODIFIED table=0 cookie=0 in_port=0,dl_vlan=122 actions=output:1,output:2
+OFPT_BARRIER_REPLY:
+NXST_FLOW_MONITOR reply (xid=0x0):
+ event=MODIFIED table=0 cookie=0 in_port=0,dl_vlan=123 actions=output:1,output:2
+OFPT_BARRIER_REPLY:
+NXST_FLOW_MONITOR reply (xid=0x0):
+ event=MODIFIED table=0 cookie=0 in_port=0,dl_vlan=122 actions=output:1
+OFPT_BARRIER_REPLY:
+NXST_FLOW_MONITOR reply (xid=0x0):
+ event=MODIFIED table=0 cookie=0 in_port=0,dl_vlan=123 actions=output:2
+OFPT_BARRIER_REPLY:
+])
+
+ovs-appctl -t ovs-ofctl exit
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
AT_SETUP([ofproto - flow monitoring pause and resume])
AT_KEYWORDS([monitor])
OVS_VSWITCHD_START
# Start a monitor watching the flow table, then make it block.
-ON_EXIT([kill `cat ovs-ofctl.pid`])
+on_exit 'kill `cat ovs-ofctl.pid`'
ovs-ofctl monitor br0 watch: --detach --no-chdir --pidfile >monitor.log 2>&1
AT_CAPTURE_FILE([monitor.log])
ovs-appctl -t ovs-ofctl ofctl/block
PACKET_IN: no_match action
PORT_STATUS: add delete modify
FLOW_REMOVED: idle hard delete
+ ROLE_STATUS: (off)
+ TABLE_STATUS: (off)
+ REQUESTFORWARD: (off)
slave:
PACKET_IN: (off)
PORT_STATUS: add delete modify
FLOW_REMOVED: (off)
+ ROLE_STATUS: (off)
+ TABLE_STATUS: (off)
+ REQUESTFORWARD: (off)
OFPT_BARRIER_REPLY (OF1.3):
])
AT_SETUP([ofproto - ofport_request])
OVS_VSWITCHD_START
-ADD_OF_PORTS([br0], [1], [2], [3])
+add_of_ports br0 1 2 3
set_and_check_specific_ofports () {
ovs-vsctl set Interface p1 ofport_request="$1" -- \
for post in '1 2 3' '1 3 2' '2 1 3' '2 3 1' '3 1 2' '3 2 1'; do
echo -----------------------------------------------------------
echo "Check changing port numbers from $pre to $post"
- set_and_check_ofports $pre
- set_and_check_ofports $post
+ set_and_check_specific_ofports $pre
+ set_and_check_specific_ofports $post
done
done
AT_CHECK([test "$p1" = "$1" || test "$p2" = "$1"])
# The other port number must be different (already tested above).
else
- AT_CHECK([test "$1" = '[[]]' || test "$p1" == "$1"])
- AT_CHECK([test "$2" = '[[]]' || test "$p2" == "$2"])
+ AT_CHECK([test "$1" = '[[]]' || test "$p1" = "$1"])
+ AT_CHECK([test "$2" = '[[]]' || test "$p2" = "$2"])
fi
}
for pre in '1 2' '[[]] 2' '1 [[]]' '[[]] [[]]' '2 1' '[[]] 1' '2 [[]]' \
AT_CAPTURE_FILE([monitor.log])
# Send an OpenFlow14 message (05), OFPT_BUNDLE_CONTROL (21), length (10), xid (0a)
-ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 00 00 01"
+ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 00 00 02"
ovs-appctl -t ovs-ofctl ofctl/barrier
ovs-appctl -t ovs-ofctl exit
AT_CHECK([ofctl_strip < monitor.log], [], [dnl
send: OFPT_BUNDLE_CONTROL (OF1.4):
- bundle_id=0x1 type=OPEN_REQUEST flags=atomic
+ bundle_id=0x1 type=OPEN_REQUEST flags=ordered
OFPT_BUNDLE_CONTROL (OF1.4):
bundle_id=0x1 type=OPEN_REPLY flags=0
OFPT_BARRIER_REPLY (OF1.4):
