arm64: dts: Add dts files for LG Electronics's lg1313 SoC
authorChanho Min <chanho.min@lge.com>
Wed, 1 Jun 2016 01:39:58 +0000 (10:39 +0900)
committerOlof Johansson <olof@lixom.net>
Fri, 3 Jun 2016 19:21:54 +0000 (12:21 -0700)
Add dtsi file to support lg1313 SoC which based on Cortex-A53.
Also add dts file to support lg1312 reference board which based
on lg1313 SoC.

Signed-off-by: Chanho Min <chanho.min@lge.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
arch/arm64/boot/dts/lg/Makefile
arch/arm64/boot/dts/lg/lg1313-ref.dts [new file with mode: 0644]
arch/arm64/boot/dts/lg/lg1313.dtsi [new file with mode: 0644]

index b0cc649..5c7b54c 100644 (file)
@@ -1,4 +1,5 @@
 dtb-$(CONFIG_ARCH_LG1K) += lg1312-ref.dtb
+dtb-$(CONFIG_ARCH_LG1K) += lg1313-ref.dtb
 
 always         := $(dtb-y)
 subdir-y       := $(dts-dirs)
diff --git a/arch/arm64/boot/dts/lg/lg1313-ref.dts b/arch/arm64/boot/dts/lg/lg1313-ref.dts
new file mode 100644 (file)
index 0000000..df0ece4
--- /dev/null
@@ -0,0 +1,36 @@
+/*
+ * dts file for lg1313 Reference Board.
+ *
+ * Copyright (C) 2016, LG Electronics
+ */
+
+/dts-v1/;
+
+#include "lg1313.dtsi"
+
+/ {
+       #address-cells = <2>;
+       #size-cells = <1>;
+
+       model = "LG Electronics, DTV SoC LG1313 Reference Board";
+       compatible = "lge,lg1313-ref", "lge,lg1313";
+
+       aliases {
+               serial0 = &uart0;
+               serial1 = &uart1;
+               serial2 = &uart2;
+       };
+
+       memory {
+               device_type = "memory";
+               reg = <0x0 0x00000000 0x20000000>;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+};
+
+&uart0 {
+       status = "okay";
+};
diff --git a/arch/arm64/boot/dts/lg/lg1313.dtsi b/arch/arm64/boot/dts/lg/lg1313.dtsi
new file mode 100644 (file)
index 0000000..e703e11
--- /dev/null
@@ -0,0 +1,351 @@
+/*
+ * dts file for lg1313 SoC
+ *
+ * Copyright (C) 2016, LG Electronics
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+       #address-cells = <2>;
+       #size-cells = <2>;
+
+       compatible = "lge,lg1313";
+       interrupt-parent = <&gic>;
+
+       cpus {
+               #address-cells = <2>;
+               #size-cells = <0>;
+
+               cpu0: cpu@0 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a53", "arm,armv8";
+                       reg = <0x0 0x0>;
+                       next-level-cache = <&L2_0>;
+               };
+               cpu1: cpu@1 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a53", "arm,armv8";
+                       reg = <0x0 0x1>;
+                       enable-method = "psci";
+                       next-level-cache = <&L2_0>;
+               };
+               cpu2: cpu@2 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a53", "arm,armv8";
+                       reg = <0x0 0x2>;
+                       enable-method = "psci";
+                       next-level-cache = <&L2_0>;
+               };
+               cpu3: cpu@3 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a53", "arm,armv8";
+                       reg = <0x0 0x3>;
+                       enable-method = "psci";
+                       next-level-cache = <&L2_0>;
+               };
+               L2_0: l2-cache0 {
+                       compatible = "cache";
+               };
+       };
+
+       psci {
+               compatible  = "arm,psci-0.2", "arm,psci";
+               method = "smc";
+               cpu_suspend = <0x84000001>;
+               cpu_off = <0x84000002>;
+               cpu_on = <0x84000003>;
+       };
+
+       gic: interrupt-controller@c0001000 {
+               #interrupt-cells = <3>;
+               compatible = "arm,gic-400";
+               interrupt-controller;
+               reg = <0x0 0xc0001000 0x1000>,
+                     <0x0 0xc0002000 0x2000>,
+                     <0x0 0xc0004000 0x2000>,
+                     <0x0 0xc0006000 0x2000>;
+       };
+
+       pmu {
+               compatible = "arm,cortex-a53-pmu";
+               interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+                            <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+                            <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+                            <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+               interrupt-affinity = <&cpu0>,
+                                    <&cpu1>,
+                                    <&cpu2>,
+                                    <&cpu3>;
+       };
+
+       timer {
+               compatible = "arm,armv8-timer";
+               interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0x0f) |
+                             IRQ_TYPE_LEVEL_LOW)>,
+                            <GIC_PPI 14 (GIC_CPU_MASK_RAW(0x0f) |
+                             IRQ_TYPE_LEVEL_LOW)>,
+                            <GIC_PPI 11 (GIC_CPU_MASK_RAW(0x0f) |
+                             IRQ_TYPE_LEVEL_LOW)>,
+                            <GIC_PPI 10 (GIC_CPU_MASK_RAW(0x0f) |
+                             IRQ_TYPE_LEVEL_LOW)>;
+       };
+
+       clk_bus: clk_bus {
+               #clock-cells = <0>;
+
+               compatible = "fixed-clock";
+               clock-frequency = <198000000>;
+               clock-output-names = "BUSCLK";
+       };
+
+       soc {
+               #address-cells = <2>;
+               #size-cells = <1>;
