staging: octeon-usb: Probe via device tree populated platform device.
authorDavid Daney <david.daney@cavium.com>
Mon, 3 Feb 2014 17:39:01 +0000 (19:39 +0200)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Fri, 7 Feb 2014 17:11:28 +0000 (09:11 -0800)
Extract clocking parameters from the device tree, and remove now dead
code and types.

Signed-off-by: David Daney <david.daney@cavium.com>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/staging/octeon-usb/octeon-hcd.c

index 47e0a91..5a001d9 100644 (file)
@@ -275,13 +275,6 @@ enum cvmx_usb_pipe_flags {
  */
 #define MAX_TRANSFER_PACKETS   ((1<<10)-1)
 
-enum {
-       USB_CLOCK_TYPE_REF_12,
-       USB_CLOCK_TYPE_REF_24,
-       USB_CLOCK_TYPE_REF_48,
-       USB_CLOCK_TYPE_CRYSTAL_12,
-};
-
 /**
  * Logical transactions may take numerous low level
  * transactions, especially when splits are concerned. This
@@ -471,19 +464,6 @@ struct octeon_hcd {
 /* Returns the IO address to push/pop stuff data from the FIFOs */
 #define USB_FIFO_ADDRESS(channel, usb_index) (CVMX_USBCX_GOTGCTL(usb_index) + ((channel)+1)*0x1000)
 
-static int octeon_usb_get_clock_type(void)
-{
-       switch (cvmx_sysinfo_get()->board_type) {
-       case CVMX_BOARD_TYPE_BBGW_REF:
-       case CVMX_BOARD_TYPE_LANAI2_A:
-       case CVMX_BOARD_TYPE_LANAI2_U:
-       case CVMX_BOARD_TYPE_LANAI2_G:
-       case CVMX_BOARD_TYPE_UBNT_E100:
-               return USB_CLOCK_TYPE_CRYSTAL_12;
-       }
-       return USB_CLOCK_TYPE_REF_48;
-}
-
 /**
  * Read a USB 32bit CSR. It performs the necessary address swizzle
  * for 32bit CSRs and logs the value in a readable format if
@@ -582,37 +562,6 @@ static inline int __cvmx_usb_get_data_pid(struct cvmx_usb_pipe *pipe)
                return 0; /* Data0 */
 }
 
-
-/**
- * Return the number of USB ports supported by this Octeon
- * chip. If the chip doesn't support USB, or is not supported
- * by this API, a zero will be returned. Most Octeon chips
- * support one usb port, but some support two ports.
- * cvmx_usb_initialize() must be called on independent
- * struct cvmx_usb_state.
- *
- * Returns: Number of port, zero if usb isn't supported
- */
-static int cvmx_usb_get_num_ports(void)
-{
-       int arch_ports = 0;
-
-       if (OCTEON_IS_MODEL(OCTEON_CN56XX))
-               arch_ports = 1;
-       else if (OCTEON_IS_MODEL(OCTEON_CN52XX))
-               arch_ports = 2;
-       else if (OCTEON_IS_MODEL(OCTEON_CN50XX))
-               arch_ports = 1;
-       else if (OCTEON_IS_MODEL(OCTEON_CN31XX))
-               arch_ports = 1;
-       else if (OCTEON_IS_MODEL(OCTEON_CN30XX))
-               arch_ports = 1;
-       else
-               arch_ports = 0;
-
-       return arch_ports;
-}
-
 /**
  * Initialize a USB port for use. This must be called before any
  * other access to the Octeon USB port is made. The port starts
@@ -628,41 +577,16 @@ static int cvmx_usb_get_num_ports(void)
  * Returns: 0 or a negative error code.
  */
 static int cvmx_usb_initialize(struct cvmx_usb_state *usb,
-                              int usb_port_number)
+                              int usb_port_number,
+                              enum cvmx_usb_initialize_flags flags)
 {
        union cvmx_usbnx_clk_ctl usbn_clk_ctl;
        union cvmx_usbnx_usbp_ctl_status usbn_usbp_ctl_status;
-       enum cvmx_usb_initialize_flags flags = 0;
        int i;
 
