drivers/mmc/host/sdhci-pxav3.c

   1 /*
   2  * Copyright (C) 2010 Marvell International Ltd.
   3  *              Zhangfei Gao <zhangfei.gao@marvell.com>
   4  *              Kevin Wang <dwang4@marvell.com>
   5  *              Mingwei Wang <mwwang@marvell.com>
   6  *              Philip Rakity <prakity@marvell.com>
   7  *              Mark Brown <markb@marvell.com>
   8  *
   9  * This software is licensed under the terms of the GNU General Public
  10  * License version 2, as published by the Free Software Foundation, and
  11  * may be copied, distributed, and modified under those terms.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  */
  19 #include <linux/err.h>
  20 #include <linux/init.h>
  21 #include <linux/platform_device.h>
  22 #include <linux/clk.h>
  23 #include <linux/io.h>
  24 #include <linux/gpio.h>
  25 #include <linux/mmc/card.h>
  26 #include <linux/mmc/host.h>
  27 #include <linux/mmc/slot-gpio.h>
  28 #include <linux/platform_data/pxa_sdhci.h>
  29 #include <linux/slab.h>
  30 #include <linux/delay.h>
  31 #include <linux/module.h>
  32 #include <linux/of.h>
  33 #include <linux/of_device.h>
  34 #include <linux/of_gpio.h>
  35 #include <linux/pm.h>
  36 #include <linux/pm_runtime.h>
  37 #include <linux/mbus.h>
  38
  39 #include "sdhci.h"
  40 #include "sdhci-pltfm.h"
  41
  42 #define PXAV3_RPM_DELAY_MS     50
  43
  44 #define SD_CLOCK_BURST_SIZE_SETUP               0x10A
  45 #define SDCLK_SEL       0x100
  46 #define SDCLK_DELAY_SHIFT       9
  47 #define SDCLK_DELAY_MASK        0x1f
  48
  49 #define SD_CFG_FIFO_PARAM       0x100
  50 #define SDCFG_GEN_PAD_CLK_ON    (1<<6)
  51 #define SDCFG_GEN_PAD_CLK_CNT_MASK      0xFF
  52 #define SDCFG_GEN_PAD_CLK_CNT_SHIFT     24
  53
  54 #define SD_SPI_MODE          0x108
  55 #define SD_CE_ATA_1          0x10C
  56
  57 #define SD_CE_ATA_2          0x10E
  58 #define SDCE_MISC_INT           (1<<2)
  59 #define SDCE_MISC_INT_EN        (1<<1)
  60
  61 struct sdhci_pxa {
  62         struct clk *clk_core;
  63         struct clk *clk_io;
  64         u8      power_mode;
  65         void __iomem *sdio3_conf_reg;
  66 };
  67
  68 /*
  69  * These registers are relative to the second register region, for the
  70  * MBus bridge.
  71  */
  72 #define SDHCI_WINDOW_CTRL(i)    (0x80 + ((i) << 3))
  73 #define SDHCI_WINDOW_BASE(i)    (0x84 + ((i) << 3))
  74 #define SDHCI_MAX_WIN_NUM       8
  75
  76 /*
  77  * Fields below belong to SDIO3 Configuration Register (third register
  78  * region for the Armada 38x flavor)
  79  */
  80
  81 #define SDIO3_CONF_CLK_INV      BIT(0)
  82 #define SDIO3_CONF_SD_FB_CLK    BIT(2)
  83
  84 static int mv_conf_mbus_windows(struct platform_device *pdev,
  85                                 const struct mbus_dram_target_info *dram)
  86 {
  87         int i;
  88         void __iomem *regs;
  89         struct resource *res;
  90
  91         if (!dram) {
  92                 dev_err(&pdev->dev, "no mbus dram info\n");
  93                 return -EINVAL;
  94         }
  95
  96         res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
  97         if (!res) {
  98                 dev_err(&pdev->dev, "cannot get mbus registers\n");
  99                 return -EINVAL;
 100         }
 101
 102         regs = ioremap(res->start, resource_size(res));
 103         if (!regs) {
 104                 dev_err(&pdev->dev, "cannot map mbus registers\n");
 105                 return -ENOMEM;
 106         }
 107
 108         for (i = 0; i < SDHCI_MAX_WIN_NUM; i++) {
 109                 writel(0, regs + SDHCI_WINDOW_CTRL(i));
 110                 writel(0, regs + SDHCI_WINDOW_BASE(i));
 111         }
 112
 113         for (i = 0; i < dram->num_cs; i++) {
 114                 const struct mbus_dram_window *cs = dram->cs + i;
 115
