void t4_idma_monitor(struct adapter *adapter,
struct sge_idma_monitor_state *idma,
int hz, int ticks);
+int t4_set_vf_mac_acl(struct adapter *adapter, unsigned int vf,
+ unsigned int naddr, u8 *addr);
+
#endif /* __CXGB4_H__ */
return ret;
}
+#ifdef CONFIG_PCI_IOV
+static int cxgb_set_vf_mac(struct net_device *dev, int vf, u8 *mac)
+{
+ struct port_info *pi = netdev_priv(dev);
+ struct adapter *adap = pi->adapter;
+
+ /* verify MAC addr is valid */
+ if (!is_valid_ether_addr(mac)) {
+ dev_err(pi->adapter->pdev_dev,
+ "Invalid Ethernet address %pM for VF %d\n",
+ mac, vf);
+ return -EINVAL;
+ }
+
+ dev_info(pi->adapter->pdev_dev,
+ "Setting MAC %pM on VF %d\n", mac, vf);
+ return t4_set_vf_mac_acl(adap, vf + 1, 1, mac);
+}
+#endif
+
static int cxgb_set_mac_addr(struct net_device *dev, void *p)
{
int ret;
#ifdef CONFIG_NET_RX_BUSY_POLL
.ndo_busy_poll = cxgb_busy_poll,
#endif
-
};
static const struct net_device_ops cxgb4_mgmt_netdev_ops = {
+#ifdef CONFIG_PCI_IOV
+ .ndo_set_vf_mac = cxgb_set_vf_mac,
+#endif
};
static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
t4_sge_decode_idma_state(adapter, idma->idma_state[i]);
}
}
+
+/**
+ * t4_set_vf_mac - Set MAC address for the specified VF
+ * @adapter: The adapter
+ * @vf: one of the VFs instantiated by the specified PF
+ * @naddr: the number of MAC addresses
+ * @addr: the MAC address(es) to be set to the specified VF
+ */
+int t4_set_vf_mac_acl(struct adapter *adapter, unsigned int vf,
+ unsigned int naddr, u8 *addr)
+{
+ struct fw_acl_mac_cmd cmd;
+
+ memset(&cmd, 0, sizeof(cmd));
+ cmd.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_ACL_MAC_CMD) |
+ FW_CMD_REQUEST_F |
+ FW_CMD_WRITE_F |
+ FW_ACL_MAC_CMD_PFN_V(adapter->pf) |
+ FW_ACL_MAC_CMD_VFN_V(vf));
+
+ /* Note: Do not enable the ACL */
+ cmd.en_to_len16 = cpu_to_be32((unsigned int)FW_LEN16(cmd));
+ cmd.nmac = naddr;
+
+ switch (adapter->pf) {
+ case 3:
+ memcpy(cmd.macaddr3, addr, sizeof(cmd.macaddr3));
+ break;
+ case 2:
+ memcpy(cmd.macaddr2, addr, sizeof(cmd.macaddr2));
+ break;
+ case 1:
+ memcpy(cmd.macaddr1, addr, sizeof(cmd.macaddr1));
+ break;
+ case 0:
+ memcpy(cmd.macaddr0, addr, sizeof(cmd.macaddr0));
+ break;
+ }
+
+ return t4_wr_mbox(adapter, adapter->mbox, &cmd, sizeof(cmd), &cmd);
+}
struct adapter *adapter;
struct port_info *pi;
struct net_device *netdev;
+ unsigned int pf;
/*
* Print our driver banner the first time we're called to initialize a
* Allocate our "adapter ports" and stitch everything together.
