ofp-msgs: Add support for ONF extension messages.
[cascardo/ovs.git] / include / openflow / openflow-common.h
1 /* Copyright (c) 2008, 2011, 2012, 2013, 2014, 2016 The Board of Trustees of The Leland Stanford
2  * Junior University
3  *
4  * We are making the OpenFlow specification and associated documentation
5  * (Software) available for public use and benefit with the expectation
6  * that others will use, modify and enhance the Software and contribute
7  * those enhancements back to the community. However, since we would
8  * like to make the Software available for broadest use, with as few
9  * restrictions as possible permission is hereby granted, free of
10  * charge, to any person obtaining a copy of this Software to deal in
11  * the Software under the copyrights without restriction, including
12  * without limitation the rights to use, copy, modify, merge, publish,
13  * distribute, sublicense, and/or sell copies of the Software, and to
14  * permit persons to whom the Software is furnished to do so, subject to
15  * the following conditions:
16  *
17  * The above copyright notice and this permission notice shall be
18  * included in all copies or substantial portions of the Software.
19  *
20  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
21  * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
22  * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
23  * NONINFRINGEMENT.  IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
24  * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
25  * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
26  * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
27  * SOFTWARE.
28  *
29  * The name and trademarks of copyright holder(s) may NOT be used in
30  * advertising or publicity pertaining to the Software or any
31  * derivatives without specific, written prior permission.
32  */
33
34 /*
35  * Copyright (c) 2008-2014 Nicira, Inc.
36  *
37  * Licensed under the Apache License, Version 2.0 (the "License");
38  * you may not use this file except in compliance with the License.
39  * You may obtain a copy of the License at:
40  *
41  *     http://www.apache.org/licenses/LICENSE-2.0
42  *
43  * Unless required by applicable law or agreed to in writing, software
44  * distributed under the License is distributed on an "AS IS" BASIS,
45  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
46  * See the License for the specific language governing permissions and
47  * limitations under the License.
48  */
49
50 #ifndef OPENFLOW_COMMON_H
51 #define OPENFLOW_COMMON_H 1
52
53 #include <openvswitch/types.h>
54
55 #ifdef SWIG
56 #define OFP_ASSERT(EXPR)        /* SWIG can't handle OFP_ASSERT. */
57 #elif !defined(__cplusplus)
58 /* Build-time assertion for use in a declaration context. */
59 #define OFP_ASSERT(EXPR)                                                \
60         extern int (*build_assert(void))[ sizeof(struct {               \
61                     unsigned int build_assert_failed : (EXPR) ? 1 : -1; })]
62 #else /* __cplusplus */
63 #include <boost/static_assert.hpp>
64 #define OFP_ASSERT BOOST_STATIC_ASSERT
65 #endif /* __cplusplus */
66
67 /* Version number:
68  * Non-experimental versions released: 0x01 0x02
69  * Experimental versions released: 0x81 -- 0x99
70  */
71 /* The most significant bit being set in the version field indicates an
72  * experimental OpenFlow version.
73  */
74 enum ofp_version {
75     OFP10_VERSION = 0x01,
76     OFP11_VERSION = 0x02,
77     OFP12_VERSION = 0x03,
78     OFP13_VERSION = 0x04,
79     OFP14_VERSION = 0x05,
80     OFP15_VERSION = 0x06
81 };
82
83 /* Vendor (aka experimenter) IDs.
84  *
85  * These are used in various places in OpenFlow to identify an extension
86  * defined by some vendor, as opposed to a standardized part of the core
87  * OpenFlow protocol.
88  *
89  * Vendor IDs whose top 8 bits are 0 hold an Ethernet OUI in their low 24 bits.
90  * The Open Networking Foundation assigns vendor IDs whose top 8 bits are
91  * nonzero.
92  *
93  * A few vendor IDs are special:
94  *
95  *    - OF_VENDOR_ID is not a real vendor ID and does not appear in the
96  *      OpenFlow protocol itself.  It can occasionally be useful within Open
97  *      vSwitch to identify a standardized part of OpenFlow.
98  *
99  *    - ONF_VENDOR_ID is being used within the ONF "extensibility" working
100  *      group to identify extensions being proposed for standardization.
101  *
102  * The list is sorted numerically.
