Merge tag 'uniphier-fixes-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git...

UniPhier ARM SoC fixes for v4.9

- Add "select ARCH_HAS_RESET_CONTROLLER" in Kconfig
- Rename wrongly-named mioctrl to sdctrl

* tag 'uniphier-fixes-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
  arm64: dts: uniphier: change MIO node to SD control node
  ARM: dts: uniphier: change MIO node to SD control node
  reset: uniphier: rename MIO reset to SD reset for Pro5, PXs2, LD20 SoCs
  arm64: uniphier: select ARCH_HAS_RESET_CONTROLLER
  ARM: uniphier: select ARCH_HAS_RESET_CONTROLLER

Signed-off-by: Olof Johansson <olof@lixom.net>

diff --git a/MAINTAINERS b/MAINTAINERS
index 1cd38a7..25f543c 100644 (file)
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1442,6 +1442,7 @@ F:        drivers/cpufreq/mvebu-cpufreq.c
 F:     arch/arm/configs/mvebu_*_defconfig
 
 ARM/Marvell Berlin SoC support
+M:     Jisheng Zhang <jszhang@marvell.com>
 M:     Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
 L:     linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:     Maintained

diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index b3df1c6..386eee6 100644 (file)
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -239,14 +239,25 @@
                        arm,primecell-periphid = <0x10480180>;
                        max-frequency = <100000000>;
                        bus-width = <4>;
+                       cap-sd-highspeed;
                        cap-mmc-highspeed;
+                       sd-uhs-sdr12;
+                       sd-uhs-sdr25;
+                       /* All direction control is used */
+                       st,sig-dir-cmd;
+                       st,sig-dir-dat0;
+                       st,sig-dir-dat2;
+                       st,sig-dir-dat31;
+                       st,sig-pin-fbclk;
+                       full-pwr-cycle;
                        vmmc-supply = <&ab8500_ldo_aux3_reg>;
                        vqmmc-supply = <&vmmci>;
                        pinctrl-names = "default", "sleep";
                        pinctrl-0 = <&sdi0_default_mode>;
                        pinctrl-1 = <&sdi0_sleep_mode>;
 
-                       cd-gpios  = <&gpio6 26 GPIO_ACTIVE_LOW>; // 218
+                       /* GPIO218 MMC_CD */
+                       cd-gpios  = <&gpio6 26 GPIO_ACTIVE_LOW>;
 
                        status = "okay";
                };
@@ -549,7 +560,7 @@
                                        /* VMMCI level-shifter enable */
                                        snowball_cfg3 {
                                                pins = "GPIO217_AH12";
-                                               ste,config = <&gpio_out_lo>;
+                                               ste,config = <&gpio_out_hi>;
                                        };
                                        /* VMMCI level-shifter voltage select */
                                        snowball_cfg4 {

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 437d074..11f37ed 100644 (file)
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -850,6 +850,7 @@ CONFIG_PWM_SUN4I=y
 CONFIG_PWM_TEGRA=y
 CONFIG_PWM_VT8500=y
 CONFIG_PHY_HIX5HD2_SATA=y
+CONFIG_E1000E=y
 CONFIG_PWM_STI=y
 CONFIG_PWM_BCM2835=y
 CONFIG_PWM_BRCMSTB=m

diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index f9b6bd3..541647f 100644 (file)
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -23,6 +23,7 @@ config MACH_MVEBU_V7
        select CACHE_L2X0
        select ARM_CPU_SUSPEND
        select MACH_MVEBU_ANY
+       select MVEBU_CLK_COREDIV
 
 config MACH_ARMADA_370
        bool "Marvell Armada 370 boards"
@@ -32,7 +33,6 @@ config MACH_ARMADA_370
        select CPU_PJ4B
        select MACH_MVEBU_V7
        select PINCTRL_ARMADA_370
-       select MVEBU_CLK_COREDIV
        help
          Say 'Y' here if you want your kernel to support boards based
          on the Marvell Armada 370 SoC with device tree.
@@ -50,7 +50,6 @@ config MACH_ARMADA_375
        select HAVE_SMP
        select MACH_MVEBU_V7
        select PINCTRL_ARMADA_375
-       select MVEBU_CLK_COREDIV
        help
          Say 'Y' here if you want your kernel to support boards based
          on the Marvell Armada 375 SoC with device tree.
@@ -68,7 +67,6 @@ config MACH_ARMADA_38X
        select HAVE_SMP
        select MACH_MVEBU_V7
        select PINCTRL_ARMADA_38X
-       select MVEBU_CLK_COREDIV
        help
          Say 'Y' here if you want your kernel to support boards based
          on the Marvell Armada 380/385 SoC with device tree.

diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
index e5e3ed6..602e2c2 100644 (file)
--- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
@@ -131,7 +131,7 @@
                                #address-cells = <0x1>;
                                #size-cells = <0x0>;
                                cell-index = <1>;
-                               clocks = <&cpm_syscon0 0 3>;
+                               clocks = <&cpm_syscon0 1 21>;
                                status = "disabled";
                        };
 

diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
index 7010dca..7875105 100644 (file)
--- a/drivers/bus/Kconfig
+++ b/drivers/bus/Kconfig
@@ -111,6 +111,7 @@ config OMAP_OCP2SCP
 config QCOM_EBI2
        bool "Qualcomm External Bus Interface 2 (EBI2)"
        depends on HAS_IOMEM
+       depends on ARCH_QCOM || COMPILE_TEST
        help
          Say y here to enable support for the Qualcomm External Bus
          Interface 2, which can be used to connect things like NAND Flash,