+++ /dev/null
-Power Management Service Unit(PMSU)
------------------------------------
-Available on Marvell SOCs: Armada 370, Armada 38x and Armada XP
-
-Required properties:
-
-- compatible: should be one of:
- - "marvell,armada-370-pmsu" for Armada 370 or Armada XP
- - "marvell,armada-380-pmsu" for Armada 38x
- - "marvell,armada-370-xp-pmsu" was used for Armada 370/XP but is now
- deprecated and will be removed
-
-- reg: Should contain PMSU registers location and length.
-
-Example:
-
-armada-370-xp-pmsu@22000 {
- compatible = "marvell,armada-370-pmsu";
- reg = <0x22000 0x1000>;
-};
-
+++ /dev/null
-Marvell Armada 370 and Armada XP Platforms Device Tree Bindings
----------------------------------------------------------------
-
-Boards with a SoC of the Marvell Armada 370 and Armada XP families
-shall have the following property:
-
-Required root node property:
-
-compatible: must contain "marvell,armada-370-xp"
-
-In addition, boards using the Marvell Armada 370 SoC shall have the
-following property:
-
-Required root node property:
-
-compatible: must contain "marvell,armada370"
-
-In addition, boards using the Marvell Armada XP SoC shall have the
-following property:
-
-Required root node property:
-
-compatible: must contain "marvell,armadaxp"
-
+++ /dev/null
-Marvell Armada 375 Platforms Device Tree Bindings
--------------------------------------------------
-
-Boards with a SoC of the Marvell Armada 375 family shall have the
-following property:
-
-Required root node property:
-
-compatible: must contain "marvell,armada375"
+++ /dev/null
-Marvell Armada 38x CA9 MPcore SoC Controller
-============================================
-
-Required properties:
-
-- compatible: Should be "marvell,armada-380-mpcore-soc-ctrl".
-
-- reg: should be the register base and length as documented in the
- datasheet for the CA9 MPcore SoC Control registers
-
-mpcore-soc-ctrl@20d20 {
- compatible = "marvell,armada-380-mpcore-soc-ctrl";
- reg = <0x20d20 0x6c>;
-};
+++ /dev/null
-Marvell Armada 38x Platforms Device Tree Bindings
--------------------------------------------------
-
-Boards with a SoC of the Marvell Armada 38x family shall have the
-following property:
-
-Required root node property:
-
- - compatible: must contain "marvell,armada380"
-
-In addition, boards using the Marvell Armada 385 SoC shall have the
-following property before the previous one:
-
-Required root node property:
-
-compatible: must contain "marvell,armada385"
-
-In addition, boards using the Marvell Armada 388 SoC shall have the
-following property before the previous one:
-
-Required root node property:
-
-compatible: must contain "marvell,armada388"
-
-Example:
-
-compatible = "marvell,a385-rd", "marvell,armada385", "marvell,armada380";
+++ /dev/null
-Marvell Armada 39x Platforms Device Tree Bindings
--------------------------------------------------
-
-Boards with a SoC of the Marvell Armada 39x family shall have the
-following property:
-
-Required root node property:
-
- - compatible: must contain "marvell,armada390"
-
-In addition, boards using the Marvell Armada 398 SoC shall have the
-following property before the previous one:
-
-Required root node property:
-
-compatible: must contain "marvell,armada398"
-
-Example:
-
-compatible = "marvell,a398-db", "marvell,armada398", "marvell,armada390";
+++ /dev/null
-Marvell Armada CPU reset controller
-===================================
-
-Required properties:
-
-- compatible: Should be "marvell,armada-370-cpu-reset".
-
-- reg: should be register base and length as documented in the
- datasheet for the CPU reset registers
-
-cpurst: cpurst@20800 {
- compatible = "marvell,armada-370-cpu-reset";
- reg = <0x20800 0x20>;
-};
+++ /dev/null
-Coherency fabric
-----------------
-Available on Marvell SOCs: Armada 370, Armada 375, Armada 38x and Armada XP
-
-Required properties:
-
-- compatible: the possible values are:
-
- * "marvell,coherency-fabric", to be used for the coherency fabric of
- the Armada 370 and Armada XP.
-
- * "marvell,armada-375-coherency-fabric", for the Armada 375 coherency
- fabric.
