arch/arm/boot/dts/am335x-baltos-ir5221.dts

   1 /*
   2  * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8
   9 /*
  10  * VScom OnRISC
  11  * http://www.vscom.de
  12  */
  13
  14 /dts-v1/;
  15
  16 #include "am33xx.dtsi"
  17 #include <dt-bindings/pwm/pwm.h>
  18 #include <dt-bindings/interrupt-controller/irq.h>
  19
  20 / {
  21         model = "OnRISC Baltos iR 5221";
  22         compatible = "vscom,onrisc", "ti,am33xx";
  23
  24         cpus {
  25                 cpu@0 {
  26                         cpu0-supply = <&vdd1_reg>;
  27                 };
  28         };
  29
  30         memory {
  31                 device_type = "memory";
  32                 reg = <0x80000000 0x10000000>; /* 256 MB */
  33         };
  34
  35         vbat: fixedregulator@0 {
  36                 compatible = "regulator-fixed";
  37                 regulator-name = "vbat";
  38                 regulator-min-microvolt = <5000000>;
  39                 regulator-max-microvolt = <5000000>;
  40                 regulator-boot-on;
  41         };
  42
  43         wl12xx_vmmc: fixedregulator@2 {
  44                 pinctrl-names = "default";
  45                 pinctrl-0 = <&wl12xx_gpio>;
  46                 compatible = "regulator-fixed";
  47                 regulator-name = "vwl1271";
  48                 regulator-min-microvolt = <3300000>;
  49                 regulator-max-microvolt = <3300000>;
  50                 gpio = <&gpio3 8 0>;
  51                 startup-delay-us = <70000>;
  52                 enable-active-high;
  53         };
  54 };
  55
  56 &am33xx_pinmux {
  57         mmc2_pins: pinmux_mmc2_pins {
  58                 pinctrl-single,pins = <
  59                         AM33XX_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_ad8.mmc1_dat0_mux0 */
  60                         AM33XX_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_ad9.mmc1_dat1_mux0 */
  61                         AM33XX_IOPAD(0x828, PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_ad10.mmc1_dat2_mux0 */
  62                         AM33XX_IOPAD(0x82c, PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_ad11.mmc1_dat3_mux0 */
  63                         AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_csn1.mmc1_clk_mux0 */
  64                         AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_csn2.mmc1_cmd_mux0 */
  65                         AM33XX_IOPAD(0x9e4, PIN_INPUT_PULLUP | MUX_MODE7)      /* emu0.gpio3[7] */
  66                 >;
  67         };
  68
  69         wl12xx_gpio: pinmux_wl12xx_gpio {
  70                 pinctrl-single,pins = <
  71                         AM33XX_IOPAD(0x9e8, PIN_OUTPUT_PULLUP | MUX_MODE7)      /* emu1.gpio3[8] */
  72                 >;
  73         };
  74
  75         tps65910_pins: pinmux_tps65910_pins {
  76                 pinctrl-single,pins = <
  77                         AM33XX_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE7)      /* gpmc_ben1.gpio1[28] */
  78                 >;
  79         };
  80
  81         tca6416_pins: pinmux_tca6416_pins {
  82                 pinctrl-single,pins = <
  83                         AM33XX_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE7)      /* xdma_event_intr1.gpio0[20] tca6416 stuff */
  84                 >;
  85         };
  86
  87         i2c1_pins: pinmux_i2c1_pins {
  88                 pinctrl-single,pins = <
  89                         AM33XX_IOPAD(0x958, PIN_INPUT | MUX_MODE2)      /* spi0_d1.i2c1_sda_mux3 */
  90                         AM33XX_IOPAD(0x95c, PIN_INPUT | MUX_MODE2)      /* spi0_cs0.i2c1_scl_mux3 */
  91                 >;
  92         };
  93
  94         dcan1_pins: pinmux_dcan1_pins {
  95                 pinctrl-single,pins = <
  96                         AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE2)      /* uart0_ctsn.dcan1_tx_mux0 */
  97                         AM33XX_IOPAD(0x96c, PIN_INPUT | MUX_MODE2)      /* uart0_rtsn.dcan1_rx_mux0 */
  98                 >;
  99         };
 100
 101         uart0_pins: pinmux_uart0_pins {
 102                 pinctrl-single,pins = <
 103                         AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)       /* uart0_rxd.uart0_rxd */
 104                         AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)            /* uart0_txd.uart0_txd */
 105                 >;
 106         };
 107
 108         uart1_pins: pinmux_uart1_pins {
 109                 pinctrl-single,pins = <
 110                         AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE0)      /* uart1_rxd */
