arch/sh/boards/Kconfig

   1 menu "Board support"
   2
   3 config SOLUTION_ENGINE
   4         bool
   5
   6 config SH_ALPHA_BOARD
   7         bool
   8
   9 config SH_DEVICE_TREE
  10         bool "Board Described by Device Tree"
  11         select OF
  12         select OF_EARLY_FLATTREE
  13         select CLKSRC_OF
  14         select COMMON_CLK
  15         select GENERIC_CALIBRATE_DELAY
  16         help
  17           Select Board Described by Device Tree to build a kernel that
  18           does not hard-code any board-specific knowledge but instead uses
  19           a device tree blob provided by the boot-loader. You must enable
  20           drivers for any hardware you want to use separately. At this
  21           time, only boards based on the open-hardware J-Core processors
  22           have sufficient driver coverage to use this option; do not
  23           select it if you are using original SuperH hardware.
  24
  25 config SH_SOLUTION_ENGINE
  26         bool "SolutionEngine"
  27         select SOLUTION_ENGINE
  28         select CPU_HAS_IPR_IRQ
  29         depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \
  30           CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \
  31           CPU_SUBTYPE_SH7750R
  32         help
  33           Select SolutionEngine if configuring for a Hitachi SH7705, SH7709,
  34           SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board.
  35
  36 config SH_7206_SOLUTION_ENGINE
  37         bool "SolutionEngine7206"
  38         select SOLUTION_ENGINE
  39         depends on CPU_SUBTYPE_SH7206
  40         help
  41           Select 7206 SolutionEngine if configuring for a Hitachi SH7206
  42           evaluation board.
  43
  44 config SH_7619_SOLUTION_ENGINE
  45         bool "SolutionEngine7619"
  46         select SOLUTION_ENGINE
  47         depends on CPU_SUBTYPE_SH7619
  48         help
  49           Select 7619 SolutionEngine if configuring for a Hitachi SH7619
  50           evaluation board.
  51
  52 config SH_7721_SOLUTION_ENGINE
  53         bool "SolutionEngine7721"
  54         select SOLUTION_ENGINE
  55         depends on CPU_SUBTYPE_SH7721
  56         help
  57           Select 7721 SolutionEngine if configuring for a Hitachi SH7721
  58           evaluation board.
  59
  60 config SH_7722_SOLUTION_ENGINE
  61         bool "SolutionEngine7722"
  62         select SOLUTION_ENGINE
  63         select GENERIC_IRQ_CHIP
  64         select IRQ_DOMAIN
  65         depends on CPU_SUBTYPE_SH7722
  66         help
  67           Select 7722 SolutionEngine if configuring for a Hitachi SH772
  68           evaluation board.
  69
  70 config SH_7724_SOLUTION_ENGINE
  71         bool "SolutionEngine7724"
  72         select SOLUTION_ENGINE
  73         depends on CPU_SUBTYPE_SH7724
  74         select GPIOLIB
  75         select SND_SOC_AK4642 if SND_SIMPLE_CARD
  76         select REGULATOR_FIXED_VOLTAGE if REGULATOR
  77         help
  78           Select 7724 SolutionEngine if configuring for a Hitachi SH7724
  79           evaluation board.
  80
  81 config SH_7751_SOLUTION_ENGINE
  82         bool "SolutionEngine7751"
  83         select SOLUTION_ENGINE
  84         select CPU_HAS_IPR_IRQ
  85         depends on CPU_SUBTYPE_SH7751
  86         help
  87           Select 7751 SolutionEngine if configuring for a Hitachi SH7751
  88           evaluation board.
  89
  90 config SH_7780_SOLUTION_ENGINE
  91         bool "SolutionEngine7780"
  92         select SOLUTION_ENGINE
  93         select SYS_SUPPORTS_PCI
  94         depends on CPU_SUBTYPE_SH7780
  95         help
  96           Select 7780 SolutionEngine if configuring for a Renesas SH7780
  97           evaluation board.
