ifconfig "${slave}" up
done
;;
+ OVSPatchPort)
+ ovs_vsctl -- --may-exist add-port "${IF_OVS_BRIDGE}"\
+ "${IFACE}" ${IF_OVS_OPTIONS} -- set Interface "${IFACE}" \
+ type=patch options:peer="${IF_OVS_PATCH_PEER}" \
+ ${OVS_EXTRA+-- $OVS_EXTRA}
+ ;;
OVSTunnel)
ovs_vsctl -- --may-exist add-port "${IF_OVS_BRIDGE}"\
"${IFACE}" ${IF_OVS_OPTIONS} -- set Interface "${IFACE}" \
ovs_vsctl -- --if-exists del-br "${IFACE}"
;;
- OVSPort|OVSIntPort|OVSBond|OVSTunnel)
+ OVSPort|OVSIntPort|OVSBond|OVSPatchPort|OVSTunnel)
ovs_vsctl -- --if-exists del-port "${IF_OVS_BRIDGE}" "${IFACE}"
;;
*)
The following OVS specific "command" options are supported:
- - ovs_type: This can either be OVSBridge, OVSPort, OVSIntPort, OVSBond or
- OVSTunnel depending on whether you configure a bridge, port, an internal
- port, a bond or a tunnel. This is a required option.
+ - ovs_type: This can either be OVSBridge, OVSPort, OVSIntPort, OVSBond,
+ OVSPatchPort or OVSTunnel depending on whether you configure a bridge,
+ port, an internal port, a bond, a patch port or a tunnel. This is a
+ required option.
- ovs_ports: This option specifies all the ports that belong to a bridge.
- ovs_bonds: This option specifies the list of physical interfaces to be
bonded together.
+ - ovs_patch_peer: For "OVSPatchPort" interfaces, this field specifies
+ the patch's peer on the other bridge.
+
- ovs_tunnel_type: For "OVSTunnel" interfaces, the type of the tunnel.
For example, "gre", "vxlan", etc.
ovs_bonds eth2 eth3
ovs_options bond_mode=balance-tcp lacp=active
-ex 6: Tunnel.
+ex 6: Patch ports.
+
+allow-ovs br0
+iface br0 inet manual
+ ovs_type OVSBridge
+ ovs_ports patch0
+
+allow-br0 patch0
+iface patch0 inet manual
+ ovs_bridge br0
+ ovs_type OVSPatchPort
+ ovs_patch_peer patch1
+
+allow-ovs br1
+iface br1 inet manual
+ ovs_type OVSBridge
+ ovs_ports patch1
+
+allow-br1 patch1
+iface patch1 inet manual
+ ovs_bridge br1
+ ovs_type OVSPatchPort
+ ovs_patch_peer patch0
+
+ex 7: Tunnel.
allow-ovs br1
iface br1 inet static
ovs_tunnel_type gre
ovs_tunnel_options options:remote_ip=182.168.1.2 options:key=1
-ex 7: Create and destroy bridges.
+ex 8: Create and destroy bridges.
ifup --allow=ovs $list_of_bridges
ifdown --allow=ovs $list_of_bridges