 111                         AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE0)      /* uart1_txd */
 112                         AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* uart1_ctsn, INPUT | MODE0 */
 113                         AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* uart1_rtsn, OUTPUT | MODE0 */
 114                         AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* lcd_vsync.gpio2[22] DTR */
 115                         AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_hsync.gpio2[23] DSR */
 116                         AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_pclk.gpio2[24] DCD */
 117                         AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_ac_bias_en.gpio2[25] RI */
 118                 >;
 119         };
 120
 121         uart2_pins: pinmux_uart2_pins {
 122                 pinctrl-single,pins = <
 123                         AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1)      /* spi0_sclk.uart2_rxd_mux3 */
 124                         AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1)      /* spi0_d0.uart2_txd_mux3 */
 125                         AM33XX_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* i2c0_sda.uart2_ctsn_mux0 */
 126                         AM33XX_IOPAD(0x98c, PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* i2c0_scl.uart2_rtsn_mux0 */
 127                         AM33XX_IOPAD(0x830, PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* gpmc_ad12.gpio1[12] DTR */
 128                         AM33XX_IOPAD(0x834, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* gpmc_ad13.gpio1[13] DSR */
 129                         AM33XX_IOPAD(0x838, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* gpmc_ad14.gpio1[14] DCD */
 130                         AM33XX_IOPAD(0x83c, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_ad15.gpio1[15] RI */
 131
 132                         AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLUP | MUX_MODE7)      /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */
 133                 >;
 134         };
 135
 136         cpsw_default: cpsw_default {
 137                 pinctrl-single,pins = <
 138                         /* Slave 1 */
 139                         AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1)       /* mii1_crs.rmii1_crs_dv */
 140                         AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1)      /* mii1_tx_en.rmii1_txen */
 141                         AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1)      /* mii1_txd1.rmii1_txd1 */
 142                         AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1)      /* mii1_txd0.rmii1_txd0 */
 143                         AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1)      /* mii1_rxd1.rmii1_rxd1 */
 144                         AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1)      /* mii1_rxd0.rmii1_rxd0 */
 145                         AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0)      /* rmii1_ref_clk.rmii1_refclk */
 146
 147
 148                         /* Slave 2 */
 149                         AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* gpmc_a0.rgmii2_tctl */
 150                         AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE2)     /* gpmc_a1.rgmii2_rctl */
 151                         AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* gpmc_a2.rgmii2_td3 */
 152                         AM33XX_IOPAD(0x84c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* gpmc_a3.rgmii2_td2 */
 153                         AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* gpmc_a4.rgmii2_td1 */
 154                         AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* gpmc_a5.rgmii2_td0 */
 155                         AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* gpmc_a6.rgmii2_tclk */
 156                         AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE2)     /* gpmc_a7.rgmii2_rclk */
 157                         AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE2)     /* gpmc_a8.rgmii2_rd3 */
 158                         AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE2)     /* gpmc_a9.rgmii2_rd2 */
 159                         AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE2)     /* gpmc_a10.rgmii2_rd1 */
 160                         AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE2)     /* gpmc_a11.rgmii2_rd0 */
 161                 >;
 162         };
 163
 164         cpsw_sleep: cpsw_sleep {
 165                 pinctrl-single,pins = <
 166                         /* Slave 1 reset value */