  98
  99 config SH_7343_SOLUTION_ENGINE
 100         bool "SolutionEngine7343"
 101         select SOLUTION_ENGINE
 102         select GENERIC_IRQ_CHIP
 103         select IRQ_DOMAIN
 104         depends on CPU_SUBTYPE_SH7343
 105         help
 106           Select 7343 SolutionEngine if configuring for a Hitachi
 107           SH7343 (SH-Mobile 3AS) evaluation board.
 108
 109 config SH_HP6XX
 110         bool "HP6XX"
 111         select SYS_SUPPORTS_APM_EMULATION
 112         select HD6446X_SERIES
 113         depends on CPU_SUBTYPE_SH7709
 114         help
 115           Select HP6XX if configuring for a HP jornada HP6xx.
 116           More information (hardware only) at
 117           <http://www.hp.com/jornada/>.
 118
 119 config SH_DREAMCAST
 120         bool "Dreamcast"
 121         select SYS_SUPPORTS_PCI
 122         depends on CPU_SUBTYPE_SH7091
 123         help
 124           Select Dreamcast if configuring for a SEGA Dreamcast.
 125           More information at <http://www.linux-sh.org>
 126
 127 config SH_SH03
 128         bool "Interface CTP/PCI-SH03"
 129         depends on CPU_SUBTYPE_SH7751
 130         select CPU_HAS_IPR_IRQ
 131         select SYS_SUPPORTS_PCI
 132         help
 133           CTP/PCI-SH03 is a CPU module computer that is produced
 134           by Interface Corporation.
 135           More information at <http://www.interface.co.jp>
 136
 137 config SH_SECUREEDGE5410
 138         bool "SecureEdge5410"
 139         depends on CPU_SUBTYPE_SH7751R
 140         select CPU_HAS_IPR_IRQ
 141         select SYS_SUPPORTS_PCI
 142         help
 143           Select SecureEdge5410 if configuring for a SnapGear SH board.
 144           This includes both the OEM SecureEdge products as well as the
 145           SME product line.
 146
 147 config SH_RTS7751R2D
 148         bool "RTS7751R2D"
 149         depends on CPU_SUBTYPE_SH7751R
 150         select SYS_SUPPORTS_PCI
 151         select IO_TRAPPED if MMU
 152         help
 153           Select RTS7751R2D if configuring for a Renesas Technology
 154           Sales SH-Graphics board.
 155
 156 config SH_RSK
 157         bool "Renesas Starter Kit"
 158         depends on CPU_SUBTYPE_SH7201 || CPU_SUBTYPE_SH7203 || \
 159           CPU_SUBTYPE_SH7264 || CPU_SUBTYPE_SH7269
 160         select REGULATOR_FIXED_VOLTAGE if REGULATOR
 161         help
 162          Select this option if configuring for any of the RSK+ MCU
 163          evaluation platforms.
 164
 165 config SH_SDK7780
 166         bool "SDK7780R3"
 167         depends on CPU_SUBTYPE_SH7780
 168         select SYS_SUPPORTS_PCI
 169         help
 170           Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3
 171           evaluation board.
 172
 173 config SH_SDK7786
 174         bool "SDK7786"
 175         depends on CPU_SUBTYPE_SH7786
 176         select SYS_SUPPORTS_PCI
 177         select NO_IOPORT_MAP if !PCI
 178         select HAVE_SRAM_POOL
 179         select REGULATOR_FIXED_VOLTAGE if REGULATOR
 180         help
 181           Select SDK7786 if configuring for a Renesas Technology Europe
 182           SH7786-65nm board.
 183
 184 config SH_HIGHLANDER
 185         bool "Highlander"
 186         depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
 187         select SYS_SUPPORTS_PCI
 188         select IO_TRAPPED if MMU
 189
 190 config SH_SH7757LCR
 191         bool "SH7757LCR"
 192         depends on CPU_SUBTYPE_SH7757
 193         select GPIOLIB
 194         select REGULATOR_FIXED_VOLTAGE if REGULATOR
 195
 196 config SH_SH7785LCR
 197         bool "SH7785LCR"
 198         depends on CPU_SUBTYPE_SH7785
 199         select SYS_SUPPORTS_PCI
 200
 201 config SH_SH7785LCR_29BIT_PHYSMAPS
 202         bool "SH7785LCR 29bit physmaps"
 203         depends on SH_SH7785LCR && 29BIT
 204         default y
 205         help
 206           This board has 2 physical memory maps. It can be changed with
 207           DIP switch(S2-5). If you set the DIP switch for S2-5 = ON,
 208           you can access all on-board device in 29bit address mode.
