1 openvswitch (1.9.0-1) unstable; urgency=low
4 - The tunneling code no longer assumes input and output keys are symmetric.
5 If they are not, PMTUD needs to be disabled for tunneling to work. Note
6 this only applies to flow-based keys.
7 - FreeBSD is now a supported platform, thanks to code contributions from
8 Gaetano Catalli, Ed Maste, and Giuseppe Lettieri.
9 - ovs-bugtool: New --ovs option to report only OVS related information.
10 - New %t and %T log escapes to identify the subprogram within a
11 cooperating group of processes or threads that emitted a log message.
12 The default log patterns now include this information.
14 - Allow bitwise masking for SHA and THA fields in ARP, SLL and TLL
15 fields in IPv6 neighbor discovery messages, and IPv6 flow label.
16 - Adds support for writing to the metadata field for a flow.
18 - Commands and actions that accept port numbers now also accept keywords
19 that represent those ports (such as LOCAL, NONE, and ALL). This is
20 also the recommended way to specify these ports, for compatibility
21 with OpenFlow 1.1 and later (which use the OpenFlow 1.0 numbers
22 for these ports for different purposes).
24 - Support requesting the port number with the "port_no" option in
26 - ovs-pki: The "online PKI" features have been removed, along with
27 the ovs-pki-cgi program that facilitated it, because of some
28 alarmist insecurity claims. We do not believe that these claims
29 are true, but because we do not know of any users for this
30 feature it seems better on balance to remove it. (The ovs-pki-cgi
31 program was not included in distribution packaging.)
32 - ovsdb-server now enforces the immutability of immutable columns. This
33 was not enforced in earlier versions due to an oversight.
34 - New support for a nonstandard form of GRE that supports a 64-bit key.
35 - The following features are now deprecated. They will be removed no
36 earlier than February 2013. Please email dev@openvswitch.org with
39 - The autopath action.
40 - Interface type "null".
41 - Numeric values for reserved ports (see "ovs-ofctl" note above).
43 -- Open vSwitch team <dev@openvswitch.org> Wed, 24 Oct 2012 16:10:39 -0700
45 openvswitch (1.8.0-1) unstable; urgency=low
47 * New upstream version
48 - New FAQ. Please send updates and additions!
49 - Authors of controllers, please read the new section titled "Action
50 Reproduction" in DESIGN, which describes an Open vSwitch change in
51 behavior in corner cases that may affect some controllers.
53 - A new test utility that can create L3 tunnel between two Open
54 vSwitches and detect connectivity issues.
56 - New --sort and --rsort options for "dump-flows" command.
57 - "mod-port" command can now control all OpenFlow config flags.
59 - Allow general bitwise masking for IPv4 and IPv6 addresses in
60 IPv4, IPv6, and ARP packets. (Previously, only CIDR masks
62 - Allow support for arbitrary Ethernet masks. (Previously, only
63 the multicast bit in the destination address could be individually
65 - New field OXM_OF_METADATA, to align with OpenFlow 1.1.
66 - The OFPST_QUEUE request now reports an error if a specified port or
67 queue does not exist, or for requests for a specific queue on all
68 ports, if the specified queue does not exist on any port. (Previous
69 versions generally reported an empty set of results.)
70 - New "flow monitor" feature to allow controllers to be notified of
71 flow table changes as they happen.
72 - Additional protocols are not mirrored and dropped when forward-bpdu is
73 false. For a full list, see the ovs-vswitchd.conf.db man page.
74 - Open vSwitch now sends RARP packets in situations where it previously
75 sent a custom protocol, making it consistent with behavior of QEMU and
77 - All Open vSwitch programs and log files now show timestamps in UTC,
78 instead the local timezone, by default.
80 -- Open vSwitch team <dev@openvswitch.org> Mon, 16 Jul 2012 16:44:52 +0900
82 openvswitch (1.7.0-1) unstable; urgency=low
84 * New upstream version
85 - kernel modules are renamed. openvswitch_mod.ko is now
86 openvswitch.ko and brcompat_mod.ko is now brcompat.ko.
87 - Increased the number of NXM registers to 8.
88 - Added ability to configure dscp setting for manager and controller
89 connections. By default, these connections have a DSCP value of
90 Internetwork Control (0xc0).
91 - Added the granular link health statistics, 'cfm_health', to an
94 - Added support to mask nd_target for ICMPv6 neighbor discovery flows.