 116                 /* Write size, attributes and target id to control register */
 117                 writel(((cs->size - 1) & 0xffff0000) |
 118                         (cs->mbus_attr << 8) |
 119                         (dram->mbus_dram_target_id << 4) | 1,
 120                         regs + SDHCI_WINDOW_CTRL(i));
 121                 /* Write base address to base register */
 122                 writel(cs->base, regs + SDHCI_WINDOW_BASE(i));
 123         }
 124
 125         iounmap(regs);
 126
 127         return 0;
 128 }
 129
 130 static int armada_38x_quirks(struct platform_device *pdev,
 131                              struct sdhci_host *host)
 132 {
 133         struct device_node *np = pdev->dev.of_node;
 134         struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 135         struct sdhci_pxa *pxa = sdhci_pltfm_priv(pltfm_host);
 136         struct resource *res;
 137
 138         host->quirks &= ~SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN;
 139         host->quirks |= SDHCI_QUIRK_MISSING_CAPS;
 140
 141         host->caps = sdhci_readl(host, SDHCI_CAPABILITIES);
 142         host->caps1 = sdhci_readl(host, SDHCI_CAPABILITIES_1);
 143
 144         res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
 145                                            "conf-sdio3");
 146         if (res) {
 147                 pxa->sdio3_conf_reg = devm_ioremap_resource(&pdev->dev, res);
 148                 if (IS_ERR(pxa->sdio3_conf_reg))
 149                         return PTR_ERR(pxa->sdio3_conf_reg);
 150         } else {
 151                 /*
 152                  * According to erratum 'FE-2946959' both SDR50 and DDR50
 153                  * modes require specific clock adjustments in SDIO3
 154                  * Configuration register, if the adjustment is not done,
 155                  * remove them from the capabilities.
 156                  */
 157                 host->caps1 &= ~(SDHCI_SUPPORT_SDR50 | SDHCI_SUPPORT_DDR50);
 158
 159                 dev_warn(&pdev->dev, "conf-sdio3 register not found: disabling SDR50 and DDR50 modes.\nConsider updating your dtb\n");
 160         }
 161
 162         /*
 163          * According to erratum 'ERR-7878951' Armada 38x SDHCI
 164          * controller has different capabilities than the ones shown
 165          * in its registers
 166          */
 167         if (of_property_read_bool(np, "no-1-8-v")) {
 168                 host->caps &= ~SDHCI_CAN_VDD_180;
 169                 host->mmc->caps &= ~MMC_CAP_1_8V_DDR;
 170         } else {
 171                 host->caps &= ~SDHCI_CAN_VDD_330;
 172         }
 173         host->caps1 &= ~(SDHCI_SUPPORT_SDR104 | SDHCI_USE_SDR50_TUNING);
 174
 175         return 0;
 176 }
 177
 178 static void pxav3_reset(struct sdhci_host *host, u8 mask)
 179 {
 180         struct platform_device *pdev = to_platform_device(mmc_dev(host->mmc));
 181         struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data;
 182
 183         sdhci_reset(host, mask);
 184
 185         if (mask == SDHCI_RESET_ALL) {
 186                 /*
 187                  * tune timing of read data/command when crc error happen
 188                  * no performance impact
 189                  */
 190                 if (pdata && 0 != pdata->clk_delay_cycles) {
 191                         u16 tmp;
 192
 193                         tmp = readw(host->ioaddr + SD_CLOCK_BURST_SIZE_SETUP);
 194                         tmp |= (pdata->clk_delay_cycles & SDCLK_DELAY_MASK)
 195                                 << SDCLK_DELAY_SHIFT;
 196                         tmp |= SDCLK_SEL;
 197                         writew(tmp, host->ioaddr + SD_CLOCK_BURST_SIZE_SETUP);
 198                 }
 199         }
 200 }
 201
 202 #define MAX_WAIT_COUNT 5
 203 static void pxav3_gen_init_74_clocks(struct sdhci_host *host, u8 power_mode)
 204 {