-
- * "marvell,armada-380-coherency-fabric", for the Armada 38x coherency
- fabric.
-
-- reg: Should contain coherency fabric registers location and
- length.
-
- * For "marvell,coherency-fabric", the first pair for the coherency
- fabric registers, second pair for the per-CPU fabric registers.
-
- * For "marvell,armada-375-coherency-fabric", only one pair is needed
- for the per-CPU fabric registers.
-
- * For "marvell,armada-380-coherency-fabric", only one pair is needed
- for the per-CPU fabric registers.
-
-Optional properties:
-
-- broken-idle: boolean to set when the Idle mode is not supported by the
- hardware.
-
-Examples:
-
-coherency-fabric@d0020200 {
- compatible = "marvell,coherency-fabric";
- reg = <0xd0020200 0xb0>,
- <0xd0021810 0x1c>;
-
-};
-
-coherency-fabric@21810 {
- compatible = "marvell,armada-375-coherency-fabric";
- reg = <0x21810 0x1c>;
-};
-
+++ /dev/null
-Marvell Kirkwood Platforms Device Tree Bindings
------------------------------------------------
-
-Boards with a SoC of the Marvell Kirkwood
-shall have the following property:
-
-Required root node property:
-
-compatible: must contain "marvell,kirkwood";
-
-In order to support the kirkwood cpufreq driver, there must be a node
-cpus/cpu@0 with three clocks, "cpu_clk", "ddrclk" and "powersave",
-where the "powersave" clock is a gating clock used to switch the CPU
-between the "cpu_clk" and the "ddrclk".
-
-Example:
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@0 {
- device_type = "cpu";
- compatible = "marvell,sheeva-88SV131";
- clocks = <&core_clk 1>, <&core_clk 3>, <&gate_clk 11>;
- clock-names = "cpu_clk", "ddrclk", "powersave";
- };
+++ /dev/null
-Marvell Berlin SoC Family Device Tree Bindings
----------------------------------------------------------------
-
-Work in progress statement:
-
-Device tree files and bindings applying to Marvell Berlin SoCs and boards are
-considered "unstable". Any Marvell Berlin device tree binding may change at any
-time. Be sure to use a device tree binary and a kernel image generated from the
-same source tree.
-
-Please refer to Documentation/devicetree/bindings/ABI.txt for a definition of a
-stable binding/ABI.
-
----------------------------------------------------------------
-
-Boards with a SoC of the Marvell Berlin family, e.g. Armada 1500
-shall have the following properties:
-
-* Required root node properties:
-compatible: must contain "marvell,berlin"
-
-In addition, the above compatible shall be extended with the specific
-SoC and board used. Currently known SoC compatibles are:
- "marvell,berlin2" for Marvell Armada 1500 (BG2, 88DE3100),
- "marvell,berlin2cd" for Marvell Armada 1500-mini (BG2CD, 88DE3005)
- "marvell,berlin2ct" for Marvell Armada ? (BG2CT, 88DE????)
- "marvell,berlin2q" for Marvell Armada 1500-pro (BG2Q, 88DE3114)
- "marvell,berlin3" for Marvell Armada ? (BG3, 88DE????)
-
-* Example:
-
-/ {
- model = "Sony NSZ-GS7";
- compatible = "sony,nsz-gs7", "marvell,berlin2", "marvell,berlin";
-
- ...
-}
-
-* Marvell Berlin CPU control bindings
-
-CPU control register allows various operations on CPUs, like resetting them
-independently.
-
-Required properties:
-- compatible: should be "marvell,berlin-cpu-ctrl"
-- reg: address and length of the register set
-
-Example:
-
-cpu-ctrl@f7dd0000 {
- compatible = "marvell,berlin-cpu-ctrl";
- reg = <0xf7dd0000 0x10000>;
-};
-
-* Marvell Berlin2 chip control binding
-
-Marvell Berlin SoCs have a chip control register set providing several
-individual registers dealing with pinmux, padmux, clock, reset, and secondary
-CPU boot address. Unfortunately, the individual registers are spread among the
-chip control registers, so there should be a single DT node only providing the
-different functions which are described below.