95 - Added support for OpenFlow 1.3 port description (OFPMP_PORT_DESC)
98 - Added the "dump-ports-desc" command to retrieve port
99 information using the new port description multipart messages.
101 - Added support for spawning ovs-test server from the client.
102 - Now ovs-test is able to automatically create test bridges and ports.
103 - "ovs-dpctl dump-flows" now prints observed TCP flags in TCP flows.
104 - Tripled flow setup performance.
105 - The "coverage/log" command previously available through ovs-appctl
106 has been replaced by "coverage/show". The new command replies with
107 coverage counter values, instead of logging them.
109 -- Open vSwitch team <dev@openvswitch.org> Mon, 30 Jul 2012 17:23:57 +0900
111 openvswitch (1.6.1-1) unstable; urgency=low
112 [ Open vSwitch team ]
113 * New upstream version
114 - Allow OFPP_CONTROLLER as the in_port for packet-out messages.
116 -- Open vSwitch team <dev@openvswitch.org> Mon, 25 Jun 2012 13:52:17 +0900
118 openvswitch (1.6.0-1) unstable; urgency=low
119 [ Open vSwitch team ]
120 * New upstream version
122 - LACP bonds no longer fall back to balance-slb when negotiations fail.
123 Instead they drop traffic.
124 - The default bond_mode changed from SLB to active-backup, to protect
125 unsuspecting users from the significant risks of SLB bonds (which are
126 documented in vswitchd/INTERNALS).
127 - Load balancing can be disabled by setting the bond-rebalance-interval
130 - Added support for bitwise matching on TCP and UDP ports.
131 See ovs-ofctl(8) for more information.
132 - NXM flow dumps now include times elapsed toward idle and hard
134 - Added an OpenFlow extension NXT_SET_ASYNC_CONFIG that allows
135 controllers more precise control over which OpenFlow messages they
136 receive asynchronously.
137 - New "fin_timeout" action.
138 - Added "fin_timeout" support to "learn" action.
139 - The default MAC learning timeout has been increased from 60 seconds
140 to 300 seconds. The MAC learning timeout is now configurable.
141 - When QoS settings for an interface do not configure a default queue
142 (queue 0), Open vSwitch now uses a default configuration for that
143 queue, instead of dropping all packets as in previous versions.
144 - Logging to console and file will have UTC timestamp as a default for all
145 the daemons. An example of the default format is 2012-01-27T16:35:17Z.
146 ovs-appctl can be used to change the default format as before.
147 - New support for limiting the number of flows in an OpenFlow flow
148 table, with configurable policy for evicting flows upon
149 overflow. See the Flow_Table table in ovs-vswitch.conf.db(5)
150 for more information.
151 - New "enable-async-messages" column in the Controller table. If set to
152 false, OpenFlow connections to the controller will initially have all
153 asynchronous messages disabled, overriding normal OpenFlow behavior.
154 - ofproto-provider interface:
155 - "struct rule" has a new member "used" that ofproto implementations
156 should maintain by updating with ofproto_rule_update_used().
158 - The new option --timestamp causes the "monitor" command to print
159 a timestamp with every update.
160 - CFM module CCM broadcasts can now be tagged with an 802.1p priority.
162 -- Open vSwitch team <dev@openvswitch.org> Fri, 24 Feb 2012 11:12:48 +0900
164 openvswitch (1.5.0-1) unstable; urgency=low
165 [ Open vSwitch team ]
166 * New upstream version
168 - Added support for querying, modifying, and deleting flows
169 based on flow cookie when using NXM.
170 - Added new NXM_PACKET_IN format.
172 - Added daemonization support to the monitor and snoop commands.
174 - The "find" command supports new set relational operators
175 {=}, {!=}, {<}, {>}, {<=}, and {>=}.
176 - ovsdb-tool now uses the typical database and schema installation
177 directories as defaults.
179 -- Open vSwitch team <dev@openvswitch.org> Fri, 01 June 2012 13:06:00 +0900
181 openvswitch (1.4.0+git20120426-1) unstable; urgency=low
183 * New upstream release fixing the following bugs:
184 o Broken log rotation.
185 o Use-after-free error when ports disappear.
186 o Minor memory leaks.
187 o Testsuite failures on big-endian architectures.
