free(match);
}
+static void
+build_static_route_flow(struct hmap *lflows, struct ovn_datapath *od,
+ struct hmap *ports,
+ const struct nbrec_logical_router_static_route *route)
+{
+ ovs_be32 prefix, next_hop, mask;
+
+ /* Verify that next hop is an IP address with 32 bits mask. */
+ char *error = ip_parse_masked(route->nexthop, &next_hop, &mask);
+ if (error || mask != OVS_BE32_MAX) {
+ static struct vlog_rate_limit rl = VLOG_RATE_LIMIT_INIT(5, 1);
+ VLOG_WARN_RL(&rl, "bad next hop ip address %s", route->nexthop);
+ free(error);
+ return;
+ }
+
+ /* Verify that ip prefix is a valid CIDR address. */
+ error = ip_parse_masked(route->ip_prefix, &prefix, &mask);
+ if (error || !ip_is_cidr(mask)) {
+ static struct vlog_rate_limit rl = VLOG_RATE_LIMIT_INIT(5, 1);
+ VLOG_WARN_RL(&rl, "bad 'network' in static routes %s",
+ route->ip_prefix);
+ free(error);
+ return;
+ }
+
+ /* Find the outgoing port. */
+ struct ovn_port *out_port = NULL;
+ if (route->output_port) {
+ out_port = ovn_port_find(ports, route->output_port);
+ if (!out_port) {
+ static struct vlog_rate_limit rl = VLOG_RATE_LIMIT_INIT(5, 1);
+ VLOG_WARN_RL(&rl, "Bad out port %s for static route %s",
+ route->output_port, route->ip_prefix);
+ return;
+ }
+ } else {
+ /* output_port is not specified, find the
+ * router port matching the next hop. */
+ int i;
+ for (i = 0; i < od->nbr->n_ports; i++) {
+ struct nbrec_logical_router_port *lrp = od->nbr->ports[i];
+ out_port = ovn_port_find(ports, lrp->name);
+ if (!out_port) {
+ /* This should not happen. */
+ continue;
+ }
+
+ if (out_port->network
+ && !((out_port->network ^ next_hop) & out_port->mask)) {
+ /* There should be only 1 interface that matches the next hop.
+ * Otherwise, it's a configuration error, because subnets of
+ * router's interfaces should NOT overlap. */
+ break;
+ }
+ }
+ if (i == od->nbr->n_ports) {
+ /* There is no matched out port. */
+ static struct vlog_rate_limit rl = VLOG_RATE_LIMIT_INIT(5, 1);
+ VLOG_WARN_RL(&rl, "No path for static route %s; next hop %s",
+ route->ip_prefix, route->nexthop);
+ return;
+ }
+ }
+
+ add_route(lflows, out_port, prefix, mask, next_hop);
+}
+
static void
build_lrouter_flows(struct hmap *datapaths, struct hmap *ports,
struct hmap *lflows)
continue;
}
+ /* Convert the static routes to flows. */
+ for (int i = 0; i < od->nbr->n_static_routes; i++) {
+ const struct nbrec_logical_router_static_route *route;
+
+ route = od->nbr->static_routes[i];
+ build_static_route_flow(lflows, od, ports, route);
+ }
+
if (od->gateway && od->gateway_port) {
add_route(lflows, od->gateway_port, 0, 0, od->gateway);
}
AT_CLEANUP
+AT_SETUP([ovn -- 2 HVs, 3 LS, 1 lport/LS, 2 peer LRs, static routes])
+AT_KEYWORDS([ovnstaticroutespeer])
+AT_SKIP_IF([test $HAVE_PYTHON = no])
+ovn_start
+
+# Logical network:
+# Two LRs - R1 and R2 that are connected to each other as peers in 20.0.0.0/24
+# network. R1 has switchess foo (192.168.1.0/24)
+# connected to it.
+# R2 has alice (172.16.1.0/24) and bob (172.16.2.0/24) connected to it.