 167                         AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 168                         AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
 169                         AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
 170                         AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
 171                         AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 172                         AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
 173                         AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
 174
 175                         /* Slave 2 reset value*/
 176                         AM33XX_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7)
 177                         AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7)
 178                         AM33XX_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7)
 179                         AM33XX_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 180                         AM33XX_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7)
 181                         AM33XX_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7)
 182                         AM33XX_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7)
 183                         AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 184                         AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7)
 185                         AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)
 186                         AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)
 187                         AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 188                 >;
 189         };
 190
 191         davinci_mdio_default: davinci_mdio_default {
 192                 pinctrl-single,pins = <
 193                         /* MDIO */
 194                         AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)       /* mdio_data.mdio_data */
 195                         AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)                      /* mdio_clk.mdio_clk */
 196                 >;
 197         };
 198
 199         davinci_mdio_sleep: davinci_mdio_sleep {
 200                 pinctrl-single,pins = <
 201                         /* MDIO reset value */
 202                         AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
 203                         AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 204                 >;
 205         };
 206
 207         nandflash_pins_s0: nandflash_pins_s0 {
 208                 pinctrl-single,pins = <
 209                         AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0)       /* gpmc_ad0.gpmc_ad0 */
 210                         AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0)       /* gpmc_ad1.gpmc_ad1 */
 211                         AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0)       /* gpmc_ad2.gpmc_ad2 */
 212                         AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0)       /* gpmc_ad3.gpmc_ad3 */
 213                         AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0)       /* gpmc_ad4.gpmc_ad4 */
 214                         AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0)       /* gpmc_ad5.gpmc_ad5 */
 215                         AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0)       /* gpmc_ad6.gpmc_ad6 */
 216                         AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0)       /* gpmc_ad7.gpmc_ad7 */
 217                         AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)       /* gpmc_wait0.gpmc_wait0 */
 218                         AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7)       /* gpmc_wpn.gpio0_30 */
 219                         AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)             /* gpmc_csn0.gpmc_csn0  */
 220                         AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)             /* gpmc_advn_ale.gpmc_advn_ale */
 221                         AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)             /* gpmc_oen_ren.gpmc_oen_ren */
 222                         AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)             /* gpmc_wen.gpmc_wen */
 223                         AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)             /* gpmc_be0n_cle.gpmc_be0n_cle */
 224                 >;
 225         };
 226 };
 227
 228 &elm {
 229         status = "okay";
 230 };
 231
 232 &gpmc {
 233         pinctrl-names = "default";
 234         pinctrl-0 = <&nandflash_pins_s0>;