189 -- Ben Pfaff <pfaffben@debian.org> Thu, 26 Apr 2012 13:46:55 -0700
191 openvswitch (1.4.0+git20120321-1) unstable; urgency=low
193 * New upstream version including:
195 - ovs-vsctl: Allow "fake bridges" to be created for VLAN 0.
196 - vswitchd: Make the MAC entry aging time configurable.
197 - mac-learning: Increase MAC learning timeout to 300 seconds.
199 - netdev-linux: Fix use-after-free when netdev_dump_queues() deletes
201 - netlink-socket: Increase Netlink socket receive buffer size.
202 - ofproto: Fix code that keeps track of MTU.
203 - ovs-monitor-ipsec: Detect correctly IPSEC configuration changes
204 - bond: Incorrectly reported an error in appctl.
205 - socket-util: Unlink Unix domain sockets that bind but fail to connect.
206 - bridge: Remove unwanted ports at time of ofproto creation.
207 - dpif-linux: Make dpif_linux_port_query_by_name() query only one
209 - ofproto-dpif: Cleanup STP on ports when disabled on their bridge.
210 - configure: Try to extract kernel source directory from build Makefile.
211 - vswitchd: Always configure a default queue for QoS.
212 - ofproto-dpif: Don't output to in_port even if in_port is OFPP_LOCAL.
213 - sflow_agent: Use snprintf() in place of sprintf().
215 - Move PKI directory to FHS-compliant location. Closes: #661090.
216 Thanks to Andreas Beckmann <debian@abeckmann.de> for reporting
218 - Use a different way to avoid failing install without kernel module.
219 - Avoid unit test failure when doing "unofficial" builds.
220 - Bump standards-version to 3.9.3.
221 - Remove some useless files from the dkms package.
222 - Clean .pyc files in "clean" target.
223 - Remove po-debconf build dependency.
224 - Build-depend on python-all to pull in all Python versions.
225 - Add missing ${python:Depends} to openvswitch-test package.
226 - Improve long descriptions so as to better describe the packages.
227 - Bump debhelper compat level to 8 and make build-depends consistent.
228 - Fix exit status of openvswitch-switch init script "status" command.
229 - Use provided kernel source dir instead of host kernel version.
230 - Do not run "make" if "configure" fails during DKMS build.
231 - Look in /lib/modules instead of /usr/src for DKMS kernel sources.
232 - Fix dependencies for openvswitch-datapath-dkms package.
233 - Don't install Python modules for obsolete Python versions.
234 - Add dependency on ${misc:Depends} to openvswitch-test
235 o Documentation improvements:
236 - ovsdb-doc: Use minus sign in negative numbers in nroff output.
237 - ovsdb-doc: Convert '-' preceding a number as a minus sign, not a
239 - ovsdb-doc: Put NAME section into generated manpage.
240 - Fix typo in manpage.
241 - vswitchd: Document behavior of 802.1p priorities with VLAN splinters.
242 - netdev: Fix typo in error message.
243 - INSTALL.Linux: minor typo
245 * Many thanks to Thomas Goirand <zigo@debian.org> for contributing many
246 of the packaging fixes listed above.
248 * This version fixes most of the lintian errors described in bug
249 #663051, but a few remain, so this upload does not close that bug. I
250 believe that this upload should be suitable for downgrading that bug's
253 -- Ben Pfaff <pfaffben@debian.org> Wed, 21 Mar 2012 10:00:28 -0700
255 openvswitch (1.4.0-2+nmu1) unstable; urgency=low
257 * Non maintainer upload.
258 * Removes all patches in debian/patches, because they are patching stuff
259 inconditionally in debian/*, and this should be applied by default.
260 * Uses the correct ${kernel_source_dir} in debian/dkms.conf.in, so that
261 the kernel module builds as expected (Closes: #659685).
263 -- Thomas Goirand <zigo@debian.org> Thu, 08 Mar 2012 08:46:24 +0000
265 openvswitch (1.4.0-2) unstable; urgency=low
267 * Use explicit DKMS variable for kernel source directory
268 - 0001-debian-Fix-dependencies-for-openvswitch-datapath-dkm.patch
269 - 0002-debian-Look-in-lib-modules-instead-of-usr-src-for-DK.patch
270 - 0001-debian-Use-provided-kernel-source-dir.patch
271 - 0001-debian-Do-not-run-make-if-configure-fails-during-DKM.patch
273 * Don't install Python modules for obsolete Python versions
274 - 0001-debian-Don-t-install-Python-modules-for-obsolete-Pyt.patch
276 -- Simon Horman <horms@debian.org> Tue, 14 Feb 2012 11:43:13 +0900
278 openvswitch (1.4.0-1) unstable; urgency=low
279 [ Open vSwitch team ]
280 * New upstream version
281 - Compatible with Open vSwitch kernel module included in Linux 3.3.