AT_CAPTURE_FILE([monitor.log])
# Send twice an OpenFlow14 message (05), OFPT_BUNDLE_CONTROL (21), length (10), xid (0a)
-ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 00 00 01"
+ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 00 00 02"
ovs-appctl -t ovs-ofctl ofctl/barrier
-ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 00 00 01"
+ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 00 00 02"
ovs-appctl -t ovs-ofctl ofctl/barrier
ovs-appctl -t ovs-ofctl exit
AT_CHECK([ofctl_strip < monitor.log], [0], [dnl
send: OFPT_BUNDLE_CONTROL (OF1.4):
- bundle_id=0x1 type=OPEN_REQUEST flags=atomic
+ bundle_id=0x1 type=OPEN_REQUEST flags=ordered
OFPT_BUNDLE_CONTROL (OF1.4):
bundle_id=0x1 type=OPEN_REPLY flags=0
OFPT_BARRIER_REPLY (OF1.4):
send: OFPT_BUNDLE_CONTROL (OF1.4):
- bundle_id=0x1 type=OPEN_REQUEST flags=atomic
+ bundle_id=0x1 type=OPEN_REQUEST flags=ordered
OFPT_ERROR (OF1.4): OFPBFC_BAD_ID
OFPT_BUNDLE_CONTROL (OF1.4):
- bundle_id=0x1 type=OPEN_REQUEST flags=atomic
+ bundle_id=0x1 type=OPEN_REQUEST flags=ordered
OFPT_BARRIER_REPLY (OF1.4):
])
ovs-ofctl -O OpenFlow14 monitor br0 --detach --no-chdir --pidfile >monitor.log 2>&1
AT_CAPTURE_FILE([monitor.log])
-ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 02 00 01"
+ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 02 00 02"
ovs-appctl -t ovs-ofctl ofctl/barrier
ovs-appctl -t ovs-ofctl exit
AT_CHECK([ofctl_strip < monitor.log], [0], [dnl
send: OFPT_BUNDLE_CONTROL (OF1.4):
- bundle_id=0x1 type=CLOSE_REQUEST flags=atomic
+ bundle_id=0x1 type=CLOSE_REQUEST flags=ordered
OFPT_ERROR (OF1.4): OFPBFC_BAD_ID
OFPT_BUNDLE_CONTROL (OF1.4):
- bundle_id=0x1 type=CLOSE_REQUEST flags=atomic
+ bundle_id=0x1 type=CLOSE_REQUEST flags=ordered
OFPT_BARRIER_REPLY (OF1.4):
])
AT_CAPTURE_FILE([monitor.log])
# Open, Close, Close
-ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 00 00 01"
+ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 00 00 02"
ovs-appctl -t ovs-ofctl ofctl/barrier
-ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 02 00 01"
+ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 02 00 02"
ovs-appctl -t ovs-ofctl ofctl/barrier
-ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 02 00 01"
+ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 02 00 02"
ovs-appctl -t ovs-ofctl ofctl/barrier
ovs-appctl -t ovs-ofctl exit
AT_CHECK([ofctl_strip < monitor.log], [0], [dnl
send: OFPT_BUNDLE_CONTROL (OF1.4):
- bundle_id=0x1 type=OPEN_REQUEST flags=atomic
+ bundle_id=0x1 type=OPEN_REQUEST flags=ordered
OFPT_BUNDLE_CONTROL (OF1.4):
bundle_id=0x1 type=OPEN_REPLY flags=0
OFPT_BARRIER_REPLY (OF1.4):
send: OFPT_BUNDLE_CONTROL (OF1.4):
- bundle_id=0x1 type=CLOSE_REQUEST flags=atomic
+ bundle_id=0x1 type=CLOSE_REQUEST flags=ordered
OFPT_BUNDLE_CONTROL (OF1.4):
bundle_id=0x1 type=CLOSE_REPLY flags=0
OFPT_BARRIER_REPLY (OF1.4):