 205         struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 206         struct sdhci_pxa *pxa = sdhci_pltfm_priv(pltfm_host);
 207         u16 tmp;
 208         int count;
 209
 210         if (pxa->power_mode == MMC_POWER_UP
 211                         && power_mode == MMC_POWER_ON) {
 212
 213                 dev_dbg(mmc_dev(host->mmc),
 214                                 "%s: slot->power_mode = %d,"
 215                                 "ios->power_mode = %d\n",
 216                                 __func__,
 217                                 pxa->power_mode,
 218                                 power_mode);
 219
 220                 /* set we want notice of when 74 clocks are sent */
 221                 tmp = readw(host->ioaddr + SD_CE_ATA_2);
 222                 tmp |= SDCE_MISC_INT_EN;
 223                 writew(tmp, host->ioaddr + SD_CE_ATA_2);
 224
 225                 /* start sending the 74 clocks */
 226                 tmp = readw(host->ioaddr + SD_CFG_FIFO_PARAM);
 227                 tmp |= SDCFG_GEN_PAD_CLK_ON;
 228                 writew(tmp, host->ioaddr + SD_CFG_FIFO_PARAM);
 229
 230                 /* slowest speed is about 100KHz or 10usec per clock */
 231                 udelay(740);
 232                 count = 0;
 233
 234                 while (count++ < MAX_WAIT_COUNT) {
 235                         if ((readw(host->ioaddr + SD_CE_ATA_2)
 236                                                 & SDCE_MISC_INT) == 0)
 237                                 break;
 238                         udelay(10);
 239                 }
 240
 241                 if (count == MAX_WAIT_COUNT)
 242                         dev_warn(mmc_dev(host->mmc), "74 clock interrupt not cleared\n");
 243
 244                 /* clear the interrupt bit if posted */
 245                 tmp = readw(host->ioaddr + SD_CE_ATA_2);
 246                 tmp |= SDCE_MISC_INT;
 247                 writew(tmp, host->ioaddr + SD_CE_ATA_2);
 248         }
 249         pxa->power_mode = power_mode;
 250 }
 251
 252 static void pxav3_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs)
 253 {
 254         struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 255         struct sdhci_pxa *pxa = sdhci_pltfm_priv(pltfm_host);
 256         u16 ctrl_2;
 257
 258         /*
 259          * Set V18_EN -- UHS modes do not work without this.
 260          * does not change signaling voltage
 261          */
 262         ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
 263
 264         /* Select Bus Speed Mode for host */
 265         ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
 266         switch (uhs) {
 267         case MMC_TIMING_UHS_SDR12:
 268                 ctrl_2 |= SDHCI_CTRL_UHS_SDR12;
 269                 break;
 270         case MMC_TIMING_UHS_SDR25:
 271                 ctrl_2 |= SDHCI_CTRL_UHS_SDR25;
 272                 break;
 273         case MMC_TIMING_UHS_SDR50:
 274                 ctrl_2 |= SDHCI_CTRL_UHS_SDR50 | SDHCI_CTRL_VDD_180;
 275                 break;
 276         case MMC_TIMING_UHS_SDR104:
 277                 ctrl_2 |= SDHCI_CTRL_UHS_SDR104 | SDHCI_CTRL_VDD_180;
 278                 break;
 279         case MMC_TIMING_MMC_DDR52:
 280         case MMC_TIMING_UHS_DDR50:
 281                 ctrl_2 |= SDHCI_CTRL_UHS_DDR50 | SDHCI_CTRL_VDD_180;
 282                 break;
 283         }
 284
 285         /*
 286          * Update SDIO3 Configuration register according to erratum
 287          * FE-2946959
 288          */
 289         if (pxa->sdio3_conf_reg) {
 290                 u8 reg_val  = readb(pxa->sdio3_conf_reg);
 291
 292                 if (uhs == MMC_TIMING_UHS_SDR50 ||
 293                     uhs == MMC_TIMING_UHS_DDR50) {
 294                         reg_val &= ~SDIO3_CONF_CLK_INV;
 295                         reg_val |= SDIO3_CONF_SD_FB_CLK;