 235         ranges = <0 0 0x08000000 0x10000000>;   /* CS0: NAND */
 236         status = "okay";
 237
 238         nand@0,0 {
 239                 compatible = "ti,omap2-nand";
 240                 reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
 241                 interrupt-parent = <&gpmc>;
 242                 interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 243                              <1 IRQ_TYPE_NONE>; /* termcount */
 244                 nand-bus-width = <8>;
 245                 ti,nand-ecc-opt = "bch8";
 246                 ti,nand-xfer-type = "polled";
 247
 248                 gpmc,device-nand = "true";
 249                 gpmc,device-width = <1>;
 250                 gpmc,sync-clk-ps = <0>;
 251                 gpmc,cs-on-ns = <0>;
 252                 gpmc,cs-rd-off-ns = <44>;
 253                 gpmc,cs-wr-off-ns = <44>;
 254                 gpmc,adv-on-ns = <6>;
 255                 gpmc,adv-rd-off-ns = <34>;
 256                 gpmc,adv-wr-off-ns = <44>;
 257                 gpmc,we-on-ns = <0>;
 258                 gpmc,we-off-ns = <40>;
 259                 gpmc,oe-on-ns = <0>;
 260                 gpmc,oe-off-ns = <54>;
 261                 gpmc,access-ns = <64>;
 262                 gpmc,rd-cycle-ns = <82>;
 263                 gpmc,wr-cycle-ns = <82>;
 264                 gpmc,wait-on-read = "true";
 265                 gpmc,wait-on-write = "true";
 266                 gpmc,bus-turnaround-ns = <0>;
 267                 gpmc,cycle2cycle-delay-ns = <0>;
 268                 gpmc,clk-activation-ns = <0>;
 269                 gpmc,wait-monitoring-ns = <0>;
 270                 gpmc,wr-access-ns = <40>;
 271                 gpmc,wr-data-mux-bus-ns = <0>;
 272
 273                 #address-cells = <1>;
 274                 #size-cells = <1>;
 275                 elm_id = <&elm>;
 276         };
 277 };
 278
 279 &uart0 {
 280         pinctrl-names = "default";
 281         pinctrl-0 = <&uart0_pins>;
 282
 283         status = "okay";
 284 };
 285
 286 &uart1 {
 287         pinctrl-names = "default";
 288         pinctrl-0 = <&uart1_pins>;
 289         dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
 290         dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
 291         dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
 292         rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
 293         cts-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
 294         rts-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
 295
 296         status = "okay";
 297 };
 298
 299 &uart2 {
 300         pinctrl-names = "default";
 301         pinctrl-0 = <&uart2_pins>;
 302         dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
 303         dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
 304         dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 305         rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 306         cts-gpios = <&gpio3 5 GPIO_ACTIVE_LOW>;
 307         rts-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
 308
 309         status = "okay";
 310 };
 311
 312 &i2c1 {
 313         pinctrl-names = "default";
 314         pinctrl-0 = <&i2c1_pins>;
 315
 316         status = "okay";
 317         clock-frequency = <400000>;
 318
 319         tps: tps@2d {
 320                 reg = <0x2d>;
 321                 gpio-controller;
 322                 #gpio-cells = <2>;
 323                 interrupt-parent = <&gpio1>;
 324                 interrupts = <28 GPIO_ACTIVE_LOW>;
 325                 pinctrl-names = "default";
 326                 pinctrl-0 = <&tps65910_pins>;
 327         };
 328
 329         at24@50 {
 330                 compatible = "at24,24c02";
 331                 pagesize = <8>;
 332                 reg = <0x50>;
 333         };
 334
 335         tca6416: gpio@20 {
 336                 compatible = "ti,tca6416";
 337                 reg = <0x20>;
 338                 gpio-controller;
 339                 #gpio-cells = <2>;
 340                 interrupt-parent = <&gpio0>;
 341                 interrupts = <20 GPIO_ACTIVE_LOW>;
 342                 pinctrl-names = "default";
 343                 pinctrl-0 = <&tca6416_pins>;
 344         };
 345 };
 346
 347 &usb {
 348         status = "okay";
 349 };
 350
 351 &usb_ctrl_mod {
 352         status = "okay";
 353 };
 354
 355 &usb0_phy {
 356         status = "okay";
 357 };
 358
 359 &usb1_phy {
 360         status = "okay";
 361 };
 362
 363 &usb0 {
 364         status = "okay";
 365         dr_mode = "host";
 366 };
 367
 368 &usb1 {
 369         status = "okay";
 370         dr_mode = "otg";
 371 };
 372
 373 &cppi41dma  {
 374         status = "okay";