send: OFPT_BUNDLE_CONTROL (OF1.4):
- bundle_id=0x1 type=CLOSE_REQUEST flags=atomic
+ bundle_id=0x1 type=CLOSE_REQUEST flags=ordered
OFPT_ERROR (OF1.4): OFPBFC_BUNDLE_CLOSED
OFPT_BUNDLE_CONTROL (OF1.4):
- bundle_id=0x1 type=CLOSE_REQUEST flags=atomic
+ bundle_id=0x1 type=CLOSE_REQUEST flags=ordered
OFPT_BARRIER_REPLY (OF1.4):
])
AT_CAPTURE_FILE([monitor.log])
# Open, Close, Close
-ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 00 00 01"
+ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 00 00 02"
ovs-appctl -t ovs-ofctl ofctl/barrier
-ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 02 00 02"
+ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 02 00 01"
ovs-appctl -t ovs-ofctl ofctl/barrier
ovs-appctl -t ovs-ofctl exit
AT_CHECK([ofctl_strip < monitor.log], [0], [dnl
send: OFPT_BUNDLE_CONTROL (OF1.4):
- bundle_id=0x1 type=OPEN_REQUEST flags=atomic
+ bundle_id=0x1 type=OPEN_REQUEST flags=ordered
OFPT_BUNDLE_CONTROL (OF1.4):
bundle_id=0x1 type=OPEN_REPLY flags=0
OFPT_BARRIER_REPLY (OF1.4):
send: OFPT_BUNDLE_CONTROL (OF1.4):
- bundle_id=0x1 type=CLOSE_REQUEST flags=ordered
+ bundle_id=0x1 type=CLOSE_REQUEST flags=atomic
OFPT_ERROR (OF1.4): OFPBFC_BAD_FLAGS
OFPT_BUNDLE_CONTROL (OF1.4):
- bundle_id=0x1 type=CLOSE_REQUEST flags=ordered
+ bundle_id=0x1 type=CLOSE_REQUEST flags=atomic
OFPT_BARRIER_REPLY (OF1.4):
])
AT_CAPTURE_FILE([monitor.log])
# Open, Close, Close
-ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 04 00 01"
+ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 04 00 02"
ovs-appctl -t ovs-ofctl ofctl/barrier
ovs-appctl -t ovs-ofctl exit
AT_CHECK([ofctl_strip < monitor.log], [0], [dnl
send: OFPT_BUNDLE_CONTROL (OF1.4):
- bundle_id=0x1 type=COMMIT_REQUEST flags=atomic
+ bundle_id=0x1 type=COMMIT_REQUEST flags=ordered
OFPT_ERROR (OF1.4): OFPBFC_BAD_ID
OFPT_BUNDLE_CONTROL (OF1.4):
- bundle_id=0x1 type=COMMIT_REQUEST flags=atomic
+ bundle_id=0x1 type=COMMIT_REQUEST flags=ordered
OFPT_BARRIER_REPLY (OF1.4):
])
AT_CAPTURE_FILE([monitor.log])
# Open, Close, Close
-ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 00 00 01"
+ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 00 00 02"
ovs-appctl -t ovs-ofctl ofctl/barrier
-ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 04 00 02"
+ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 04 00 01"
ovs-appctl -t ovs-ofctl ofctl/barrier
ovs-appctl -t ovs-ofctl exit
AT_CHECK([ofctl_strip < monitor.log], [0], [dnl
send: OFPT_BUNDLE_CONTROL (OF1.4):
- bundle_id=0x1 type=OPEN_REQUEST flags=atomic
+ bundle_id=0x1 type=OPEN_REQUEST flags=ordered
OFPT_BUNDLE_CONTROL (OF1.4):
bundle_id=0x1 type=OPEN_REPLY flags=0
OFPT_BARRIER_REPLY (OF1.4):
send: OFPT_BUNDLE_CONTROL (OF1.4):
- bundle_id=0x1 type=COMMIT_REQUEST flags=ordered
+ bundle_id=0x1 type=COMMIT_REQUEST flags=atomic
OFPT_ERROR (OF1.4): OFPBFC_BAD_FLAGS