103  */
104 #define OF_VENDOR_ID    0
105 #define HPL_VENDOR_ID   0x000004EA /* HP Labs. */
106 #define NTR_VENDOR_ID   0x0000154d /* Netronome. */
107 #define NTR_COMPAT_VENDOR_ID   0x00001540 /* Incorrect value used in v2.4. */
108 #define NX_VENDOR_ID    0x00002320 /* Nicira. */
109 #define ONF_VENDOR_ID   0x4f4e4600 /* Open Networking Foundation. */
110
111 #define OFP_MAX_TABLE_NAME_LEN 32
112 #define OFP_MAX_PORT_NAME_LEN  16
113
114 #define OFP_OLD_PORT  6633
115 #define OFP_PORT  6653
116
117 #define OFP_DEFAULT_MISS_SEND_LEN   128
118
119 /* Values below this cutoff are 802.3 packets and the two bytes
120  * following MAC addresses are used as a frame length.  Otherwise, the
121  * two bytes are used as the Ethernet type.
122  */
123 #define OFP_DL_TYPE_ETH2_CUTOFF   0x0600
124
125 /* Value of dl_type to indicate that the frame does not include an
126  * Ethernet type.
127  */
128 #define OFP_DL_TYPE_NOT_ETH_TYPE  0x05ff
129
130 /* Value used in "idle_timeout" and "hard_timeout" to indicate that the entry
131  * is permanent. */
132 #define OFP_FLOW_PERMANENT 0
133
134 /* By default, choose a priority in the middle. */
135 #define OFP_DEFAULT_PRIORITY 0x8000
136
137
138 /* Header on all OpenFlow packets. */
139 struct ofp_header {
140     uint8_t version;    /* An OpenFlow version number, e.g. OFP10_VERSION. */
141     uint8_t type;       /* One of the OFPT_ constants. */
142     ovs_be16 length;    /* Length including this ofp_header. */
143     ovs_be32 xid;       /* Transaction id associated with this packet.
144                            Replies use the same id as was in the request
145                            to facilitate pairing. */
146 };
147 OFP_ASSERT(sizeof(struct ofp_header) == 8);
148
149 /* OFPT_ERROR: Error message (datapath -> controller). */
150 struct ofp_error_msg {
151     ovs_be16 type;
152     ovs_be16 code;
153     uint8_t data[0];          /* Variable-length data.  Interpreted based
154                                  on the type and code. */
155 };
156 OFP_ASSERT(sizeof(struct ofp_error_msg) == 4);
157
158 enum ofp_config_flags {
159     /* Handling of IP fragments. */
160     OFPC_FRAG_NORMAL   = 0,  /* No special handling for fragments. */
161     OFPC_FRAG_DROP     = 1,  /* Drop fragments. */
162     OFPC_FRAG_REASM    = 2,  /* Reassemble (only if OFPC_IP_REASM set). */
163     OFPC_FRAG_NX_MATCH = 3,  /* Make first fragments available for matching. */
164     OFPC_FRAG_MASK     = 3,
165
166     /* OFPC_INVALID_TTL_TO_CONTROLLER is deprecated in OpenFlow 1.3 */
167
168     /* TTL processing - applicable for IP and MPLS packets. */
169     OFPC_INVALID_TTL_TO_CONTROLLER = 1 << 2, /* Send packets with invalid TTL
170                                                 to the controller. */
171 };
172
173 /* Switch configuration. */
174 struct ofp_switch_config {
175     ovs_be16 flags;             /* OFPC_* flags. */
176     ovs_be16 miss_send_len;     /* Max bytes of new flow that datapath should
177                                    send to the controller. */
178 };
179 OFP_ASSERT(sizeof(struct ofp_switch_config) == 4);
180
181
182 /* Common flags to indicate behavior of the physical port.  These flags are
183  * used in ofp_port to describe the current configuration.  They are used in
184  * the ofp_port_mod message to configure the port's behavior.
185  */
186 enum ofp_port_config {
187     OFPPC_PORT_DOWN    = 1 << 0,  /* Port is administratively down. */
188
189     OFPPC_NO_RECV      = 1 << 2,  /* Drop all packets received by port. */
190     OFPPC_NO_FWD       = 1 << 5,  /* Drop packets forwarded to port. */
191     OFPPC_NO_PACKET_IN = 1 << 6   /* Do not send packet-in msgs for port. */
192 };
193
194 /* Common current state of the physical port.  These are not configurable from
195  * the controller.
