rhel: support persistent mac addresses on OVS bridges
[cascardo/ovs.git] / rhel / etc_sysconfig_network-scripts_ifup-ovs
1 #!/bin/bash
2
3 # Copyright (c) 2011 Alexey I. Froloff.
4 #
5 # Licensed under the Apache License, Version 2.0 (the "License");
6 # you may not use this file except in compliance with the License.
7 # You may obtain a copy of the License at:
8 #
9 #     http://www.apache.org/licenses/LICENSE-2.0
10 #
11 # Unless required by applicable law or agreed to in writing, software
12 # distributed under the License is distributed on an "AS IS" BASIS,
13 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
14 # See the License for the specific language governing permissions and
15 # limitations under the License.
16
17 . /etc/init.d/functions
18
19 cd /etc/sysconfig/network-scripts
20 . ./network-functions
21
22 [ -f ../network ] && . ../network
23
24 CONFIG=${1}
25 TIMEOUT=10
26
27 need_config ${CONFIG}
28
29 source_config
30
31 OTHERSCRIPT="/etc/sysconfig/network-scripts/ifup-${REAL_DEVICETYPE}"
32
33 if [ ! -x ${OTHERSCRIPT} ]; then
34         OTHERSCRIPT="/etc/sysconfig/network-scripts/ifup-eth"
35 fi
36
37 check_recursion ()
38 {
39         [ -n "${UPPEDSTACK}" ] && for _r in ${UPPEDSTACK}; do
40                 [ "$_r" = "$1" ] && return 1
41         done
42
43         return 0
44 }
45
46 ifup_ovs_bridge ()
47 {
48         if ovs-vsctl br-exists "${OVS_BRIDGE}"; then :; else
49                 /sbin/ifup "${OVS_BRIDGE}"
50         fi
51 }
52
53 if [ -z "${UPPEDSTACK}" ]; then
54         UPPEDSTACK="${DEVICE}"
55 fi
56
57 [ -n "${OVSREQUIRES}" ] && for _i in ${OVSREQUIRES}; do
58         if ( check_recursion "$_i" ); then
59                 UPPEDSTACK="${UPPEDSTACK} $_i" /sbin/ifup "$_i"
60         fi
61 done
62
63 SERVICE_UNIT=/usr/lib/systemd/system/openvswitch-nonetwork.service
64 if [ -f $SERVICE_UNIT ] && [ -x /usr/bin/systemctl ]; then
65         if ! systemctl --quiet is-active openvswitch-nonetwork.service; then
66                 systemctl start openvswitch-nonetwork.service
67         fi
68 else
69         if [ ! -f /var/lock/subsys/openvswitch ]; then
70                 /sbin/service openvswitch start
71         fi
72 fi
73
74 case "$TYPE" in
75         OVSBridge)
76                 # If bridge already exists and is up, it has been configured through
77                 # other cases like OVSPort, OVSIntPort and OVSBond. If it is down or
78                 # it does not exist, create it. It is possible for a bridge to exist
79                 # because it remained in the OVSDB for some reason, but it won't be up.
80                 if check_device_down "${DEVICE}"; then
81                         ovs-vsctl -t ${TIMEOUT} -- --may-exist add-br "$DEVICE" $OVS_OPTIONS \
82                         ${OVS_EXTRA+-- $OVS_EXTRA} \
83                         ${STP+-- set bridge "$DEVICE" stp_enable="${STP}"}
84                 else
85                         OVSBRIDGECONFIGURED="yes"
86                 fi
87
88                 # If MACADDR is provided in the interface configuration file,
89                 # we need to set it using ovs-vsctl; setting it with the "ip"
90                 # command in ifup-eth does not make the change persistent.
91                 if [ -n "$MACADDR" ]; then
92                         ovs-vsctl -t ${TIMEOUT} -- set bridge "$DEVICE" \
93                                 other-config:hwaddr="$MACADDR"
94                 fi
95
96                 # When dhcp is enabled, the assumption is that there will be a port to
97                 # attach (otherwise, we can't reach out for dhcp). So, we do not
98                 # configure the bridge through rhel's ifup infrastructure unless
99                 # it is being configured after the port has been configured.