        /* At first allow 0-1 for the usb port number */
        if ((usb_port_number < 0) || (usb_port_number > 1))
                return -EINVAL;
-       /* For all chips except 52XX there is only one port */
-       if (!OCTEON_IS_MODEL(OCTEON_CN52XX) && (usb_port_number > 0))
-               return -EINVAL;
-       /* Try to determine clock type automatically */
-       if (octeon_usb_get_clock_type() == USB_CLOCK_TYPE_CRYSTAL_12) {
-               /* Only 12 MHZ crystals are supported */
-               flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_XI;
-       } else {
-               flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND;
-
-               switch (octeon_usb_get_clock_type()) {
-               case USB_CLOCK_TYPE_REF_12:
-                       flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_12MHZ;
-                       break;
-               case USB_CLOCK_TYPE_REF_24:
-                       flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_24MHZ;
-                       break;
-               case USB_CLOCK_TYPE_REF_48:
-                       flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_48MHZ;
-                       break;
-               default:
-                       return -EINVAL;
-                       break;
-               }
-       }
 
        memset(usb, 0, sizeof(*usb));
        usb->init_flags = flags;
@@ -3431,7 +3355,6 @@ static int octeon_usb_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
        return 0;
 }
 
-
 static const struct hc_driver octeon_hc_driver = {
        .description            = "Octeon USB",
        .product_desc           = "Octeon Host Controller",
@@ -3448,15 +3371,74 @@ static const struct hc_driver octeon_hc_driver = {
        .hub_control            = octeon_usb_hub_control,
 };
 
-
-static int octeon_usb_driver_probe(struct device *dev)
+static int octeon_usb_probe(struct platform_device *pdev)
 {
        int status;
-       int usb_num = to_platform_device(dev)->id;
-       int irq = platform_get_irq(to_platform_device(dev), 0);
+       int initialize_flags;
+       int usb_num;
+       struct resource *res_mem;
+       struct device_node *usbn_node;
+       int irq = platform_get_irq(pdev, 0);
+       struct device *dev = &pdev->dev;
        struct octeon_hcd *priv;
        struct usb_hcd *hcd;
        unsigned long flags;
+       u32 clock_rate = 48000000;
+       bool is_crystal_clock = false;
+       const char *clock_type;
+       int i;
+
+       if (dev->of_node == NULL) {
+               dev_err(dev, "Error: empty of_node\n");
+               return -ENXIO;
+       }
+       usbn_node = dev->of_node->parent;
+
+       i = of_property_read_u32(usbn_node,
+                                "refclk-frequency", &clock_rate);
+       if (i) {
+               dev_err(dev, "No USBN \"refclk-frequency\"\n");
+               return -ENXIO;
+       }
+       switch (clock_rate) {
+       case 12000000:
+               initialize_flags = CVMX_USB_INITIALIZE_FLAGS_CLOCK_12MHZ;
+               break;
+       case 24000000:
+               initialize_flags = CVMX_USB_INITIALIZE_FLAGS_CLOCK_24MHZ;
+               break;
+       case 48000000:
+               initialize_flags = CVMX_USB_INITIALIZE_FLAGS_CLOCK_48MHZ;
+               break;
+       default:
+               dev_err(dev, "Illebal USBN \"refclk-frequency\" %u\n", clock_rate);
+               return -ENXIO;
+
+       }
+
+       i = of_property_read_string(usbn_node,
+                                   "refclk-type", &clock_type);
+
+       if (!i && strcmp("crystal", clock_type) == 0)
+               is_crystal_clock = true;
+
+       if (is_crystal_clock)
+               initialize_flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_XI;
+       else
+               initialize_flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND;
+
+       res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       if (res_mem == NULL) {
+               dev_err(dev, "found no memory resource\n");
+               return -ENXIO;
+       }
+       usb_num = (res_mem->start >> 44) & 1;
+
+       if (irq < 0) {
+               /* Defective device tree, but we know how to fix it. */
+               irq_hw_number_t hwirq = usb_num ? (1 << 6) + 17 : 56;
+               irq = irq_create_mapping(NULL, hwirq);
+       }
 