196  */
197 enum ofp_port_state {
198     OFPPS_LINK_DOWN    = 1 << 0,  /* No physical link present. */
199 };
200
201 /* Common features of physical ports available in a datapath. */
202 enum ofp_port_features {
203     OFPPF_10MB_HD    = 1 << 0,  /* 10 Mb half-duplex rate support. */
204     OFPPF_10MB_FD    = 1 << 1,  /* 10 Mb full-duplex rate support. */
205     OFPPF_100MB_HD   = 1 << 2,  /* 100 Mb half-duplex rate support. */
206     OFPPF_100MB_FD   = 1 << 3,  /* 100 Mb full-duplex rate support. */
207     OFPPF_1GB_HD     = 1 << 4,  /* 1 Gb half-duplex rate support. */
208     OFPPF_1GB_FD     = 1 << 5,  /* 1 Gb full-duplex rate support. */
209     OFPPF_10GB_FD    = 1 << 6,  /* 10 Gb full-duplex rate support. */
210 };
211
212 /* Generic OpenFlow property header, as used by various messages in OF1.3+, and
213  * especially in OF1.4.
214  *
215  * The OpenFlow specs prefer to define a new structure with a specialized name
216  * each time this property structure comes up: struct
217  * ofp_port_desc_prop_header, struct ofp_controller_status_prop_header, struct
218  * ofp_table_mod_prop_header, and more.  They're all the same, so it's easier
219  * to unify them.
220  */
221 struct ofp_prop_header {
222     ovs_be16 type;
223     ovs_be16 len;
224     /* Followed by:
225      *     - 'len - 4' bytes of payload.
226      *     - PAD_SIZE(len, 8) bytes of zeros. */
227 };
228 OFP_ASSERT(sizeof(struct ofp_prop_header) == 4);
229
230 /* Generic OpenFlow experimenter property header.
231  *
232  * Again the OpenFlow specs define this over and over again and it's easier to
233  * unify them. */
234 struct ofp_prop_experimenter {
235     ovs_be16 type;          /* Generally 0xffff (in one case 0xfffe). */
236     ovs_be16 len;           /* Length in bytes of this property. */
237     ovs_be32 experimenter;  /* Experimenter ID which takes the same form as
238                              * in struct ofp_experimenter_header. */
239     ovs_be32 exp_type;      /* Experimenter defined. */
240     /* Followed by:
241      *     - 'len - 12' bytes of payload.
242      *     - PAD_SIZE(len, 8) bytes of zeros. */
243 };
244 OFP_ASSERT(sizeof(struct ofp_prop_experimenter) == 12);
245
246 /* Switch features. */
247 struct ofp_switch_features {
248     ovs_be64 datapath_id;   /* Datapath unique ID.  The lower 48-bits are for
249                                a MAC address, while the upper 16-bits are
250                                implementer-defined. */
251
252     ovs_be32 n_buffers;     /* Max packets buffered at once. */
253
254     uint8_t n_tables;       /* Number of tables supported by datapath. */
255     uint8_t auxiliary_id;   /* OF 1.3: Identify auxiliary connections */
256     uint8_t pad[2];         /* Align to 64-bits. */
257
258     /* Features. */
259     ovs_be32 capabilities;  /* OFPC_*, OFPC10_*, OFPC11_*, OFPC12_*. */
260     ovs_be32 actions;       /* Bitmap of supported "ofp_action_type"s.
261                              * DEPRECATED in OpenFlow 1.1 */
262
263     /* Followed by an array of struct ofp10_phy_port or struct ofp11_port
264      * structures.  The number is inferred from header.length.