 296                 } else if (uhs == MMC_TIMING_MMC_HS) {
 297                         reg_val &= ~SDIO3_CONF_CLK_INV;
 298                         reg_val &= ~SDIO3_CONF_SD_FB_CLK;
 299                 } else {
 300                         reg_val |= SDIO3_CONF_CLK_INV;
 301                         reg_val &= ~SDIO3_CONF_SD_FB_CLK;
 302                 }
 303                 writeb(reg_val, pxa->sdio3_conf_reg);
 304         }
 305
 306         sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
 307         dev_dbg(mmc_dev(host->mmc),
 308                 "%s uhs = %d, ctrl_2 = %04X\n",
 309                 __func__, uhs, ctrl_2);
 310 }
 311
 312 static void pxav3_set_power(struct sdhci_host *host, unsigned char mode,
 313                             unsigned short vdd)
 314 {
 315         struct mmc_host *mmc = host->mmc;
 316         u8 pwr = host->pwr;
 317
 318         sdhci_set_power(host, mode, vdd);
 319
 320         if (host->pwr == pwr)
 321                 return;
 322
 323         if (host->pwr == 0)
 324                 vdd = 0;
 325
 326         if (!IS_ERR(mmc->supply.vmmc)) {
 327                 spin_unlock_irq(&host->lock);
 328                 mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
 329                 spin_lock_irq(&host->lock);
 330         }
 331 }
 332
 333 static const struct sdhci_ops pxav3_sdhci_ops = {
 334         .set_clock = sdhci_set_clock,
 335         .set_power = pxav3_set_power,
 336         .platform_send_init_74_clocks = pxav3_gen_init_74_clocks,
 337         .get_max_clock = sdhci_pltfm_clk_get_max_clock,
 338         .set_bus_width = sdhci_set_bus_width,
 339         .reset = pxav3_reset,
 340         .set_uhs_signaling = pxav3_set_uhs_signaling,
 341 };
 342
 343 static struct sdhci_pltfm_data sdhci_pxav3_pdata = {
 344         .quirks = SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK
 345                 | SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC
 346                 | SDHCI_QUIRK_32BIT_ADMA_SIZE
 347                 | SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
 348         .ops = &pxav3_sdhci_ops,
 349 };
 350
 351 #ifdef CONFIG_OF
 352 static const struct of_device_id sdhci_pxav3_of_match[] = {
 353         {
 354                 .compatible = "mrvl,pxav3-mmc",
 355         },
 356         {
 357                 .compatible = "marvell,armada-380-sdhci",
 358         },
 359         {},
 360 };
 361 MODULE_DEVICE_TABLE(of, sdhci_pxav3_of_match);
 362
 363 static struct sdhci_pxa_platdata *pxav3_get_mmc_pdata(struct device *dev)
 364 {
 365         struct sdhci_pxa_platdata *pdata;
 366         struct device_node *np = dev->of_node;
 367         u32 clk_delay_cycles;
 368
 369         pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
 370         if (!pdata)
 371                 return NULL;
 372
 373         if (!of_property_read_u32(np, "mrvl,clk-delay-cycles",
 374                                   &clk_delay_cycles))
 375                 pdata->clk_delay_cycles = clk_delay_cycles;
 376
 377         return pdata;
 378 }
 379 #else
 380 static inline struct sdhci_pxa_platdata *pxav3_get_mmc_pdata(struct device *dev)
 381 {
 382         return NULL;
 383 }
 384 #endif
 385
 386 static int sdhci_pxav3_probe(struct platform_device *pdev)
 387 {
 388         struct sdhci_pltfm_host *pltfm_host;
 389         struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data;
 390         struct device *dev = &pdev->dev;
 391         struct device_node *np = pdev->dev.of_node;
 392         struct sdhci_host *host = NULL;
 393         struct sdhci_pxa *pxa = NULL;
 394         const struct of_device_id *match;
 395         int ret;
 396
 397         host = sdhci_pltfm_init(pdev, &sdhci_pxav3_pdata, sizeof(*pxa));
 398         if (IS_ERR(host))