 375 };
 376
 377 #include "tps65910.dtsi"
 378
 379 &tps {
 380         vcc1-supply = <&vbat>;
 381         vcc2-supply = <&vbat>;
 382         vcc3-supply = <&vbat>;
 383         vcc4-supply = <&vbat>;
 384         vcc5-supply = <&vbat>;
 385         vcc6-supply = <&vbat>;
 386         vcc7-supply = <&vbat>;
 387         vccio-supply = <&vbat>;
 388
 389         ti,en-ck32k-xtal = <1>;
 390
 391         regulators {
 392                 vrtc_reg: regulator@0 {
 393                         regulator-always-on;
 394                 };
 395
 396                 vio_reg: regulator@1 {
 397                         regulator-always-on;
 398                 };
 399
 400                 vdd1_reg: regulator@2 {
 401                         /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
 402                         regulator-name = "vdd_mpu";
 403                         regulator-min-microvolt = <912500>;
 404                         regulator-max-microvolt = <1312500>;
 405                         regulator-boot-on;
 406                         regulator-always-on;
 407                 };
 408
 409                 vdd2_reg: regulator@3 {
 410                         /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
 411                         regulator-name = "vdd_core";
 412                         regulator-min-microvolt = <912500>;
 413                         regulator-max-microvolt = <1150000>;
 414                         regulator-boot-on;
 415                         regulator-always-on;
 416                 };
 417
 418                 vdd3_reg: regulator@4 {
 419                         regulator-always-on;
 420                 };
 421
 422                 vdig1_reg: regulator@5 {
 423                         regulator-always-on;
 424                 };
 425
 426                 vdig2_reg: regulator@6 {
 427                         regulator-always-on;
 428                 };
 429
 430                 vpll_reg: regulator@7 {
 431                         regulator-always-on;
 432                 };
 433
 434                 vdac_reg: regulator@8 {
 435                         regulator-always-on;
 436                 };
 437
 438                 vaux1_reg: regulator@9 {
 439                         regulator-always-on;
 440                 };
 441
 442                 vaux2_reg: regulator@10 {
 443                         regulator-always-on;
 444                 };
 445
 446                 vaux33_reg: regulator@11 {
 447                         regulator-always-on;
 448                 };
 449
 450                 vmmc_reg: regulator@12 {
 451                         regulator-min-microvolt = <1800000>;
 452                         regulator-max-microvolt = <3300000>;
 453                         regulator-always-on;
 454                 };
 455         };
 456 };
 457
 458 &mac {
 459         pinctrl-names = "default", "sleep";
 460         pinctrl-0 = <&cpsw_default>;
 461         pinctrl-1 = <&cpsw_sleep>;
 462         dual_emac = <1>;
 463
 464         status = "okay";
 465 };
 466
 467 &davinci_mdio {
 468         pinctrl-names = "default", "sleep";
 469         pinctrl-0 = <&davinci_mdio_default>;
 470         pinctrl-1 = <&davinci_mdio_sleep>;
 471
 472         status = "okay";
 473 };
 474
 475 &cpsw_emac0 {
 476         phy_id = <&davinci_mdio>, <0>;
 477         phy-mode = "rmii";
 478         dual_emac_res_vlan = <1>;
 479 };
 480
 481 &cpsw_emac1 {
 482         phy_id = <&davinci_mdio>, <7>;
 483         phy-mode = "rgmii-txid";
 484         dual_emac_res_vlan = <2>;
 485 };
 486
 487 &phy_sel {
 488         rmii-clock-ext = <1>;
 489 };
 490
 491 &mmc1 {
 492         vmmc-supply = <&vmmc_reg>;
 493         status = "okay";
 494 };
 495
 496 &mmc2 {
 497         status = "okay";
 498         vmmc-supply = <&wl12xx_vmmc>;
 499         ti,non-removable;
 500         bus-width = <4>;
 501         cap-power-off-card;
 502         pinctrl-names = "default";
 503         pinctrl-0 = <&mmc2_pins>;
 504
 505         #address-cells = <1>;
 506         #size-cells = <0>;
 507         wlcore: wlcore@2 {
 508                 compatible = "ti,wl1835";
 509                 reg = <2>;
 510                 interrupt-parent = <&gpio3>;
 511                 interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
 512         };
 513 };
 514
 515 &sham {
 516         status = "okay";
 517 };
 518
 519 &aes {
 520         status = "okay";
 521 };
 522
 523 &gpio0 {
 524         ti,no-reset-on-init;
 525 };
 526
 527 &dcan1 {
 528         pinctrl-names = "default";
 529         pinctrl-0 = <&dcan1_pins>;
 530
 531         status = "okay";
 532 };