282 - New "VLAN splinters" feature to work around buggy device drivers
283 in old Linux versions. (This feature is deprecated. When
284 broken device drivers are no longer in widespread use, we will
285 delete this feature.) See ovs-vswitchd.conf.db(5) for more
288 - Added ability to match on IPv6 flow label through NXM.
289 - Added ability to match on ECN bits in IPv4 and IPv6 through NXM.
290 - Added ability to match on TTL in IPv4 and IPv6 through NXM.
291 - Added ability to modify ECN bits in IPv4.
292 - Added ability to modify TTL in IPv4.
294 - Don't require the "normal" action to use mirrors. Traffic will
295 now be properly mirrored for any flows, regardless of their
297 - Track packet and byte statistics sent on mirrors.
299 - New "fdb/flush" command to flush bridge's MAC learning table.
301 - A new distributed testing tool that allows one to diagnose performance
302 and connectivity issues. This tool currently is not included in RH or
304 - RHEL packaging now supports integration with Red Hat network scripts.
305 - Debian: Depend on python (>= 2.7) | python-argparse instead of
306 python-argparse to avoid pulling in python2.6
309 -- Open vSwitch team <dev@openvswitch.org> Mon, 30 Jan 2012 23:36:00 +0000
311 openvswitch (1.3.0-1) unstable; urgency=low
312 [ Open vSwitch team ]
313 * New upstream version
315 - Added an OpenFlow extension which allows the "output" action to accept
317 - Added an OpenFlow extension for flexible learning.
318 - Bumped number of NXM registers from four to five.
320 - New "version" command to determine version of running daemon.
321 - If no argument is provided for "cfm/show", displays detailed
322 information about all interfaces with CFM enabled.
323 - If no argument is provided for "lacp/show", displays detailed
324 information about all ports with LACP enabled.
326 - The software switch now supports 255 OpenFlow tables, instead
327 of just one. By default, only table 0 is consulted, but the
328 new NXAST_RESUBMIT_TABLE action can look up in additional
329 tables. Tables 128 and above are reserved for use by the
330 switch itself; please use only tables 0 through 127.
331 - Add support for 802.1D spanning tree (STP).
332 - Fragment handling extensions:
333 - New OFPC_FRAG_NX_MATCH fragment handling mode, in which L4
334 fields are made available for matching in fragments with
336 - New NXM_NX_IP_FRAG match field for matching IP fragments (usable
337 via "ip_frag" in ovs-ofctl).
338 - New ovs-ofctl "get-frags" and "set-frags" commands to get and set
339 fragment handling policy.
340 - CAPWAP tunneling now supports an extension to transport a 64-key. By
341 default it remains compatible with the old version and other
342 standards-based implementations.
343 - Flow setups are now processed in a round-robin manner across ports
344 to prevent any single client from monopolizing the CPU and conducting
345 a denial of service attack.
346 - Added support for native VLAN tagging. A new "vlan_mode"
347 parameter can be set for "port". Possible values: "access",
348 "trunk", "native-tagged" and "native-untagged".
349 - test-openflowd has been removed. Please use ovs-vswitchd instead.
351 -- Open vSwitch team <dev@openvswitch.org> Mon, 09 Dec 2011 23:36:00 +0000
353 openvswitch (1.2.0-1) unstable; urgency=low
355 [ Open vSwitch team ]
356 * New upstream version
357 - New "ofproto" abstraction layer to ease porting to hardware
359 - Packaging for Red Hat Enterprise Linux 5.6 and 6.0.
360 - Datapath support for Linux kernels up to 3.0.
362 - New "bundle" and "bundle_load" action extensions.
364 - Implement table unique constraints.
365 - Support cooperative locking between callers.
367 - New "-s" option for "show" command prints packet and byte
368 counters for each port.
370 - New "--readd" option for "replace-flows".
372 - New "show" command to print an overview of configuration.