        /*
         * Set the DMA mask to 64bits so we get buffers already translated for
@@ -3465,6 +3447,26 @@ static int octeon_usb_driver_probe(struct device *dev)
        dev->coherent_dma_mask = ~0;
        dev->dma_mask = &dev->coherent_dma_mask;
 
+       /*
+        * Only cn52XX and cn56XX have DWC_OTG USB hardware and the
+        * IOB priority registers.  Under heavy network load USB
+        * hardware can be starved by the IOB causing a crash.  Give
+        * it a priority boost if it has been waiting more than 400
+        * cycles to avoid this situation.
+        *
+        * Testing indicates that a cnt_val of 8192 is not sufficient,
+        * but no failures are seen with 4096.  We choose a value of
+        * 400 to give a safety factor of 10.
+        */
+       if (OCTEON_IS_MODEL(OCTEON_CN52XX) || OCTEON_IS_MODEL(OCTEON_CN56XX)) {
+               union cvmx_iob_n2c_l2c_pri_cnt pri_cnt;
+
+               pri_cnt.u64 = 0;
+               pri_cnt.s.cnt_enb = 1;
+               pri_cnt.s.cnt_val = 400;
+               cvmx_write_csr(CVMX_IOB_N2C_L2C_PRI_CNT, pri_cnt.u64);
+       }
+
        hcd = usb_create_hcd(&octeon_hc_driver, dev, dev_name(dev));
        if (!hcd) {
                dev_dbg(dev, "Failed to allocate memory for HCD\n");
@@ -3478,7 +3480,7 @@ static int octeon_usb_driver_probe(struct device *dev)
        tasklet_init(&priv->dequeue_tasklet, octeon_usb_urb_dequeue_work, (unsigned long)priv);
        INIT_LIST_HEAD(&priv->dequeue_list);
 
-       status = cvmx_usb_initialize(&priv->usb, usb_num);
+       status = cvmx_usb_initialize(&priv->usb, usb_num, initialize_flags);
        if (status) {
                dev_dbg(dev, "USB initialization failed with %d\n", status);
                kfree(hcd);
@@ -3492,7 +3494,7 @@ static int octeon_usb_driver_probe(struct device *dev)
        cvmx_usb_poll(&priv->usb);
        spin_unlock_irqrestore(&priv->lock, flags);
 
-       status = usb_add_hcd(hcd, irq, IRQF_SHARED);
+       status = usb_add_hcd(hcd, irq, 0);
        if (status) {
                dev_dbg(dev, "USB add HCD failed with %d\n", status);
                kfree(hcd);
@@ -3500,14 +3502,15 @@ static int octeon_usb_driver_probe(struct device *dev)
        }
        device_wakeup_enable(hcd->self.controller);
 
-       dev_dbg(dev, "Registered HCD for port %d on irq %d\n", usb_num, irq);
+       dev_info(dev, "Registered HCD for port %d on irq %d\n", usb_num, irq);
 
        return 0;
 }
 
-static int octeon_usb_driver_remove(struct device *dev)
+static int octeon_usb_remove(struct platform_device *pdev)
 {
        int status;
+       struct device *dev = &pdev->dev;
        struct usb_hcd *hcd = dev_get_drvdata(dev);
        struct octeon_hcd *priv = hcd_to_octeon(hcd);
        unsigned long flags;
@@ -3525,85 +3528,41 @@ static int octeon_usb_driver_remove(struct device *dev)
        return 0;
 }
 
-static struct device_driver octeon_usb_driver = {
-       .name   = "OcteonUSB",
-       .bus    = &platform_bus_type,
-       .probe  = octeon_usb_driver_probe,
-       .remove = octeon_usb_driver_remove,
+static struct of_device_id octeon_usb_match[] = {
+       {
+               .compatible = "cavium,octeon-5750-usbc",
+       },
+       {},
 };
 