-
-Required properties:
-- compatible:
- * the first and second values must be:
- "simple-mfd", "syscon"
-- reg: address and length of following register sets for
- BG2/BG2CD: chip control register set
- BG2Q: chip control register set and cpu pll registers
-
-* Marvell Berlin2 system control binding
-
-Marvell Berlin SoCs have a system control register set providing several
-individual registers dealing with pinmux, padmux, and reset.
-
-Required properties:
-- compatible:
- * the first and second values must be:
- "simple-mfd", "syscon"
-- reg: address and length of the system control register set
-
-Example:
-
-chip: chip-control@ea0000 {
- compatible = "simple-mfd", "syscon";
- reg = <0xea0000 0x400>;
-
- /* sub-device nodes */
-};
-
-sysctrl: system-controller@d000 {
- compatible = "simple-mfd", "syscon";
- reg = <0xd000 0x100>;
-
- /* sub-device nodes */
-};
+++ /dev/null
-Marvell Dove Platforms Device Tree Bindings
------------------------------------------------
-
-Boards with a Marvell Dove SoC shall have the following properties:
-
-Required root node property:
-- compatible: must contain "marvell,dove";
-
-* Global Configuration registers
-
-Global Configuration registers of Dove SoC are shared by a syscon node.
-
-Required properties:
-- compatible: must contain "marvell,dove-global-config" and "syscon".
-- reg: base address and size of the Global Configuration registers.
-
-Example:
-
-gconf: global-config@e802c {
- compatible = "marvell,dove-global-config", "syscon";
- reg = <0xe802c 0x14>;
-};
+++ /dev/null
-Marvell Kirkwood SoC Family Device Tree Bindings
-------------------------------------------------
-
-Boards with a SoC of the Marvell Kirkwook family, eg 88f6281
-
-* Required root node properties:
-compatible: must contain "marvell,kirkwood"
-
-In addition, the above compatible shall be extended with the specific
-SoC. Currently known SoC compatibles are:
-
-"marvell,kirkwood-88f6192"
-"marvell,kirkwood-88f6281"
-"marvell,kirkwood-88f6282"
-"marvell,kirkwood-88f6283"
-"marvell,kirkwood-88f6702"
-"marvell,kirkwood-98DX4122"
-
-And in addition, the compatible shall be extended with the specific
-board. Currently known boards are:
-
-"buffalo,lschlv2"
-"buffalo,lswvl"
-"buffalo,lswxl"
-"buffalo,lsxhl"
-"buffalo,lsxl"
-"cloudengines,pogo02"
-"cloudengines,pogoplugv4"
-"dlink,dns-320"
-"dlink,dns-320-a1"
-"dlink,dns-325"
-"dlink,dns-325-a1"
-"dlink,dns-kirkwood"
-"excito,b3"
-"globalscale,dreamplug-003-ds2001"
-"globalscale,guruplug"
-"globalscale,guruplug-server-plus"
-"globalscale,sheevaplug"
-"globalscale,sheevaplug"
-"globalscale,sheevaplug-esata"
-"globalscale,sheevaplug-esata-rev13"
-"iom,iconnect"
-"iom,iconnect-1.1"
-"iom,ix2-200"
-"keymile,km_kirkwood"
-"lacie,cloudbox"
-"lacie,inetspace_v2"
-"lacie,laplug"
-"lacie,nas2big"
-"lacie,netspace_lite_v2"
-"lacie,netspace_max_v2"
-"lacie,netspace_mini_v2"
-"lacie,netspace_v2"
-"marvell,db-88f6281-bp"
-"marvell,db-88f6282-bp"
-"marvell,mv88f6281gtw-ge"
-"marvell,rd88f6281"
-"marvell,rd88f6281"
-"marvell,rd88f6281-a0"
-"marvell,rd88f6281-a1"
-"mpl,cec4"
-"mpl,cec4-10"
-"netgear,readynas"
-"netgear,readynas"
-"netgear,readynas-duo-v2"
-"netgear,readynas-nv+-v2"
-"plathome,openblocks-a6"
-"plathome,openblocks-a7"
-"raidsonic,ib-nas6210"
-"raidsonic,ib-nas6210-b"
-"raidsonic,ib-nas6220"
-"raidsonic,ib-nas6220-b"
-"raidsonic,ib-nas62x0"
-"seagate,dockstar"
-"seagate,goflexnet"
-"synology,ds109"
-"synology,ds110jv10"
-"synology,ds110jv20"
-"synology,ds110jv30"
-"synology,ds111"
-"synology,ds209"
-"synology,ds210jv10"
-"synology,ds210jv20"
-"synology,ds212"
-"synology,ds212jv10"
-"synology,ds212jv20"
-"synology,ds212pv10"
-"synology,ds409"
-"synology,ds409slim"
-"synology,ds410j"