 209
 210 config SH_SH7785LCR_PT
 211         bool "SH7785LCR prototype board on 32-bit MMU mode"
 212         depends on SH_SH7785LCR && 32BIT
 213         default n
 214         help
 215           If you use prototype board, this option is enabled.
 216
 217 config SH_URQUELL
 218         bool "Urquell"
 219         depends on CPU_SUBTYPE_SH7786
 220         select GPIOLIB
 221         select SYS_SUPPORTS_PCI
 222         select NO_IOPORT_MAP if !PCI
 223
 224 config SH_MIGOR
 225         bool "Migo-R"
 226         depends on CPU_SUBTYPE_SH7722
 227         select GPIOLIB
 228         select REGULATOR_FIXED_VOLTAGE if REGULATOR
 229         help
 230           Select Migo-R if configuring for the SH7722 Migo-R platform
 231           by Renesas System Solutions Asia Pte. Ltd.
 232
 233 config SH_AP325RXA
 234         bool "AP-325RXA"
 235         depends on CPU_SUBTYPE_SH7723
 236         select GPIOLIB
 237         select REGULATOR_FIXED_VOLTAGE if REGULATOR
 238         help
 239           Renesas "AP-325RXA" support.
 240           Compatible with ALGO SYSTEM CO.,LTD. "AP-320A"
 241
 242 config SH_KFR2R09
 243         bool "KFR2R09"
 244         depends on CPU_SUBTYPE_SH7724
 245         select GPIOLIB
 246         select REGULATOR_FIXED_VOLTAGE if REGULATOR
 247         help
 248           "Kit For R2R for 2009" support.
 249
 250 config SH_ECOVEC
 251         bool "EcoVec"
 252         depends on CPU_SUBTYPE_SH7724
 253         select GPIOLIB
 254         select SND_SOC_DA7210 if SND_SIMPLE_CARD
 255         select REGULATOR_FIXED_VOLTAGE if REGULATOR
 256         help
 257           Renesas "R0P7724LC0011/21RL (EcoVec)" support.
 258
 259 config SH_SH7763RDP
 260         bool "SH7763RDP"
 261         depends on CPU_SUBTYPE_SH7763
 262         help
 263           Select SH7763RDP if configuring for a Renesas SH7763
 264           evaluation board.
 265
 266 config SH_ESPT
 267         bool "ESPT"
 268         depends on CPU_SUBTYPE_SH7763
 269         help
 270           Select ESPT if configuring for a Renesas SH7763
 271           with gigabit ether evaluation board.
 272
 273 config SH_EDOSK7705
 274         bool "EDOSK7705"
 275         depends on CPU_SUBTYPE_SH7705
 276
 277 config SH_EDOSK7760
 278         bool "EDOSK7760"
 279         depends on CPU_SUBTYPE_SH7760
 280         help
 281           Select if configuring for a Renesas EDOSK7760
 282           evaluation board.
 283
 284 config SH_SH4202_MICRODEV
 285         bool "SH4-202 MicroDev"
 286         depends on CPU_SUBTYPE_SH4_202
 287         help
 288           Select SH4-202 MicroDev if configuring for a SuperH MicroDev board
 289           with an SH4-202 CPU.