+
+ovn-nbctl create Logical_Router name=R1
+ovn-nbctl create Logical_Router name=R2
+
+ovn-nbctl lswitch-add foo
+ovn-nbctl lswitch-add alice
+ovn-nbctl lswitch-add bob
+
+# Connect foo to R1
+ovn-nbctl -- --id=@lrp create Logical_Router_port name=foo \
+network=192.168.1.1/24 mac=\"00:00:00:01:02:03\" -- add Logical_Router R1 \
+ports @lrp -- lport-add foo rp-foo
+
+ovn-nbctl set Logical_port rp-foo type=router options:router-port=foo \
+addresses=\"00:00:00:01:02:03\"
+
+# Connect alice to R2
+ovn-nbctl -- --id=@lrp create Logical_Router_port name=alice \
+network=172.16.1.1/24 mac=\"00:00:00:01:02:04\" -- add Logical_Router R2 \
+ports @lrp -- lport-add alice rp-alice
+
+ovn-nbctl set Logical_port rp-alice type=router options:router-port=alice \
+addresses=\"00:00:00:01:02:04\"
+
+# Connect bob to R2
+ovn-nbctl -- --id=@lrp create Logical_Router_port name=bob \
+network=172.16.2.1/24 mac=\"00:00:00:01:02:05\" -- add Logical_Router R2 \
+ports @lrp -- lport-add bob rp-bob
+
+ovn-nbctl set Logical_port rp-bob type=router options:router-port=bob \
+addresses=\"00:00:00:01:02:05\"
+
+# Connect R1 to R2
+lrp1_uuid=`ovn-nbctl -- --id=@lrp create Logical_Router_port name=R1_R2 \
+network="20.0.0.1/24" mac=\"00:00:00:02:03:04\" \
+-- add Logical_Router R1 ports @lrp`
+
+lrp2_uuid=`ovn-nbctl -- --id=@lrp create Logical_Router_port name=R2_R1 \
+network="20.0.0.2/24" mac=\"00:00:00:02:03:05\" \
+-- add Logical_Router R2 ports @lrp`
+
+ovn-nbctl set logical_router_port $lrp1_uuid peer="R2_R1"
+ovn-nbctl set logical_router_port $lrp2_uuid peer="R1_R2"
+
+#install static routes
+ovn-nbctl -- --id=@lrt create Logical_Router_Static_Route \
+ip_prefix=172.16.1.0/24 nexthop=20.0.0.2 -- add Logical_Router \
+R1 static_routes @lrt
+
+ovn-nbctl -- --id=@lrt create Logical_Router_Static_Route \
+ip_prefix=172.16.2.0/24 nexthop=20.0.0.2 output_port=R1_R2 -- add Logical_Router \
+R1 static_routes @lrt
+
+ovn-nbctl -- --id=@lrt create Logical_Router_Static_Route \
+ip_prefix=192.168.1.0/24 nexthop=20.0.0.1 -- add Logical_Router \
+R2 static_routes @lrt
+
+# Create logical port foo1 in foo
+ovn-nbctl lport-add foo foo1 \
+-- lport-set-addresses foo1 "f0:00:00:01:02:03 192.168.1.2"
+
+# Create logical port alice1 in alice
+ovn-nbctl lport-add alice alice1 \
+-- lport-set-addresses alice1 "f0:00:00:01:02:04 172.16.1.2"
+
+# Create logical port bob1 in bob
+ovn-nbctl lport-add bob bob1 \
+-- lport-set-addresses bob1 "f0:00:00:01:02:05 172.16.2.2"
+
+# Create two hypervisor and create OVS ports corresponding to logical ports.
+net_add n1
+
+sim_add hv1
+as hv1
+ovs-vsctl add-br br-phys
+ovn_attach n1 br-phys 192.168.0.1
+ovs-vsctl -- add-port br-int hv1-vif1 -- \
+ set interface hv1-vif1 external-ids:iface-id=foo1 \
+ options:tx_pcap=hv1/vif1-tx.pcap \
+ options:rxq_pcap=hv1/vif1-rx.pcap \
+ ofport-request=1
+
+ovs-vsctl -- add-port br-int hv1-vif2 -- \
+ set interface hv1-vif2 external-ids:iface-id=alice1 \
+ options:tx_pcap=hv1/vif2-tx.pcap \
+ options:rxq_pcap=hv1/vif2-rx.pcap \
+ ofport-request=2
+
+sim_add hv2
+as hv2
+ovs-vsctl add-br br-phys
+ovn_attach n1 br-phys 192.168.0.2
+ovs-vsctl -- add-port br-int hv2-vif1 -- \
+ set interface hv2-vif1 external-ids:iface-id=bob1 \
+ options:tx_pcap=hv2/vif1-tx.pcap \
+ options:rxq_pcap=hv2/vif1-rx.pcap \
+ ofport-request=1
+
+
+# Pre-populate the hypervisors' ARP tables so that we don't lose any
+# packets for ARP resolution (native tunneling doesn't queue packets
+# for ARP resolution).