 399                 return PTR_ERR(host);
 400
 401         pltfm_host = sdhci_priv(host);
 402         pxa = sdhci_pltfm_priv(pltfm_host);
 403
 404         pxa->clk_io = devm_clk_get(dev, "io");
 405         if (IS_ERR(pxa->clk_io))
 406                 pxa->clk_io = devm_clk_get(dev, NULL);
 407         if (IS_ERR(pxa->clk_io)) {
 408                 dev_err(dev, "failed to get io clock\n");
 409                 ret = PTR_ERR(pxa->clk_io);
 410                 goto err_clk_get;
 411         }
 412         pltfm_host->clk = pxa->clk_io;
 413         clk_prepare_enable(pxa->clk_io);
 414
 415         pxa->clk_core = devm_clk_get(dev, "core");
 416         if (!IS_ERR(pxa->clk_core))
 417                 clk_prepare_enable(pxa->clk_core);
 418
 419         /* enable 1/8V DDR capable */
 420         host->mmc->caps |= MMC_CAP_1_8V_DDR;
 421
 422         if (of_device_is_compatible(np, "marvell,armada-380-sdhci")) {
 423                 ret = armada_38x_quirks(pdev, host);
 424                 if (ret < 0)
 425                         goto err_mbus_win;
 426                 ret = mv_conf_mbus_windows(pdev, mv_mbus_dram_info());
 427                 if (ret < 0)
 428                         goto err_mbus_win;
 429         }
 430
 431         match = of_match_device(of_match_ptr(sdhci_pxav3_of_match), &pdev->dev);
 432         if (match) {
 433                 ret = mmc_of_parse(host->mmc);
 434                 if (ret)
 435                         goto err_of_parse;
 436                 sdhci_get_of_property(pdev);
 437                 pdata = pxav3_get_mmc_pdata(dev);
 438                 pdev->dev.platform_data = pdata;
 439         } else if (pdata) {
 440                 /* on-chip device */
 441                 if (pdata->flags & PXA_FLAG_CARD_PERMANENT)
 442                         host->mmc->caps |= MMC_CAP_NONREMOVABLE;
 443
 444                 /* If slot design supports 8 bit data, indicate this to MMC. */
 445                 if (pdata->flags & PXA_FLAG_SD_8_BIT_CAPABLE_SLOT)
 446                         host->mmc->caps |= MMC_CAP_8_BIT_DATA;
 447
 448                 if (pdata->quirks)
 449                         host->quirks |= pdata->quirks;
 450                 if (pdata->quirks2)
 451                         host->quirks2 |= pdata->quirks2;
 452                 if (pdata->host_caps)
 453                         host->mmc->caps |= pdata->host_caps;
 454                 if (pdata->host_caps2)
 455                         host->mmc->caps2 |= pdata->host_caps2;
 456                 if (pdata->pm_caps)
 457                         host->mmc->pm_caps |= pdata->pm_caps;
 458
 459                 if (gpio_is_valid(pdata->ext_cd_gpio)) {
 460                         ret = mmc_gpio_request_cd(host->mmc, pdata->ext_cd_gpio,
 461                                                   0);
 462                         if (ret) {
 463                                 dev_err(mmc_dev(host->mmc),
 464                                         "failed to allocate card detect gpio\n");
 465                                 goto err_cd_req;
 466                         }
 467                 }
 468         }
 469
 470         pm_runtime_get_noresume(&pdev->dev);
 471         pm_runtime_set_active(&pdev->dev);
 472         pm_runtime_set_autosuspend_delay(&pdev->dev, PXAV3_RPM_DELAY_MS);
 473         pm_runtime_use_autosuspend(&pdev->dev);
 474         pm_runtime_enable(&pdev->dev);
 475         pm_suspend_ignore_children(&pdev->dev, 1);
 476
 477         ret = sdhci_add_host(host);
 478         if (ret) {
 479                 dev_err(&pdev->dev, "failed to add host\n");
 480                 goto err_add_host;
 481         }
 482
 483         platform_set_drvdata(pdev, host);
 484
 485         if (host->mmc->pm_caps & MMC_PM_WAKE_SDIO_IRQ)
 486                 device_init_wakeup(&pdev->dev, 1);