100                 # The "OVSINTF" is set only after the port is configured.
101                 if [ "${OVSBOOTPROTO}" = "dhcp" ] && [ -n "${OVSINTF}" ]; then
102                         case " ${OVSDHCPINTERFACES} " in
103                                 *" ${OVSINTF} "*)
104                                         BOOTPROTO=dhcp ${OTHERSCRIPT} ${CONFIG}
105                                 ;;
106                         esac
107                 fi
108
109                 # When dhcp is not enabled, it is possible that someone may want
110                 # a standalone bridge (i.e it may not have any ports). Configure it.
111                 if [ "${OVSBOOTPROTO}" != "dhcp" ] && [ -z "${OVSINTF}" ] && \
112                         [ "${OVSBRIDGECONFIGURED}" != "yes" ]; then
113                         ${OTHERSCRIPT} ${CONFIG}
114                 fi
115                 exit 0
116                 ;;
117         OVSPort)
118                 ifup_ovs_bridge
119                 ${OTHERSCRIPT} ${CONFIG} ${2}
120                 ovs-vsctl -t ${TIMEOUT} -- --may-exist add-port "$OVS_BRIDGE" "$DEVICE" $OVS_OPTIONS ${OVS_EXTRA+-- $OVS_EXTRA}
121                 OVSINTF=${DEVICE} /sbin/ifup "$OVS_BRIDGE"
122                 ;;
123         OVSIntPort)
124                 ifup_ovs_bridge
125                 ovs-vsctl -t ${TIMEOUT} -- --may-exist add-port "$OVS_BRIDGE" "$DEVICE" $OVS_OPTIONS -- set Interface "$DEVICE" type=internal ${OVS_EXTRA+-- $OVS_EXTRA}
126                 if [ -n "${OVSDHCPINTERFACES}" ]; then
127                         for _iface in ${OVSDHCPINTERFACES}; do
128                                 /sbin/ifup ${_iface}
129                         done
130                 fi
131                 BOOTPROTO="${OVSBOOTPROTO}" ${OTHERSCRIPT} ${CONFIG} ${2}
132                 ;;
133         OVSBond)
134                 ifup_ovs_bridge
135                 for _iface in $BOND_IFACES; do
136                         /sbin/ifup ${_iface}
137                 done
138                 ovs-vsctl -t ${TIMEOUT} -- --fake-iface add-bond "$OVS_BRIDGE" "$DEVICE" ${BOND_IFACES} $OVS_OPTIONS ${OVS_EXTRA+-- $OVS_EXTRA}
139                 ${OTHERSCRIPT} ${CONFIG} ${2}
140                 OVSINTF=${DEVICE} /sbin/ifup "$OVS_BRIDGE"
141                 ;;
142         OVSTunnel)
143                 ifup_ovs_bridge
144                 ovs-vsctl -t ${TIMEOUT} -- --may-exist add-port "$OVS_BRIDGE" "$DEVICE" $OVS_OPTIONS -- set Interface "$DEVICE" type=$OVS_TUNNEL_TYPE $OVS_TUNNEL_OPTIONS ${OVS_EXTRA+-- $OVS_EXTRA}
145                 ${OTHERSCRIPT} ${CONFIG} ${2}
146                 ;;
147         OVSPatchPort)
148                 ifup_ovs_bridge
149                 ovs-vsctl -t ${TIMEOUT} -- --may-exist add-port "$OVS_BRIDGE" "$DEVICE" $OVS_OPTIONS -- set Interface "$DEVICE" type=patch options:peer="${OVS_PATCH_PEER}" ${OVS_EXTRA+-- $OVS_EXTRA}
150                 ;;
151         *)
152                 echo $"Invalid OVS interface type $TYPE"
153                 exit 1
154                 ;;
155 esac