-"synology,ds411"
-"synology,ds411j"
-"synology,ds411slim"
-"synology,ds413jv10"
-"synology,rs212"
-"synology,rs409"
-"synology,rs411"
-"synology,rs812"
-"usi,topkick"
-"usi,topkick-1281P2"
-"zyxel,nsa310"
-"zyxel,nsa310a"
--- /dev/null
+Power Management Service Unit(PMSU)
+-----------------------------------
+Available on Marvell SOCs: Armada 370, Armada 38x and Armada XP
+
+Required properties:
+
+- compatible: should be one of:
+ - "marvell,armada-370-pmsu" for Armada 370 or Armada XP
+ - "marvell,armada-380-pmsu" for Armada 38x
+ - "marvell,armada-370-xp-pmsu" was used for Armada 370/XP but is now
+ deprecated and will be removed
+
+- reg: Should contain PMSU registers location and length.
+
+Example:
+
+armada-370-xp-pmsu@22000 {
+ compatible = "marvell,armada-370-pmsu";
+ reg = <0x22000 0x1000>;
+};
+
--- /dev/null
+Marvell Armada 370 and Armada XP Platforms Device Tree Bindings
+---------------------------------------------------------------
+
+Boards with a SoC of the Marvell Armada 370 and Armada XP families
+shall have the following property:
+
+Required root node property:
+
+compatible: must contain "marvell,armada-370-xp"
+
+In addition, boards using the Marvell Armada 370 SoC shall have the
+following property:
+
+Required root node property:
+
+compatible: must contain "marvell,armada370"
+
+In addition, boards using the Marvell Armada XP SoC shall have the
+following property:
+
+Required root node property:
+
+compatible: must contain "marvell,armadaxp"
+
--- /dev/null
+Marvell Armada 375 Platforms Device Tree Bindings
+-------------------------------------------------
+
+Boards with a SoC of the Marvell Armada 375 family shall have the
+following property:
+
+Required root node property:
+
+compatible: must contain "marvell,armada375"
--- /dev/null
+Marvell Armada 38x CA9 MPcore SoC Controller
+============================================
+
+Required properties:
+
+- compatible: Should be "marvell,armada-380-mpcore-soc-ctrl".
+
+- reg: should be the register base and length as documented in the
+ datasheet for the CA9 MPcore SoC Control registers
+
+mpcore-soc-ctrl@20d20 {
+ compatible = "marvell,armada-380-mpcore-soc-ctrl";
+ reg = <0x20d20 0x6c>;
+};
--- /dev/null
+Marvell Armada 38x Platforms Device Tree Bindings
+-------------------------------------------------
+
+Boards with a SoC of the Marvell Armada 38x family shall have the
+following property:
+
+Required root node property:
+
+ - compatible: must contain "marvell,armada380"
+
+In addition, boards using the Marvell Armada 385 SoC shall have the
+following property before the previous one:
+
+Required root node property:
+
+compatible: must contain "marvell,armada385"
+
+In addition, boards using the Marvell Armada 388 SoC shall have the
+following property before the previous one:
+
+Required root node property:
+
+compatible: must contain "marvell,armada388"
+
+Example:
+
+compatible = "marvell,a385-rd", "marvell,armada385", "marvell,armada380";
--- /dev/null
+Marvell Armada 39x Platforms Device Tree Bindings
+-------------------------------------------------
+
+Boards with a SoC of the Marvell Armada 39x family shall have the
+following property:
+
+Required root node property:
+
+ - compatible: must contain "marvell,armada390"
+
+In addition, boards using the Marvell Armada 398 SoC shall have the
+following property before the previous one:
+
+Required root node property:
+
+compatible: must contain "marvell,armada398"
+
+Example:
+
+compatible = "marvell,a398-db", "marvell,armada398", "marvell,armada390";
--- /dev/null
+Marvell Armada CPU reset controller
+===================================
+
+Required properties:
+
+- compatible: Should be "marvell,armada-370-cpu-reset".