OFPT_BUNDLE_CONTROL (OF1.4):
- bundle_id=0x1 type=COMMIT_REQUEST flags=ordered
+ bundle_id=0x1 type=COMMIT_REQUEST flags=atomic
OFPT_BARRIER_REPLY (OF1.4):
])
AT_CAPTURE_FILE([monitor.log])
# Open, Close, Close
-ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 06 00 01"
+ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 06 00 02"
ovs-appctl -t ovs-ofctl ofctl/barrier
ovs-appctl -t ovs-ofctl exit
AT_CHECK([ofctl_strip < monitor.log], [0], [dnl
send: OFPT_BUNDLE_CONTROL (OF1.4):
- bundle_id=0x1 type=DISCARD_REQUEST flags=atomic
+ bundle_id=0x1 type=DISCARD_REQUEST flags=ordered
OFPT_ERROR (OF1.4): OFPBFC_BAD_ID
OFPT_BUNDLE_CONTROL (OF1.4):
- bundle_id=0x1 type=DISCARD_REQUEST flags=atomic
+ bundle_id=0x1 type=DISCARD_REQUEST flags=ordered
OFPT_BARRIER_REPLY (OF1.4):
])
OVS_VSWITCHD_STOP
AT_CLEANUP
+
+
+AT_SETUP([ofproto - bundle with multiple flow mods (OpenFlow 1.4)])
+AT_KEYWORDS([monitor])
+OVS_VSWITCHD_START
+
+AT_CHECK([ovs-appctl vlog/set vconn:dbg])
+
+AT_CHECK([ovs-ofctl del-flows br0])
+
+AT_DATA([flows.txt], [dnl
+add idle_timeout=50 in_port=2 dl_src=00:66:77:88:99:aa actions=1
+add idle_timeout=60 in_port=2 dl_src=00:77:88:99:aa:bb actions=2
+add idle_timeout=70 in_port=2 dl_src=00:88:99:aa:bb:cc actions=3
+add idle_timeout=50 in_port=2 dl_src=00:66:77:88:99:aa actions=4
+delete
+add idle_timeout=50 in_port=2 dl_src=00:66:77:88:99:aa actions=5
+add idle_timeout=60 in_port=2 dl_src=00:77:88:99:aa:bb actions=6
+add idle_timeout=70 in_port=2 dl_src=00:88:99:aa:bb:cc actions=7
+delete in_port=2 dl_src=00:88:99:aa:bb:cc
+])
+
+AT_CHECK([ovs-ofctl --bundle add-flows br0 flows.txt])
+
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ idle_timeout=50, in_port=2,dl_src=00:66:77:88:99:aa actions=output:5
+ idle_timeout=60, in_port=2,dl_src=00:77:88:99:aa:bb actions=output:6
+NXST_FLOW reply:
+])
+
+AT_DATA([flows.txt], [dnl
+modify actions=drop
+modify_strict in_port=2 dl_src=00:77:88:99:aa:bb actions=7
+])
+
+AT_CHECK([ovs-ofctl --bundle add-flows br0 flows.txt])
+
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ idle_timeout=50, in_port=2,dl_src=00:66:77:88:99:aa actions=drop
+ idle_timeout=60, in_port=2,dl_src=00:77:88:99:aa:bb actions=output:7
+NXST_FLOW reply:
+])
+
+# Adding an existing flow acts as a modify, and delete_strict also works.
+AT_DATA([flows.txt], [dnl
+add idle_timeout=60 in_port=2 dl_src=00:77:88:99:aa:bb actions=8
+delete_strict in_port=2 dl_src=00:66:77:88:99:aa
+add in_port=2 dl_src=00:66:77:88:99:aa actions=drop
+])
+
+AT_CHECK([ovs-ofctl --bundle add-flows br0 flows.txt])
+
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ idle_timeout=60, in_port=2,dl_src=00:77:88:99:aa:bb actions=output:8
+ in_port=2,dl_src=00:66:77:88:99:aa actions=drop
+NXST_FLOW reply:
+])
+
+dnl Check logs for OpenFlow trace
+# Prevent race.