+static struct platform_driver octeon_usb_driver = {
+       .driver = {
+               .name       = "OcteonUSB",
+               .owner          = THIS_MODULE,
+               .of_match_table = octeon_usb_match,
+       },
+       .probe      = octeon_usb_probe,
+       .remove     = octeon_usb_remove,
+};
 
-#define MAX_USB_PORTS   10
-static struct platform_device *pdev_glob[MAX_USB_PORTS];
-static int octeon_usb_registered;
-static int __init octeon_usb_module_init(void)
+static int __init octeon_usb_driver_init(void)
 {
-       int num_devices = cvmx_usb_get_num_ports();
-       int device;
-
-       if (usb_disabled() || num_devices == 0)
-               return -ENODEV;
-
-       if (driver_register(&octeon_usb_driver))
-               return -ENOMEM;
-
-       octeon_usb_registered = 1;
-
-       /*
-        * Only cn52XX and cn56XX have DWC_OTG USB hardware and the
-        * IOB priority registers.  Under heavy network load USB
-        * hardware can be starved by the IOB causing a crash.  Give
-        * it a priority boost if it has been waiting more than 400
-        * cycles to avoid this situation.
-        *
-        * Testing indicates that a cnt_val of 8192 is not sufficient,
-        * but no failures are seen with 4096.  We choose a value of
-        * 400 to give a safety factor of 10.
-        */
-       if (OCTEON_IS_MODEL(OCTEON_CN52XX) || OCTEON_IS_MODEL(OCTEON_CN56XX)) {
-               union cvmx_iob_n2c_l2c_pri_cnt pri_cnt;
-
-               pri_cnt.u64 = 0;
-               pri_cnt.s.cnt_enb = 1;
-               pri_cnt.s.cnt_val = 400;
-               cvmx_write_csr(CVMX_IOB_N2C_L2C_PRI_CNT, pri_cnt.u64);
-       }
-
-       for (device = 0; device < num_devices; device++) {
-               struct resource irq_resource;
-               struct platform_device *pdev;
-               memset(&irq_resource, 0, sizeof(irq_resource));
-               irq_resource.start = (device == 0) ? OCTEON_IRQ_USB0 : OCTEON_IRQ_USB1;
-               irq_resource.end = irq_resource.start;
-               irq_resource.flags = IORESOURCE_IRQ;
-               pdev = platform_device_register_simple((char *)octeon_usb_driver.  name, device, &irq_resource, 1);
-               if (IS_ERR(pdev)) {
-                       driver_unregister(&octeon_usb_driver);
-                       octeon_usb_registered = 0;
-                       return PTR_ERR(pdev);
-               }
-               if (device < MAX_USB_PORTS)
-                       pdev_glob[device] = pdev;
+       if (usb_disabled())
+               return 0;
 
-       }
-       return 0;
+       return platform_driver_register(&octeon_usb_driver);
 }
+module_init(octeon_usb_driver_init);
 
-static void __exit octeon_usb_module_cleanup(void)
+static void __exit octeon_usb_driver_exit(void)
 {
-       int i;
+       if (usb_disabled())
+               return;
 
-       for (i = 0; i < MAX_USB_PORTS; i++)
-               if (pdev_glob[i]) {
-                       platform_device_unregister(pdev_glob[i]);
-                       pdev_glob[i] = NULL;
-               }
-       if (octeon_usb_registered)
-               driver_unregister(&octeon_usb_driver);
+       platform_driver_unregister(&octeon_usb_driver);
 }
+module_exit(octeon_usb_driver_exit);
 
 MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Cavium Networks <support@caviumnetworks.com>");
-MODULE_DESCRIPTION("Cavium Networks Octeon USB Host driver.");
-module_init(octeon_usb_module_init);
-module_exit(octeon_usb_module_cleanup);
+MODULE_AUTHOR("Cavium, Inc. <support@cavium.com>");
+MODULE_DESCRIPTION("Cavium Inc. OCTEON USB Host driver.");