+
+- reg: should be register base and length as documented in the
+ datasheet for the CPU reset registers
+
+cpurst: cpurst@20800 {
+ compatible = "marvell,armada-370-cpu-reset";
+ reg = <0x20800 0x20>;
+};
--- /dev/null
+Coherency fabric
+----------------
+Available on Marvell SOCs: Armada 370, Armada 375, Armada 38x and Armada XP
+
+Required properties:
+
+- compatible: the possible values are:
+
+ * "marvell,coherency-fabric", to be used for the coherency fabric of
+ the Armada 370 and Armada XP.
+
+ * "marvell,armada-375-coherency-fabric", for the Armada 375 coherency
+ fabric.
+
+ * "marvell,armada-380-coherency-fabric", for the Armada 38x coherency
+ fabric.
+
+- reg: Should contain coherency fabric registers location and
+ length.
+
+ * For "marvell,coherency-fabric", the first pair for the coherency
+ fabric registers, second pair for the per-CPU fabric registers.
+
+ * For "marvell,armada-375-coherency-fabric", only one pair is needed
+ for the per-CPU fabric registers.
+
+ * For "marvell,armada-380-coherency-fabric", only one pair is needed
+ for the per-CPU fabric registers.
+
+Optional properties:
+
+- broken-idle: boolean to set when the Idle mode is not supported by the
+ hardware.
+
+Examples:
+
+coherency-fabric@d0020200 {
+ compatible = "marvell,coherency-fabric";
+ reg = <0xd0020200 0xb0>,
+ <0xd0021810 0x1c>;
+
+};
+
+coherency-fabric@21810 {
+ compatible = "marvell,armada-375-coherency-fabric";
+ reg = <0x21810 0x1c>;
+};
+
--- /dev/null
+Marvell Kirkwood Platforms Device Tree Bindings
+-----------------------------------------------
+
+Boards with a SoC of the Marvell Kirkwood
+shall have the following property:
+
+Required root node property:
+
+compatible: must contain "marvell,kirkwood";
+
+In order to support the kirkwood cpufreq driver, there must be a node
+cpus/cpu@0 with three clocks, "cpu_clk", "ddrclk" and "powersave",
+where the "powersave" clock is a gating clock used to switch the CPU
+between the "cpu_clk" and the "ddrclk".
+
+Example:
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "marvell,sheeva-88SV131";
+ clocks = <&core_clk 1>, <&core_clk 3>, <&gate_clk 11>;
+ clock-names = "cpu_clk", "ddrclk", "powersave";
+ };
--- /dev/null
+Marvell Berlin SoC Family Device Tree Bindings
+---------------------------------------------------------------
+
+Work in progress statement:
+
+Device tree files and bindings applying to Marvell Berlin SoCs and boards are
+considered "unstable". Any Marvell Berlin device tree binding may change at any
+time. Be sure to use a device tree binary and a kernel image generated from the
+same source tree.
+
+Please refer to Documentation/devicetree/bindings/ABI.txt for a definition of a
+stable binding/ABI.
+
+---------------------------------------------------------------
+
+Boards with a SoC of the Marvell Berlin family, e.g. Armada 1500
+shall have the following properties:
+
+* Required root node properties:
+compatible: must contain "marvell,berlin"
+
+In addition, the above compatible shall be extended with the specific
+SoC and board used. Currently known SoC compatibles are:
+ "marvell,berlin2" for Marvell Armada 1500 (BG2, 88DE3100),
+ "marvell,berlin2cd" for Marvell Armada 1500-mini (BG2CD, 88DE3005)
+ "marvell,berlin2ct" for Marvell Armada ? (BG2CT, 88DE????)
+ "marvell,berlin2q" for Marvell Armada 1500-pro (BG2Q, 88DE3114)
+ "marvell,berlin3" for Marvell Armada ? (BG3, 88DE????)
+
+* Example:
+
+/ {
+ model = "Sony NSZ-GS7";
+ compatible = "sony,nsz-gs7", "marvell,berlin2", "marvell,berlin";
+
+ ...