+ovn_populate_arp
+
+# Allow some time for ovn-northd and ovn-controller to catch up.
+# XXX This should be more systematic.
+sleep 1
+
+ip_to_hex() {
+ printf "%02x%02x%02x%02x" "$@"
+}
+trim_zeros() {
+ sed 's/\(00\)\{1,\}$//'
+}
+
+# Send ip packets between foo1 and alice1
+src_mac="f00000010203"
+dst_mac="000000010203"
+src_ip=`ip_to_hex 192 168 1 2`
+dst_ip=`ip_to_hex 172 16 1 2`
+packet=${dst_mac}${src_mac}08004500001c0000000040110000${src_ip}${dst_ip}0035111100080000
+as hv1 ovs-appctl netdev-dummy/receive hv1-vif1 $packet
+
+# Send ip packets between foo1 and bob1
+src_mac="f00000010203"
+dst_mac="000000010203"
+src_ip=`ip_to_hex 192 168 1 2`
+dst_ip=`ip_to_hex 172 16 2 2`
+packet=${dst_mac}${src_mac}08004500001c0000000040110000${src_ip}${dst_ip}0035111100080000
+as hv1 ovs-appctl netdev-dummy/receive hv1-vif1 $packet
+
+echo "---------NB dump-----"
+ovn-nbctl show
+echo "---------------------"
+ovn-nbctl list logical_router
+echo "---------------------"
+ovn-nbctl list logical_router_port
+echo "---------------------"
+
+echo "---------SB dump-----"
+ovn-sbctl list datapath_binding
+echo "---------------------"
+ovn-sbctl list port_binding
+echo "---------------------"
+
+echo "------ hv1 dump ----------"
+as hv1 ovs-ofctl dump-flows br-int
+echo "------ hv2 dump ----------"
+as hv2 ovs-ofctl dump-flows br-int
+
+# Packet to Expect at bob1
+src_mac="000000010205"
+dst_mac="f00000010205"
+src_ip=`ip_to_hex 192 168 1 2`
+dst_ip=`ip_to_hex 172 16 2 2`
+expected=${dst_mac}${src_mac}08004500001c000000003e110200${src_ip}${dst_ip}0035111100080000
+
+$PYTHON "$top_srcdir/utilities/ovs-pcap.in" hv2/vif1-tx.pcap | trim_zeros > received.packets
+echo $expected | trim_zeros > expout
+AT_CHECK([cat received.packets], [0], [expout])
+
+# Packet to Expect at alice1
+src_mac="000000010204"
+dst_mac="f00000010204"
+src_ip=`ip_to_hex 192 168 1 2`
+dst_ip=`ip_to_hex 172 16 1 2`
+expected=${dst_mac}${src_mac}08004500001c000000003e110200${src_ip}${dst_ip}0035111100080000
+
+$PYTHON "$top_srcdir/utilities/ovs-pcap.in" hv1/vif2-tx.pcap | trim_zeros > received1.packets
+echo $expected | trim_zeros > expout
+AT_CHECK([cat received1.packets], [0], [expout])
+
+for sim in hv1 hv2; do
+ as $sim
+ OVS_APP_EXIT_AND_WAIT([ovn-controller])
+ OVS_APP_EXIT_AND_WAIT([ovs-vswitchd])
+ OVS_APP_EXIT_AND_WAIT([ovsdb-server])
+done
+
+as ovn-sb
+OVS_APP_EXIT_AND_WAIT([ovsdb-server])
+
+as ovn-nb
+OVS_APP_EXIT_AND_WAIT([ovsdb-server])
+
+as northd
+OVS_APP_EXIT_AND_WAIT([ovn-northd])
+
+as main
+OVS_APP_EXIT_AND_WAIT([ovs-vswitchd])
+OVS_APP_EXIT_AND_WAIT([ovsdb-server])
+
+AT_CLEANUP