 290
 291 config SH_LANDISK
 292         bool "LANDISK"
 293         depends on CPU_SUBTYPE_SH7751R
 294         select SYS_SUPPORTS_PCI
 295         help
 296           I-O DATA DEVICE, INC. "LANDISK Series" support.
 297
 298 config SH_TITAN
 299         bool "TITAN"
 300         depends on CPU_SUBTYPE_SH7751R
 301         select CPU_HAS_IPR_IRQ
 302         select SYS_SUPPORTS_PCI
 303         help
 304           Select Titan if you are configuring for a Nimble Microsystems
 305           NetEngine NP51R.
 306
 307 config SH_SHMIN
 308         bool "SHMIN"
 309         depends on CPU_SUBTYPE_SH7706
 310         select CPU_HAS_IPR_IRQ
 311         help
 312           Select SHMIN if configuring for the SHMIN board.
 313
 314 config SH_LBOX_RE2
 315         bool "L-BOX RE2"
 316         depends on CPU_SUBTYPE_SH7751R
 317         select SYS_SUPPORTS_PCI
 318         help
 319           Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
 320
 321 config SH_X3PROTO
 322         bool "SH-X3 Prototype board"
 323         depends on CPU_SUBTYPE_SHX3
 324         select NO_IOPORT_MAP if !PCI
 325         select IRQ_DOMAIN
 326
 327 config SH_MAGIC_PANEL_R2
 328         bool "Magic Panel R2"
 329         depends on CPU_SUBTYPE_SH7720
 330         select GPIOLIB
 331         select REGULATOR_FIXED_VOLTAGE if REGULATOR
 332         help
 333           Select Magic Panel R2 if configuring for Magic Panel R2.
 334
 335 config SH_CAYMAN
 336         bool "Hitachi Cayman"
 337         depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103
 338         select SYS_SUPPORTS_PCI
 339         select ARCH_MIGHT_HAVE_PC_SERIO
 340
 341 config SH_POLARIS
 342         bool "SMSC Polaris"
 343         select CPU_HAS_IPR_IRQ
 344         select REGULATOR_FIXED_VOLTAGE if REGULATOR
 345         depends on CPU_SUBTYPE_SH7709
 346         help
 347           Select if configuring for an SMSC Polaris development board
 348
 349 config SH_SH2007
 350         bool "SH-2007 board"
 351         select NO_IOPORT_MAP
 352         select REGULATOR_FIXED_VOLTAGE if REGULATOR
 353         depends on CPU_SUBTYPE_SH7780
 354         help
 355           SH-2007 is a single-board computer based around SH7780 chip
 356           intended for embedded applications.
 357           It has an Ethernet interface (SMC9118), direct connected
 358           Compact Flash socket, two serial ports and PC-104 bus.
 359           More information at <http://sh2000.sh-linux.org>.
 360
 361 config SH_APSH4A3A
 362         bool "AP-SH4A-3A"
 363         select SH_ALPHA_BOARD
 364         select REGULATOR_FIXED_VOLTAGE if REGULATOR
 365         depends on CPU_SUBTYPE_SH7785
 366         help
 367           Select AP-SH4A-3A if configuring for an ALPHAPROJECT AP-SH4A-3A.
 368
 369 config SH_APSH4AD0A
 370         bool "AP-SH4AD-0A"
 371         select SH_ALPHA_BOARD
 372         select SYS_SUPPORTS_PCI
 373         select REGULATOR_FIXED_VOLTAGE if REGULATOR
 374         depends on CPU_SUBTYPE_SH7786
 375         help
 376           Select AP-SH4AD-0A if configuring for an ALPHAPROJECT AP-SH4AD-0A.
 377
 378 source "arch/sh/boards/mach-r2d/Kconfig"
 379 source "arch/sh/boards/mach-highlander/Kconfig"
 380 source "arch/sh/boards/mach-sdk7780/Kconfig"
 381 source "arch/sh/boards/mach-migor/Kconfig"
 382 source "arch/sh/boards/mach-rsk/Kconfig"
 383
 384 if SH_MAGIC_PANEL_R2
 385
 386 menu "Magic Panel R2 options"
 387
 388 config SH_MAGIC_PANEL_R2_VERSION
 389         int "Magic Panel R2 Version"
 390         default "3"
 391         help
 392           Set the version of the Magic Panel R2
 393
 394 endmenu
 395
 396 endif
 397
 398 endmenu