+}
+
+* Marvell Berlin CPU control bindings
+
+CPU control register allows various operations on CPUs, like resetting them
+independently.
+
+Required properties:
+- compatible: should be "marvell,berlin-cpu-ctrl"
+- reg: address and length of the register set
+
+Example:
+
+cpu-ctrl@f7dd0000 {
+ compatible = "marvell,berlin-cpu-ctrl";
+ reg = <0xf7dd0000 0x10000>;
+};
+
+* Marvell Berlin2 chip control binding
+
+Marvell Berlin SoCs have a chip control register set providing several
+individual registers dealing with pinmux, padmux, clock, reset, and secondary
+CPU boot address. Unfortunately, the individual registers are spread among the
+chip control registers, so there should be a single DT node only providing the
+different functions which are described below.
+
+Required properties:
+- compatible:
+ * the first and second values must be:
+ "simple-mfd", "syscon"
+- reg: address and length of following register sets for
+ BG2/BG2CD: chip control register set
+ BG2Q: chip control register set and cpu pll registers
+
+* Marvell Berlin2 system control binding
+
+Marvell Berlin SoCs have a system control register set providing several
+individual registers dealing with pinmux, padmux, and reset.
+
+Required properties:
+- compatible:
+ * the first and second values must be:
+ "simple-mfd", "syscon"
+- reg: address and length of the system control register set
+
+Example:
+
+chip: chip-control@ea0000 {
+ compatible = "simple-mfd", "syscon";
+ reg = <0xea0000 0x400>;
+
+ /* sub-device nodes */
+};
+
+sysctrl: system-controller@d000 {
+ compatible = "simple-mfd", "syscon";
+ reg = <0xd000 0x100>;
+
+ /* sub-device nodes */
+};
--- /dev/null
+Marvell Dove Platforms Device Tree Bindings
+-----------------------------------------------
+
+Boards with a Marvell Dove SoC shall have the following properties:
+
+Required root node property:
+- compatible: must contain "marvell,dove";
+
+* Global Configuration registers
+
+Global Configuration registers of Dove SoC are shared by a syscon node.
+
+Required properties:
+- compatible: must contain "marvell,dove-global-config" and "syscon".
+- reg: base address and size of the Global Configuration registers.
+
+Example:
+
+gconf: global-config@e802c {
+ compatible = "marvell,dove-global-config", "syscon";
+ reg = <0xe802c 0x14>;
+};
--- /dev/null
+Marvell Kirkwood SoC Family Device Tree Bindings
+------------------------------------------------
+
+Boards with a SoC of the Marvell Kirkwook family, eg 88f6281
+
+* Required root node properties:
+compatible: must contain "marvell,kirkwood"
+
+In addition, the above compatible shall be extended with the specific
+SoC. Currently known SoC compatibles are:
+
+"marvell,kirkwood-88f6192"
+"marvell,kirkwood-88f6281"
+"marvell,kirkwood-88f6282"
+"marvell,kirkwood-88f6283"
+"marvell,kirkwood-88f6702"
+"marvell,kirkwood-98DX4122"
+
+And in addition, the compatible shall be extended with the specific
+board. Currently known boards are:
+
+"buffalo,lschlv2"
+"buffalo,lswvl"
+"buffalo,lswxl"
+"buffalo,lsxhl"
+"buffalo,lsxl"
+"cloudengines,pogo02"
+"cloudengines,pogoplugv4"
+"dlink,dns-320"
+"dlink,dns-320-a1"
+"dlink,dns-325"
+"dlink,dns-325-a1"
+"dlink,dns-kirkwood"
+"excito,b3"
+"globalscale,dreamplug-003-ds2001"
+"globalscale,guruplug"
+"globalscale,guruplug-server-plus"
+"globalscale,sheevaplug"