373 - New "comment" command to add remark that explains intentions.
374 - ovs-brcompatd has been rewritten to fix long-standing bugs.
375 - ovs-openflowd has been renamed test-openflowd and moved into the
376 tests directory. Its presence confused too many users. Please
377 use ovs-vswitchd instead.
378 - New ovs-benchmark utility to test flow setup performance.
379 - A new log level "off" has been added. Configuring a log facility
380 "off" prevents any messages from being logged to it. Previously,
381 "emer" was effectively "off" because no messages were ever logged at
382 level "emer". Now, errors that cause a process to exit are logged
384 - "configure" option --with-l26 has been renamed --with-linux, and
385 --with-l26-source has been renamed --with-linux-source. The old
386 names will be removed after the next release, so please update
388 - The "-2.6" suffix has been dropped from the datapath/linux-2.6 and
389 datapath/linux-2.6/compat-2.6 directories.
391 - Dropped support for "tun_id_from_cookie" OpenFlow extension.
392 Please use the extensible match extensions instead.
393 - Removed the Maintenance_Point and Monitor tables in an effort
394 to simplify 802.1ag configuration.
395 - Performance and scalability improvements
398 -- Open vSwitch team <dev@openvswitch.org> Wed, 03 Aug 2011 14:43:00 +0000
400 openvswitch (1.1.1-1) unstable; urgency=low
402 [ Open vSwitch team ]
406 * docs: Suppress warning marcro DD not defined
407 (upstream commit 58f870d0)
408 * debian: Make openvswitch depend on Python
409 (upstream commit aa41cb61)
410 * debian: Don't begin openvswitch-pki description with article.
411 (upstream commit bc6bb66)
412 * Debian: Add ${misc:Depends} dependency to python-openvswitch
413 * Debian: Update standards version from 3.9.1 to 3.9.2
414 * Debian: ${source:Version} dependency on python openvswitch
415 * Debian: ${source:Version} dependency for python openvswitch
416 * Switch to dpkg-source 3.0 (quilt) format
417 - For local non-debian/ patches (above)
419 -- Simon Horman <horms@debian.org> Wed, 15 Jun 2011 10:46:15 +0900
421 openvswitch (1.1.0-1) unstable; urgency=low
423 [ Open vSwitch team ]
424 * New upstream version
425 - Ability to define policies over IPv6
428 - Support for extensible match extensions to OpenFlow
430 - Support for HFSC qdisc.
431 - Queue used by in-band control can now be configured.
433 - Kernel<->userspace interface has been reworked and should be
434 close to a stable ABI now.
435 - "Port group" concept has been dropped.
436 - GRE over IPSEC tunnels
438 - New active backup bonding mode.
439 - New L4 hashing support when LACP is enabled.
440 - Source MAC hash now includes VLAN field also.
442 - Greatly improved handling of large flow tables
444 - "show" command now prints full vport configuration.
445 - "dump-groups" command removed since kernel support for
446 port groups was dropped.
448 - New commands for working with the new Managers table.
449 - "list" command enhanced with new formatting options and --columns
451 - "get" command now accepts new --id option.
452 - New "find" command.
454 - New "queue-stats" command for printing queue stats.
455 - New commands "replace-flows" and "diff-flows".
456 - Commands to add and remove flows can now read from files.
457 - New --flow-format option to enable or disable NXM.
458 - New --more option to increase OpenFlow message verbosity.
459 - Removed "tun-cookie" command, which is no longer useful.
460 - ovs-controller enhancements for testing various features.
461 - New ovs-vlan-test command for testing for Linux kernel driver VLAN
462 bugs. New ovs-vlan-bug-workaround command for enabling and
463 disabling a workaround for these driver bugs.
465 - "Resubmit" actions now update flow statistics.
466 - New "register" extension for use in matching and actions, via NXM.
467 - New "multipath" experimental action extension.
468 - New support for matching multicast Ethernet frames, via NXM.
469 - New extension for OpenFlow vendor error codes.
470 - New extension to set the QoS output queue without actually
471 sending to an output port.
472 - Open vSwitch now reports a single flow table, instead of
473 separate hash and wildcard tables. This better models the
474 current implementation.
475 - New experimental "note" action.
476 - New "ofproto/trace" ovs-appctl command and associated utilities
477 to ease debugging complex flow tables.
479 - Schema documentation now includes an entity-relationship diagram.