+
+               compatible = "simple-bus";
+               interrupt-parent = <&gic>;
+               ranges;
+
+               eth0: ethernet@c3700000 {
+                       compatible = "cdns,gem";
+                       reg = <0x0 0xc3700000 0x1000>;
+                       interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&clk_bus>, <&clk_bus>;
+                       clock-names = "hclk", "pclk";
+                       phy-mode = "rmii";
+                       /* Filled in by boot */
+                       mac-address = [ 00 00 00 00 00 00 ];
+               };
+       };
+
+       amba {
+               #address-cells = <2>;
+               #size-cells = <1>;
+               #interrupts-cells = <3>;
+
+               compatible = "simple-bus";
+               interrupt-parent = <&gic>;
+               ranges;
+
+               timers: timer@fd100000 {
+                       compatible = "arm,sp804";
+                       reg = <0x0 0xfd100000 0x1000>;
+                       interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&clk_bus>;
+                       clock-names = "apb_pclk";
+               };
+               wdog: watchdog@fd200000 {
+                       compatible = "arm,sp805", "arm,primecell";
+                       reg = <0x0 0xfd200000 0x1000>;
+                       interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&clk_bus>;
+                       clock-names = "apb_pclk";
+               };
+               uart0: serial@fe000000 {
+                       compatible = "arm,pl011", "arm,primecell";
+                       reg = <0x0 0xfe000000 0x1000>;
+                       interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&clk_bus>;
+                       clock-names = "apb_pclk";
+                       status="disabled";
+               };
+               uart1: serial@fe100000 {
+                       compatible = "arm,pl011", "arm,primecell";
+                       reg = <0x0 0xfe100000 0x1000>;
+                       interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&clk_bus>;
+                       clock-names = "apb_pclk";
+                       status="disabled";
+               };
+               uart2: serial@fe200000 {
+                       compatible = "arm,pl011", "arm,primecell";
+                       reg = <0x0 0xfe200000 0x1000>;
+                       interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&clk_bus>;
+                       clock-names = "apb_pclk";
+                       status="disabled";
+               };
+               spi0: ssp@fe800000 {
+                       compatible = "arm,pl022", "arm,primecell";
+                       reg = <0x0 0xfe800000 0x1000>;
+                       interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&clk_bus>;
+                       clock-names = "apb_pclk";
+               };
+               spi1: ssp@fe900000 {
+                       compatible = "arm,pl022", "arm,primecell";
+                       reg = <0x0 0xfe900000 0x1000>;
+                       interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&clk_bus>;
+                       clock-names = "apb_pclk";
+               };
+               dmac0: dma@c1128000 {
+                       compatible = "arm,pl330", "arm,primecell";
+                       reg = <0x0 0xc1128000 0x1000>;
+                       interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&clk_bus>;
+                       clock-names = "apb_pclk";
+               };
+               gpio0: gpio@fd400000 {
+                       #gpio-cells = <2>;
+                       compatible = "arm,pl061", "arm,primecell";
+                       gpio-controller;
+                       reg = <0x0 0xfd400000 0x1000>;
+                       clocks = <&clk_bus>;
+                       clock-names = "apb_pclk";
+                       status="disabled";
+               };
+               gpio1: gpio@fd410000 {
+                       #gpio-cells = <2>;
+                       compatible = "arm,pl061", "arm,primecell";
+                       gpio-controller;
+                       reg = <0x0 0xfd410000 0x1000>;
+                       clocks = <&clk_bus>;
+                       clock-names = "apb_pclk";
+                       status="disabled";
+               };
+               gpio2: gpio@fd420000 {
+                       #gpio-cells = <2>;
+                       compatible = "arm,pl061", "arm,primecell";
+                       gpio-controller;
+                       reg = <0x0 0xfd420000 0x1000>;
+                       clocks = <&clk_bus>;
+                       clock-names = "apb_pclk";
+                       status="disabled";
+               };
+               gpio3: gpio@fd430000 {
+                       #gpio-cells = <2>;
+                       compatible = "arm,pl061", "arm,primecell";
+                       gpio-controller;
+                       reg = <0x0 0xfd430000 0x1000>;
+                       clocks = <&clk_bus>;
+                       clock-names = "apb_pclk";
+               };
+               gpio4: gpio@fd440000 {
+                       #gpio-cells = <2>;
+                       compatible = "arm,pl061", "arm,primecell";
+                       gpio-controller;
+                       reg = <0x0 0xfd440000 0x1000>;