265      * REMOVED in OpenFlow 1.3 */
266 };
267 OFP_ASSERT(sizeof(struct ofp_switch_features) == 24);
268
269 /* Common capabilities supported by the datapath (struct ofp_switch_features,
270  * member capabilities). */
271 enum ofp_capabilities {
272     OFPC_FLOW_STATS     = 1 << 0,  /* Flow statistics. */
273     OFPC_TABLE_STATS    = 1 << 1,  /* Table statistics. */
274     OFPC_PORT_STATS     = 1 << 2,  /* Port statistics. */
275     OFPC_IP_REASM       = 1 << 5,  /* Can reassemble IP fragments. */
276     OFPC_QUEUE_STATS    = 1 << 6,  /* Queue statistics. */
277     OFPC_ARP_MATCH_IP   = 1 << 7   /* Match IP addresses in ARP
278                                       pkts. */
279 };
280
281 /* Why is this packet being sent to the controller? */
282 enum ofp_packet_in_reason {
283     /* Standard reasons. */
284     OFPR_NO_MATCH,          /* No matching flow. */
285     OFPR_ACTION,            /* Action explicitly output to controller. */
286     OFPR_INVALID_TTL,       /* Packet has invalid TTL. */
287     OFPR_ACTION_SET,        /* Output to controller in action set */
288     OFPR_GROUP,             /* Output to controller in group bucket */
289     OFPR_PACKET_OUT,        /* Output to controller in packet-out */
290
291 #define OFPR10_BITS                                                     \
292     ((1u << OFPR_NO_MATCH) | (1u << OFPR_ACTION) | (1u << OFPR_INVALID_TTL))
293 #define OFPR14_BITS                                                     \
294     (OFPR10_BITS |                                                      \
295      (1u << OFPR_ACTION_SET) | (1u << OFPR_GROUP) | (1u << OFPR_PACKET_OUT))
296
297     /* Nonstandard reason--not exposed via OpenFlow. */
298     OFPR_EXPLICIT_MISS,
299     OFPR_IMPLICIT_MISS,
300
301     OFPR_N_REASONS
302 };
303
304 enum ofp_flow_mod_command {
305     OFPFC_ADD,              /* New flow. */
306     OFPFC_MODIFY,           /* Modify all matching flows. */
307     OFPFC_MODIFY_STRICT,    /* Modify entry strictly matching wildcards */
308     OFPFC_DELETE,           /* Delete all matching flows. */
309     OFPFC_DELETE_STRICT     /* Strictly match wildcards and priority. */
310 };
311
312 enum ofp_flow_mod_flags {
313     OFPFF_SEND_FLOW_REM = 1 << 0,  /* Send flow removed message when flow
314                                     * expires or is deleted. */
315     OFPFF_CHECK_OVERLAP = 1 << 1,  /* Check for overlapping entries first. */
316 };
317
318 /* Why was this flow removed? */
319 enum ofp_flow_removed_reason {
320     OFPRR_IDLE_TIMEOUT,         /* Flow idle time exceeded idle_timeout. */
321     OFPRR_HARD_TIMEOUT,         /* Time exceeded hard_timeout. */
322     OFPRR_DELETE,               /* Evicted by a DELETE flow mod. */
323     OFPRR_GROUP_DELETE,         /* Group was removed. */
324     OFPRR_METER_DELETE,         /* Meter was removed. */
325     OFPRR_EVICTION,             /* Switch eviction to free resources. */
326
327 #define OFPRR10_BITS                            \
328     ((1u << OFPRR_IDLE_TIMEOUT) |               \
329      (1u << OFPRR_HARD_TIMEOUT) |               \
330      (1u << OFPRR_DELETE))
331 #define OFPRR14_BITS                            \
332     (OFPRR10_BITS |                             \
333      (1u << OFPRR_GROUP_DELETE) |               \
334      (1u << OFPRR_METER_DELETE) |               \
335      (1u << OFPRR_EVICTION))
336
337     OVS_OFPRR_NONE              /* OVS internal_use only, keep last!. */
338 };
339
340 /* What changed about the physical port */
341 enum ofp_port_reason {
342     OFPPR_ADD,              /* The port was added. */
343     OFPPR_DELETE,           /* The port was removed. */
344     OFPPR_MODIFY,           /* Some attribute of the port has changed. */
345
346 #define OFPPR_BITS ((1u << OFPPR_ADD) |         \
347                     (1u << OFPPR_DELETE) |      \
348                     (1u << OFPPR_MODIFY))
349
350     OFPPR_N_REASONS         /* Denotes number of reasons. */
351 };
352
353 /* A physical port has changed in the datapath */
354 struct ofp_port_status {
355     uint8_t reason;          /* One of OFPPR_*. */
356     uint8_t pad[7];          /* Align to 64-bits. */
357     /* Followed by struct ofp10_phy_port, struct ofp11_port, or struct