+OVS_WAIT_UNTIL([vconn_sub < ovs-vswitchd.log | test `grep -- "|vconn|DBG|unix: sent (Success): NXST_FLOW reply" | wc -l` -ge 3])
+AT_CHECK([print_vconn_debug | vconn_sub | ofctl_strip], [0], [dnl
+vconn|DBG|unix: sent (Success): OFPT_HELLO (OF1.5):
+ version bitmap: 0x01, 0x02, 0x03, 0x04, 0x05, 0x06
+vconn|DBG|unix: received: OFPT_HELLO:
+ version bitmap: 0x01
+vconn|DBG|unix: negotiated OpenFlow version 0x01 (we support version 0x06 and earlier, peer supports version 0x01)
+vconn|DBG|unix: received: OFPT_FLOW_MOD: DEL actions=drop
+vconn|DBG|unix: received: OFPT_BARRIER_REQUEST:
+vconn|DBG|unix: sent (Success): OFPT_BARRIER_REPLY:
+vconn|DBG|unix: sent (Success): OFPT_HELLO (OF1.5):
+ version bitmap: 0x01, 0x02, 0x03, 0x04, 0x05, 0x06
+vconn|DBG|unix: received: OFPT_HELLO (OF1.4):
+ version bitmap: 0x05
+vconn|DBG|unix: negotiated OpenFlow version 0x05 (we support version 0x06 and earlier, peer supports version 0x05)
+vconn|DBG|unix: received: OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0 type=OPEN_REQUEST flags=atomic ordered
+vconn|DBG|unix: sent (Success): OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0 type=OPEN_REPLY flags=0
+vconn|DBG|unix: received: OFPT_BUNDLE_ADD_MESSAGE (OF1.4):
+ bundle_id=0 flags=atomic ordered
+OFPT_FLOW_MOD (OF1.4): ADD in_port=2,dl_src=00:66:77:88:99:aa idle:50 actions=output:1
+vconn|DBG|unix: received: OFPT_BUNDLE_ADD_MESSAGE (OF1.4):
+ bundle_id=0 flags=atomic ordered
+OFPT_FLOW_MOD (OF1.4): ADD in_port=2,dl_src=00:77:88:99:aa:bb idle:60 actions=output:2
+vconn|DBG|unix: received: OFPT_BUNDLE_ADD_MESSAGE (OF1.4):
+ bundle_id=0 flags=atomic ordered
+OFPT_FLOW_MOD (OF1.4): ADD in_port=2,dl_src=00:88:99:aa:bb:cc idle:70 actions=output:3
+vconn|DBG|unix: received: OFPT_BUNDLE_ADD_MESSAGE (OF1.4):
+ bundle_id=0 flags=atomic ordered
+OFPT_FLOW_MOD (OF1.4): ADD in_port=2,dl_src=00:66:77:88:99:aa idle:50 actions=output:4
+vconn|DBG|unix: received: OFPT_BUNDLE_ADD_MESSAGE (OF1.4):
+ bundle_id=0 flags=atomic ordered
+OFPT_FLOW_MOD (OF1.4): DEL table:255 actions=drop
+vconn|DBG|unix: received: OFPT_BUNDLE_ADD_MESSAGE (OF1.4):
+ bundle_id=0 flags=atomic ordered
+OFPT_FLOW_MOD (OF1.4): ADD in_port=2,dl_src=00:66:77:88:99:aa idle:50 actions=output:5
+vconn|DBG|unix: received: OFPT_BUNDLE_ADD_MESSAGE (OF1.4):
+ bundle_id=0 flags=atomic ordered
+OFPT_FLOW_MOD (OF1.4): ADD in_port=2,dl_src=00:77:88:99:aa:bb idle:60 actions=output:6
+vconn|DBG|unix: received: OFPT_BUNDLE_ADD_MESSAGE (OF1.4):
+ bundle_id=0 flags=atomic ordered
+OFPT_FLOW_MOD (OF1.4): ADD in_port=2,dl_src=00:88:99:aa:bb:cc idle:70 actions=output:7
+vconn|DBG|unix: received: OFPT_BUNDLE_ADD_MESSAGE (OF1.4):
+ bundle_id=0 flags=atomic ordered
+OFPT_FLOW_MOD (OF1.4): DEL table:255 in_port=2,dl_src=00:88:99:aa:bb:cc actions=drop
+vconn|DBG|unix: received: OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0 type=COMMIT_REQUEST flags=atomic ordered
+vconn|DBG|unix: sent (Success): OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0 type=COMMIT_REPLY flags=0
+vconn|DBG|unix: sent (Success): OFPT_HELLO (OF1.5):
+ version bitmap: 0x01, 0x02, 0x03, 0x04, 0x05, 0x06
+vconn|DBG|unix: received: OFPT_HELLO:
+ version bitmap: 0x01