+                       clocks = <&clk_bus>;
+                       clock-names = "apb_pclk";
+                       status="disabled";
+               };
+               gpio5: gpio@fd450000 {
+                       #gpio-cells = <2>;
+                       compatible = "arm,pl061", "arm,primecell";
+                       gpio-controller;
+                       reg = <0x0 0xfd450000 0x1000>;
+                       clocks = <&clk_bus>;
+                       clock-names = "apb_pclk";
+                       status="disabled";
+               };
+               gpio6: gpio@fd460000 {
+                       #gpio-cells = <2>;
+                       compatible = "arm,pl061", "arm,primecell";
+                       gpio-controller;
+                       reg = <0x0 0xfd460000 0x1000>;
+                       clocks = <&clk_bus>;
+                       clock-names = "apb_pclk";
+                       status="disabled";
+               };
+               gpio7: gpio@fd470000 {
+                       #gpio-cells = <2>;
+                       compatible = "arm,pl061", "arm,primecell";
+                       gpio-controller;
+                       reg = <0x0 0xfd470000 0x1000>;
+                       clocks = <&clk_bus>;
+                       clock-names = "apb_pclk";
+                       status="disabled";
+               };
+               gpio8: gpio@fd480000 {
+                       #gpio-cells = <2>;
+                       compatible = "arm,pl061", "arm,primecell";
+                       gpio-controller;
+                       reg = <0x0 0xfd480000 0x1000>;
+                       clocks = <&clk_bus>;
+                       clock-names = "apb_pclk";
+                       status="disabled";
+               };
+               gpio9: gpio@fd490000 {
+                       #gpio-cells = <2>;
+                       compatible = "arm,pl061", "arm,primecell";
+                       gpio-controller;
+                       reg = <0x0 0xfd490000 0x1000>;
+                       clocks = <&clk_bus>;
+                       clock-names = "apb_pclk";
+                       status="disabled";
+               };
+               gpio10: gpio@fd4a0000 {
+                       #gpio-cells = <2>;
+                       compatible = "arm,pl061", "arm,primecell";
+                       gpio-controller;
+                       reg = <0x0 0xfd4a0000 0x1000>;
+                       clocks = <&clk_bus>;
+                       clock-names = "apb_pclk";
+                       status="disabled";
+               };
+               gpio11: gpio@fd4b0000 {
+                       #gpio-cells = <2>;
+                       compatible = "arm,pl061", "arm,primecell";
+                       gpio-controller;
+                       reg = <0x0 0xfd4b0000 0x1000>;
+                       clocks = <&clk_bus>;
+                       clock-names = "apb_pclk";
+               };
+               gpio12: gpio@fd4c0000 {
+                       #gpio-cells = <2>;
+                       compatible = "arm,pl061", "arm,primecell";
+                       gpio-controller;
+                       reg = <0x0 0xfd4c0000 0x1000>;
+                       clocks = <&clk_bus>;
+                       clock-names = "apb_pclk";
+                       status="disabled";
+               };
+               gpio13: gpio@fd4d0000 {
+                       #gpio-cells = <2>;
+                       compatible = "arm,pl061", "arm,primecell";
+                       gpio-controller;
+                       reg = <0x0 0xfd4d0000 0x1000>;
+                       clocks = <&clk_bus>;
+                       clock-names = "apb_pclk";
+                       status="disabled";
+               };
+               gpio14: gpio@fd4e0000 {
+                       #gpio-cells = <2>;
+                       compatible = "arm,pl061", "arm,primecell";
+                       gpio-controller;
+                       reg = <0x0 0xfd4e0000 0x1000>;
+                       clocks = <&clk_bus>;
+                       clock-names = "apb_pclk";
+                       status="disabled";
+               };
+               gpio15: gpio@fd4f0000 {
+                       #gpio-cells = <2>;
+                       compatible = "arm,pl061", "arm,primecell";
+                       gpio-controller;
+                       reg = <0x0 0xfd4f0000 0x1000>;
+                       clocks = <&clk_bus>;
+                       clock-names = "apb_pclk";
+                       status="disabled";
+               };
+               gpio16: gpio@fd500000 {
+                       #gpio-cells = <2>;
+                       compatible = "arm,pl061", "arm,primecell";
+                       gpio-controller;
+                       reg = <0x0 0xfd500000 0x1000>;
+                       clocks = <&clk_bus>;
+                       clock-names = "apb_pclk";
+                       status="disabled";
+               };
+               gpio17: gpio@fd510000 {
+                       #gpio-cells = <2>;
+                       compatible = "arm,pl061", "arm,primecell";
+                       gpio-controller;
+                       reg = <0x0 0xfd510000 0x1000>;
+                       clocks = <&clk_bus>;
+                       clock-names = "apb_pclk";
+               };
+       };
+};