+"globalscale,sheevaplug"
+"globalscale,sheevaplug-esata"
+"globalscale,sheevaplug-esata-rev13"
+"iom,iconnect"
+"iom,iconnect-1.1"
+"iom,ix2-200"
+"keymile,km_kirkwood"
+"lacie,cloudbox"
+"lacie,inetspace_v2"
+"lacie,laplug"
+"lacie,nas2big"
+"lacie,netspace_lite_v2"
+"lacie,netspace_max_v2"
+"lacie,netspace_mini_v2"
+"lacie,netspace_v2"
+"marvell,db-88f6281-bp"
+"marvell,db-88f6282-bp"
+"marvell,mv88f6281gtw-ge"
+"marvell,rd88f6281"
+"marvell,rd88f6281"
+"marvell,rd88f6281-a0"
+"marvell,rd88f6281-a1"
+"mpl,cec4"
+"mpl,cec4-10"
+"netgear,readynas"
+"netgear,readynas"
+"netgear,readynas-duo-v2"
+"netgear,readynas-nv+-v2"
+"plathome,openblocks-a6"
+"plathome,openblocks-a7"
+"raidsonic,ib-nas6210"
+"raidsonic,ib-nas6210-b"
+"raidsonic,ib-nas6220"
+"raidsonic,ib-nas6220-b"
+"raidsonic,ib-nas62x0"
+"seagate,dockstar"
+"seagate,goflexnet"
+"synology,ds109"
+"synology,ds110jv10"
+"synology,ds110jv20"
+"synology,ds110jv30"
+"synology,ds111"
+"synology,ds209"
+"synology,ds210jv10"
+"synology,ds210jv20"
+"synology,ds212"
+"synology,ds212jv10"
+"synology,ds212jv20"
+"synology,ds212pv10"
+"synology,ds409"
+"synology,ds409slim"
+"synology,ds410j"
+"synology,ds411"
+"synology,ds411j"
+"synology,ds411slim"
+"synology,ds413jv10"
+"synology,rs212"
+"synology,rs409"
+"synology,rs411"
+"synology,rs812"
+"usi,topkick"
+"usi,topkick-1281P2"
+"zyxel,nsa310"
+"zyxel,nsa310a"
--- /dev/null
+MVEBU CPU Config registers
+--------------------------
+
+MVEBU (Marvell SOCs: Armada 370/XP)
+
+Required properties:
+
+- compatible: one of:
+ - "marvell,armada-370-cpu-config"
+ - "marvell,armada-xp-cpu-config"
+
+- reg: Should contain CPU config registers location and length, in
+ their per-CPU variant
+
+Example:
+
+ cpu-config@21000 {
+ compatible = "marvell,armada-xp-cpu-config";
+ reg = <0x21000 0x8>;
+ };
--- /dev/null
+MVEBU System Controller
+-----------------------
+MVEBU (Marvell SOCs: Armada 370/375/XP, Dove, mv78xx0, Kirkwood, Orion5x)
+
+Required properties:
+
+- compatible: one of:
+ - "marvell,orion-system-controller"
+ - "marvell,armada-370-xp-system-controller"
+ - "marvell,armada-375-system-controller"
+- reg: Should contain system controller registers location and length.
+
+Example:
+
+ system-controller@d0018200 {
+ compatible = "marvell,armada-370-xp-system-controller";
+ reg = <0xd0018200 0x500>;
+ };
+++ /dev/null
-MVEBU CPU Config registers
---------------------------
-
-MVEBU (Marvell SOCs: Armada 370/XP)
-
-Required properties:
-
-- compatible: one of:
- - "marvell,armada-370-cpu-config"
- - "marvell,armada-xp-cpu-config"
-
-- reg: Should contain CPU config registers location and length, in
- their per-CPU variant
-
-Example:
-
- cpu-config@21000 {
- compatible = "marvell,armada-xp-cpu-config";
- reg = <0x21000 0x8>;
- };
+++ /dev/null
-MVEBU System Controller
------------------------
-MVEBU (Marvell SOCs: Armada 370/375/XP, Dove, mv78xx0, Kirkwood, Orion5x)
-
-Required properties:
-
-- compatible: one of:
- - "marvell,orion-system-controller"
- - "marvell,armada-370-xp-system-controller"
- - "marvell,armada-375-system-controller"
-- reg: Should contain system controller registers location and length.
-
-Example:
-
- system-controller@d0018200 {
- compatible = "marvell,armada-370-xp-system-controller";
- reg = <0xd0018200 0x500>;
- };
projects / cascardo / linux.git / commitdiff