+vconn|DBG|unix: negotiated OpenFlow version 0x01 (we support version 0x06 and earlier, peer supports version 0x01)
+vconn|DBG|unix: received: NXT_SET_FLOW_FORMAT: format=nxm
+vconn|DBG|unix: received: OFPT_BARRIER_REQUEST:
+vconn|DBG|unix: sent (Success): OFPT_BARRIER_REPLY:
+vconn|DBG|unix: received: NXST_FLOW request:
+vconn|DBG|unix: sent (Success): NXST_FLOW reply:
+ idle_timeout=50, in_port=2,dl_src=00:66:77:88:99:aa actions=output:5
+ idle_timeout=60, in_port=2,dl_src=00:77:88:99:aa:bb actions=output:6
+vconn|DBG|unix: sent (Success): OFPT_HELLO (OF1.5):
+ version bitmap: 0x01, 0x02, 0x03, 0x04, 0x05, 0x06
+vconn|DBG|unix: received: OFPT_HELLO (OF1.4):
+ version bitmap: 0x05
+vconn|DBG|unix: negotiated OpenFlow version 0x05 (we support version 0x06 and earlier, peer supports version 0x05)
+vconn|DBG|unix: received: OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0 type=OPEN_REQUEST flags=atomic ordered
+vconn|DBG|unix: sent (Success): OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0 type=OPEN_REPLY flags=0
+vconn|DBG|unix: received: OFPT_BUNDLE_ADD_MESSAGE (OF1.4):
+ bundle_id=0 flags=atomic ordered
+OFPT_FLOW_MOD (OF1.4): MOD actions=drop
+vconn|DBG|unix: received: OFPT_BUNDLE_ADD_MESSAGE (OF1.4):
+ bundle_id=0 flags=atomic ordered
+OFPT_FLOW_MOD (OF1.4): MOD_STRICT in_port=2,dl_src=00:77:88:99:aa:bb actions=output:7
+vconn|DBG|unix: received: OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0 type=COMMIT_REQUEST flags=atomic ordered
+vconn|DBG|unix: sent (Success): OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0 type=COMMIT_REPLY flags=0
+vconn|DBG|unix: sent (Success): OFPT_HELLO (OF1.5):
+ version bitmap: 0x01, 0x02, 0x03, 0x04, 0x05, 0x06
+vconn|DBG|unix: received: OFPT_HELLO:
+ version bitmap: 0x01
+vconn|DBG|unix: negotiated OpenFlow version 0x01 (we support version 0x06 and earlier, peer supports version 0x01)
+vconn|DBG|unix: received: NXT_SET_FLOW_FORMAT: format=nxm
+vconn|DBG|unix: received: OFPT_BARRIER_REQUEST:
+vconn|DBG|unix: sent (Success): OFPT_BARRIER_REPLY:
+vconn|DBG|unix: received: NXST_FLOW request:
+vconn|DBG|unix: sent (Success): NXST_FLOW reply:
+ idle_timeout=50, in_port=2,dl_src=00:66:77:88:99:aa actions=drop
+ idle_timeout=60, in_port=2,dl_src=00:77:88:99:aa:bb actions=output:7
+vconn|DBG|unix: sent (Success): OFPT_HELLO (OF1.5):
+ version bitmap: 0x01, 0x02, 0x03, 0x04, 0x05, 0x06
+vconn|DBG|unix: received: OFPT_HELLO (OF1.4):
+ version bitmap: 0x05
+vconn|DBG|unix: negotiated OpenFlow version 0x05 (we support version 0x06 and earlier, peer supports version 0x05)
+vconn|DBG|unix: received: OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0 type=OPEN_REQUEST flags=atomic ordered
+vconn|DBG|unix: sent (Success): OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0 type=OPEN_REPLY flags=0
+vconn|DBG|unix: received: OFPT_BUNDLE_ADD_MESSAGE (OF1.4):
+ bundle_id=0 flags=atomic ordered
+OFPT_FLOW_MOD (OF1.4): ADD in_port=2,dl_src=00:77:88:99:aa:bb idle:60 actions=output:8
+vconn|DBG|unix: received: OFPT_BUNDLE_ADD_MESSAGE (OF1.4):
+ bundle_id=0 flags=atomic ordered
+OFPT_FLOW_MOD (OF1.4): DEL_STRICT table:255 in_port=2,dl_src=00:66:77:88:99:aa actions=drop
+vconn|DBG|unix: received: OFPT_BUNDLE_ADD_MESSAGE (OF1.4):