480 - The database is now garbage collected. In most tables,
481 unreferenced rows will be deleted automatically.
482 - Many tables now include statistics updated periodically by
483 ovs-vswitchd or ovsdb-server.
484 - Every table now has an "external-ids" column for use by OVS
486 - There is no default controller anymore. Each bridge must have its
487 controller individually specified.
488 - The "fail-mode" is now a property of a Bridge instead of a Controller.
489 - New versioning and checksum features.
490 - New Managers table and manager_options column in Open_vSwitch table
491 for specifying managers. The old "managers" column in the
492 Open_vSwitch table has been removed.
493 - Many "name" columns are now immutable.
495 - Dropped support for XenServer pre-5.6.100.
496 - Dropped support for Linux pre-2.6.18.
497 - Dropped controller discovery support.
498 - Dropped "ovs-ofctl status" and the OpenFlow extension that it used.
499 Statistics reporting in the database is a rough equivalent.
500 - Dropped the "corekeeper" package (now separate, at
501 http://openvswitch.org/cgi-bin/gitweb.cgi?p=corekeeper).
502 - Performance and scalability improvements
506 * Add the following fixes from upstream branch-1.1
507 - 7f1aca9 dpif-linux: Avoid logging error on ENOENT in
508 dpif_linux_is_internal_device().
509 - 8996f83 dpif-linux: Avoid segfault on netdev_get_stats() without kernel
511 - 002d4a3 vswitch: Improve schema documentation.
512 - 58bd294 cfm: Fix broken fault logic.
513 - c042664 bridge: Run once before configuring CFM.
514 * Switch to dpkg-source 3.0 (quilt) format
516 -- Simon Horman <horms@debian.org> Wed, 27 Apr 2011 17:11:10 +0900
518 openvswitch (1.1.0~pre2.g2.ea763e0e-1) unstable; urgency=low
520 * Git snapshot, including
521 - tests: Fix Y2011 bug in testsuite
524 -- Simon Horman <horms@debian.org> Wed, 12 Jan 2011 08:34:35 +0900
526 openvswitch (1.1.0~pre2.g1.bbe8d06e-1) unstable; urgency=low
530 -- Simon Horman <horms@debian.org> Thu, 06 Jan 2011 11:11:55 +0900
532 openvswitch (1.1.0~pre2-5) unstable; urgency=low
534 * Open vSwitch only works on Linux so set
535 the Architecture of binary packages to linux-any accordingly
537 -- Simon Horman <horms@debian.org> Tue, 23 Nov 2010 07:55:19 +0900
539 openvswitch (1.1.0~pre2-4) unstable; urgency=low
541 * Add procps to Build-Depends
544 -- Simon Horman <horms@debian.org> Tue, 16 Nov 2010 06:46:17 +0900
546 openvswitch (1.1.0~pre2-3) unstable; urgency=low
548 * Remove the corekeeper package as it isn't strongly related
549 to Open vSwitch. It has subsequently been broken off into
550 a separate source repository and may be uploaded as its
551 own debian source package.
552 http://openvswitch.org/cgi-bin/gitweb.cgi?p=corekeeper;a=summary
554 * Avoid the use of long socket names.
555 (closes: #602891, closes: #602911)
557 -- Simon Horman <horms@debian.org> Thu, 11 Nov 2010 06:35:05 +0900
559 openvswitch (1.1.0~pre2-2) unstable; urgency=low
561 * Clarify licensing of files in xenserver/
563 -- Simon Horman <horms@debian.org> Thu, 23 Sep 2010 10:56:18 +0900
565 openvswitch (1.1.0~pre2-1) unstable; urgency=low
567 * New upstream version
570 -- Simon Horman <horms@debian.org> Wed, 15 Sep 2010 18:28:59 +0900
572 openvswitch (1.1.0~pre1-1) unstable; urgency=low
574 * New upstream version
575 - OpenFlow 1.0 slicing (QoS) functionality
576 - Python bindings for configuration database (no write support)
577 - Performance and scalability improvements
580 -- Open vSwitch team <dev@openvswitch.org> Tue, 31 Aug 2010 23:20:00 +0000
582 openvswitch (1.0.1-1) unstable; urgency=low
584 * New upstream version.
586 -- Open vSwitch team <dev@openvswitch.org> Mon, 17 May 2010 10:36:00 +0000