*/
pmask = adapter->params.vfres.pmask;
+ pf = t4vf_get_pf_from_vf(adapter);
for_each_port(adapter, pidx) {
int port_id, viid;
+ u8 mac[ETH_ALEN];
+ unsigned int naddr = 1;
/*
* We simplistically allocate our virtual interfaces
pidx);
goto err_free_dev;
}
+
+ err = t4vf_get_vf_mac_acl(adapter, pf, &naddr, mac);
+ if (err) {
+ dev_err(&pdev->dev,
+ "unable to determine MAC ACL address, "
+ "continuing anyway.. (status %d)\n", err);
+ } else if (naddr && adapter->params.vfres.nvi == 1) {
+ struct sockaddr addr;
+
+ ether_addr_copy(addr.sa_data, mac);
+ err = cxgb4vf_set_mac_addr(netdev, &addr);
+ if (err) {
+ dev_err(&pdev->dev,
+ "unable to set MAC address %pM\n",
+ mac);
+ goto err_free_dev;
+ }
+ dev_info(&pdev->dev,
+ "Using assigned MAC ACL: %pM\n", mac);
+ }
}
/* See what interrupts we'll be using. If we've been configured to
u64 *pbar2_qoffset,
unsigned int *pbar2_qid);
+unsigned int t4vf_get_pf_from_vf(struct adapter *);
int t4vf_get_sge_params(struct adapter *);
int t4vf_get_vpd_params(struct adapter *);
int t4vf_get_dev_params(struct adapter *);
int t4vf_handle_fw_rpl(struct adapter *, const __be64 *);
int t4vf_prep_adapter(struct adapter *);
+int t4vf_get_vf_mac_acl(struct adapter *adapter, unsigned int pf,
+ unsigned int *naddr, u8 *addr);
#endif /* __T4VF_COMMON_H__ */
return 0;
}
+unsigned int t4vf_get_pf_from_vf(struct adapter *adapter)
+{
+ u32 whoami;
+
+ whoami = t4_read_reg(adapter, T4VF_PL_BASE_ADDR + PL_VF_WHOAMI_A);
+ return (CHELSIO_CHIP_VERSION(adapter->params.chip) <= CHELSIO_T5 ?
+ SOURCEPF_G(whoami) : T6_SOURCEPF_G(whoami));
+}
+
/**
* t4vf_get_sge_params - retrieve adapter Scatter gather Engine parameters
* @adapter: the adapter
* read.
*/
if (!is_t4(adapter->params.chip)) {
- u32 whoami;
unsigned int pf, s_hps, s_qpp;
params[0] = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_REG) |
* register we just read. Do it once here so other code in
* the driver can just use it.
*/
- whoami = t4_read_reg(adapter,
- T4VF_PL_BASE_ADDR + PL_VF_WHOAMI_A);
- pf = CHELSIO_CHIP_VERSION(adapter->params.chip) <= CHELSIO_T5 ?
- SOURCEPF_G(whoami) : T6_SOURCEPF_G(whoami);
-
+ pf = t4vf_get_pf_from_vf(adapter);
s_hps = (HOSTPAGESIZEPF0_S +
(HOSTPAGESIZEPF1_S - HOSTPAGESIZEPF0_S) * pf);
sge_params->sge_vf_hps =
return 0;
}
+
+/**
+ * t4vf_get_vf_mac_acl - Get the MAC address to be set to
+ * the VI of this VF.
+ * @adapter: The adapter
+ * @pf: The pf associated with vf
+ * @naddr: the number of ACL MAC addresses returned in addr
+ * @addr: Placeholder for MAC addresses
+ *
+ * Find the MAC address to be set to the VF's VI. The requested MAC address
+ * is from the host OS via callback in the PF driver.
+ */
+int t4vf_get_vf_mac_acl(struct adapter *adapter, unsigned int pf,
+ unsigned int *naddr, u8 *addr)
+{
+ struct fw_acl_mac_cmd cmd;
+ int ret;
+
+ memset(&cmd, 0, sizeof(cmd));
+ cmd.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_ACL_MAC_CMD) |
+ FW_CMD_REQUEST_F |
+ FW_CMD_READ_F);
+ cmd.en_to_len16 = cpu_to_be32((unsigned int)FW_LEN16(cmd));
+ ret = t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), &cmd);
+ if (ret)
+ return ret;
+
+ if (cmd.nmac < *naddr)
+ *naddr = cmd.nmac;
+
+ switch (pf) {
+ case 3:
+ memcpy(addr, cmd.macaddr3, sizeof(cmd.macaddr3));
+ break;
+ case 2:
+ memcpy(addr, cmd.macaddr2, sizeof(cmd.macaddr2));
+ break;
+ case 1:
+ memcpy(addr, cmd.macaddr1, sizeof(cmd.macaddr1));
+ break;
+ case 0:
+ memcpy(addr, cmd.macaddr0, sizeof(cmd.macaddr0));
+ break;
+ }
+
+ return ret;
+}
projects / cascardo / linux.git / commitdiff