+ bundle_id=0 flags=atomic ordered
+OFPT_FLOW_MOD (OF1.4): ADD in_port=2,dl_src=00:66:77:88:99:aa actions=drop
+vconn|DBG|unix: received: OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0 type=COMMIT_REQUEST flags=atomic ordered
+vconn|DBG|unix: sent (Success): OFPT_BUNDLE_CONTROL (OF1.4):
+ bundle_id=0 type=COMMIT_REPLY flags=0
+vconn|DBG|unix: sent (Success): OFPT_HELLO (OF1.5):
+ version bitmap: 0x01, 0x02, 0x03, 0x04, 0x05, 0x06
+vconn|DBG|unix: received: OFPT_HELLO:
+ version bitmap: 0x01
+vconn|DBG|unix: negotiated OpenFlow version 0x01 (we support version 0x06 and earlier, peer supports version 0x01)
+vconn|DBG|unix: received: NXT_SET_FLOW_FORMAT: format=nxm
+vconn|DBG|unix: received: OFPT_BARRIER_REQUEST:
+vconn|DBG|unix: sent (Success): OFPT_BARRIER_REPLY:
+vconn|DBG|unix: received: NXST_FLOW request:
+vconn|DBG|unix: sent (Success): NXST_FLOW reply:
+ idle_timeout=60, in_port=2,dl_src=00:77:88:99:aa:bb actions=output:8
+ in_port=2,dl_src=00:66:77:88:99:aa actions=drop
+])
+
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+
+AT_SETUP([ofproto - failing bundle commit (OpenFlow 1.4)])
+AT_KEYWORDS([monitor])
+OVS_VSWITCHD_START
+
+AT_CHECK([ovs-ofctl del-flows br0])
+
+ovs-ofctl add-flows br0 - <<EOF
+idle_timeout=50 in_port=2 dl_src=00:66:77:88:99:aa actions=11
+idle_timeout=60 in_port=2 dl_src=00:77:88:99:aa:bb actions=22
+idle_timeout=70 in_port=2 dl_src=00:88:99:aa:bb:cc actions=33
+EOF
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ idle_timeout=50, in_port=2,dl_src=00:66:77:88:99:aa actions=output:11
+ idle_timeout=60, in_port=2,dl_src=00:77:88:99:aa:bb actions=output:22
+ idle_timeout=70, in_port=2,dl_src=00:88:99:aa:bb:cc actions=output:33
+NXST_FLOW reply:
+])
+
+# last line uses illegal table number (OVS internal table)
+AT_DATA([flows.txt], [dnl
+add idle_timeout=50 in_port=2 dl_src=00:66:77:88:99:aa actions=1
+add idle_timeout=60 in_port=2 dl_src=00:77:88:99:aa:bb actions=2
+add idle_timeout=70 in_port=2 dl_src=00:88:99:aa:bb:cc actions=3
+modify idle_timeout=50 in_port=2 dl_src=00:66:77:88:99:aa actions=4
+delete
+add idle_timeout=50 in_port=2 dl_src=00:66:77:88:99:aa actions=5
+add idle_timeout=60 in_port=2 dl_src=00:77:88:99:aa:bb actions=6
+add idle_timeout=70 in_port=2 dl_src=00:88:99:aa:bb:cc actions=7
+delete in_port=2 dl_src=00:88:99:aa:bb:cc
+add table=254 actions=drop
+])
+
+AT_CHECK([ovs-ofctl --bundle add-flows br0 flows.txt 2>&1 | sed '/|WARN|/d
+s/unix:.*br0\.mgmt/unix:br0.mgmt/' | sed 's/(.* error)/(error)/'],
+[0], [dnl
+OFPT_ERROR (OF1.4) (xid=0xb): OFPBRC_EPERM
+OFPT_FLOW_MOD (OF1.4) (xid=0xb): ADD table:254 actions=drop
+OFPT_ERROR (OF1.4) (xid=0xd): OFPBFC_MSG_FAILED
+OFPT_BUNDLE_CONTROL (OF1.4) (xid=0xd):
+ bundle_id=0 type=COMMIT_REQUEST flags=atomic ordered
+ovs-ofctl: talking to unix:br0.mgmt (error)
+])
+
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
+ idle_timeout=50, in_port=2,dl_src=00:66:77:88:99:aa actions=output:11
+ idle_timeout=60, in_port=2,dl_src=00:77:88:99:aa:bb actions=output:22
+ idle_timeout=70, in_port=2,dl_src=00:88:99:aa:bb:cc actions=output:33
+NXST_FLOW reply:
+])
+
+OVS_VSWITCHD_STOP
+AT_CLEANUP
projects / cascardo / ovs.git / blobdiff