 487
 488         pm_runtime_put_autosuspend(&pdev->dev);
 489
 490         return 0;
 491
 492 err_add_host:
 493         pm_runtime_disable(&pdev->dev);
 494         pm_runtime_put_noidle(&pdev->dev);
 495 err_of_parse:
 496 err_cd_req:
 497 err_mbus_win:
 498         clk_disable_unprepare(pxa->clk_io);
 499         clk_disable_unprepare(pxa->clk_core);
 500 err_clk_get:
 501         sdhci_pltfm_free(pdev);
 502         return ret;
 503 }
 504
 505 static int sdhci_pxav3_remove(struct platform_device *pdev)
 506 {
 507         struct sdhci_host *host = platform_get_drvdata(pdev);
 508         struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 509         struct sdhci_pxa *pxa = sdhci_pltfm_priv(pltfm_host);
 510
 511         pm_runtime_get_sync(&pdev->dev);
 512         pm_runtime_disable(&pdev->dev);
 513         pm_runtime_put_noidle(&pdev->dev);
 514
 515         sdhci_remove_host(host, 1);
 516
 517         clk_disable_unprepare(pxa->clk_io);
 518         clk_disable_unprepare(pxa->clk_core);
 519
 520         sdhci_pltfm_free(pdev);
 521
 522         return 0;
 523 }
 524
 525 #ifdef CONFIG_PM_SLEEP
 526 static int sdhci_pxav3_suspend(struct device *dev)
 527 {
 528         int ret;
 529         struct sdhci_host *host = dev_get_drvdata(dev);
 530
 531         pm_runtime_get_sync(dev);
 532         ret = sdhci_suspend_host(host);
 533         pm_runtime_mark_last_busy(dev);
 534         pm_runtime_put_autosuspend(dev);
 535
 536         return ret;
 537 }
 538
 539 static int sdhci_pxav3_resume(struct device *dev)
 540 {
 541         int ret;
 542         struct sdhci_host *host = dev_get_drvdata(dev);
 543
 544         pm_runtime_get_sync(dev);
 545         ret = sdhci_resume_host(host);
 546         pm_runtime_mark_last_busy(dev);
 547         pm_runtime_put_autosuspend(dev);
 548
 549         return ret;
 550 }
 551 #endif
 552
 553 #ifdef CONFIG_PM
 554 static int sdhci_pxav3_runtime_suspend(struct device *dev)
 555 {
 556         struct sdhci_host *host = dev_get_drvdata(dev);
 557         struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 558         struct sdhci_pxa *pxa = sdhci_pltfm_priv(pltfm_host);
 559         int ret;
 560
 561         ret = sdhci_runtime_suspend_host(host);
 562         if (ret)
 563                 return ret;
 564
 565         clk_disable_unprepare(pxa->clk_io);
 566         if (!IS_ERR(pxa->clk_core))
 567                 clk_disable_unprepare(pxa->clk_core);
 568
 569         return 0;
 570 }
 571
 572 static int sdhci_pxav3_runtime_resume(struct device *dev)
 573 {
 574         struct sdhci_host *host = dev_get_drvdata(dev);
 575         struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 576         struct sdhci_pxa *pxa = sdhci_pltfm_priv(pltfm_host);
 577
 578         clk_prepare_enable(pxa->clk_io);
 579         if (!IS_ERR(pxa->clk_core))
 580                 clk_prepare_enable(pxa->clk_core);
 581
 582         return sdhci_runtime_resume_host(host);
 583 }
 584 #endif
 585
 586 static const struct dev_pm_ops sdhci_pxav3_pmops = {
 587         SET_SYSTEM_SLEEP_PM_OPS(sdhci_pxav3_suspend, sdhci_pxav3_resume)
 588         SET_RUNTIME_PM_OPS(sdhci_pxav3_runtime_suspend,
 589                 sdhci_pxav3_runtime_resume, NULL)
 590 };
 591
 592 static struct platform_driver sdhci_pxav3_driver = {
 593         .driver         = {
 594                 .name   = "sdhci-pxav3",
 595                 .of_match_table = of_match_ptr(sdhci_pxav3_of_match),
 596                 .pm     = &sdhci_pxav3_pmops,
 597         },
 598         .probe          = sdhci_pxav3_probe,
 599         .remove         = sdhci_pxav3_remove,
 600 };
 601
 602 module_platform_driver(sdhci_pxav3_driver);
 603
 604 MODULE_DESCRIPTION("SDHCI driver for pxav3");
 605 MODULE_AUTHOR("Marvell International Ltd.");
 606 MODULE_LICENSE("GPL v2");
 607