358      * ofp14_port.  */
359 };
360 OFP_ASSERT(sizeof(struct ofp_port_status) == 8);
361
362 enum ofp_stats_reply_flags {
363     OFPSF_REPLY_MORE  = 1 << 0  /* More replies to follow. */
364 };
365
366 #define DESC_STR_LEN   256
367 #define SERIAL_NUM_LEN 32
368 /* Body of reply to OFPST_DESC request.  Each entry is a NULL-terminated ASCII
369  * string. */
370 struct ofp_desc_stats {
371     char mfr_desc[DESC_STR_LEN];       /* Manufacturer description. */
372     char hw_desc[DESC_STR_LEN];        /* Hardware description. */
373     char sw_desc[DESC_STR_LEN];        /* Software description. */
374     char serial_num[SERIAL_NUM_LEN];   /* Serial number. */
375     char dp_desc[DESC_STR_LEN];        /* Human readable description of
376                                           the datapath. */
377 };
378 OFP_ASSERT(sizeof(struct ofp_desc_stats) == 1056);
379
380 /* Reply to OFPST_AGGREGATE request. */
381 struct ofp_aggregate_stats_reply {
382     ovs_32aligned_be64 packet_count; /* Number of packets in flows. */
383     ovs_32aligned_be64 byte_count;   /* Number of bytes in flows. */
384     ovs_be32 flow_count;      /* Number of flows. */
385     uint8_t pad[4];           /* Align to 64 bits. */
386 };
387 OFP_ASSERT(sizeof(struct ofp_aggregate_stats_reply) == 24);
388
389 /* The match type indicates the match structure (set of fields that compose the
390  * match) in use. The match type is placed in the type field at the beginning
391  * of all match structures. The "OpenFlow Extensible Match" type corresponds
392  * to OXM TLV format described below and must be supported by all OpenFlow
393  * switches. Extensions that define other match types may be published on the
394  * ONF wiki. Support for extensions is optional.
395  */
396 enum ofp_match_type {
397     OFPMT_STANDARD = 0,         /* The match fields defined in the ofp11_match
398                                    structure apply */
399     OFPMT_OXM = 1,              /* OpenFlow Extensible Match */
400 };
401
402 /* Group numbering. Groups can use any number up to OFPG_MAX. */
403 enum ofp_group {
404     /* Last usable group number. */
405     OFPG_MAX        = 0xffffff00,
406
407     /* Fake groups. */
408     OFPG_ALL        = 0xfffffffc,  /* All groups, for group delete commands. */
409     OFPG_ANY        = 0xffffffff   /* Wildcard, for flow stats requests. */
410 };
411
412 /* Group configuration flags */
413 enum ofp_group_capabilities {
414     OFPGFC_SELECT_WEIGHT   = 1 << 0, /* Support weight for select groups */
415     OFPGFC_SELECT_LIVENESS = 1 << 1, /* Support liveness for select groups */
416     OFPGFC_CHAINING        = 1 << 2, /* Support chaining groups */
417     OFPGFC_CHAINING_CHECKS = 1 << 3, /* Check chaining for loops and delete */
418 };
419
420 enum ofp_hello_elem_type {
421     OFPHET_VERSIONBITMAP          = 1, /* Bitmap of version supported. */
422 };
423
424 /* Common header for all Hello Elements */
425 struct ofp_hello_elem_header {
426     ovs_be16    type;        /* One of OFPHET_*. */
427     ovs_be16    length;      /* Length in bytes of this element. */
428 };
429 OFP_ASSERT(sizeof(struct ofp_hello_elem_header) == 4);
430
431 /* Table numbering. Tables can use any number up to OFPT_MAX. */
432 enum ofp_table {
433     /* Last usable table number. */
434     OFPTT_MAX = 0xfe,
435
436     /* Fake tables. */
437     OFPTT_ALL = 0xff         /* Wildcard table used for table config,
438                                 flow stats and flow deletes. */
439 };
440
441 enum ofp_table_config {
442     /* OpenFlow 1.1 and 1.2 defined this field as shown.
443      * OpenFlow 1.3 and later mark this field as deprecated, but have not
444      * reused it for any new purpose. */
445     OFPTC11_TABLE_MISS_CONTROLLER = 0 << 0, /* Send to controller. */
446     OFPTC11_TABLE_MISS_CONTINUE   = 1 << 0, /* Go to next table, like OF1.0. */
447     OFPTC11_TABLE_MISS_DROP       = 2 << 0, /* Drop the packet. */
448     OFPTC11_TABLE_MISS_MASK       = 3 << 0,
449
450     /* OpenFlow 1.4. */
451     OFPTC14_EVICTION              = 1 << 2, /* Allow table to evict flows. */
452     OFPTC14_VACANCY_EVENTS        = 1 << 3, /* Enable vacancy events. */
453 };
454
455 #endif /* openflow/openflow-common.h */