Remove --enable-of14 option because the implementation is now safe.

Signed-off-by: Ben Pfaff <blp@nicira.com>

diff --git a/FAQ b/FAQ
index d3632f9..5434090 100644 (file)
--- a/FAQ
+++ b/FAQ
@@ -1155,21 +1155,26 @@ A: The following table lists the versions of OpenFlow supported by
        2.0                yes    [*]    [*]    [*]    ---
        2.1                yes    [*]    [*]    [*]    ---
        2.2                yes    [*]    [*]    [*]    [%]
-       2.3                yes    yes    yes    yes    [%]
+       2.3                yes    yes    yes    yes    [*]
 
        [*] Supported, with one or more missing features.
-       [%] Support is unsafe: ovs-vswitchd will abort when certain
-           unimplemented features are tested.
+       [%] Experimental, unsafe implementation.
 
    Open vSwitch 2.3 enables OpenFlow 1.0, 1.1, 1.2, and 1.3 by default
    in ovs-vswitchd.  In Open vSwitch 1.10 through 2.2, OpenFlow 1.1,
-   1.2, and 1.3 must be enabled manually in ovs-vswitchd.  Either way,
-   the user may override the default:
+   1.2, and 1.3 must be enabled manually in ovs-vswitchd.  OpenFlow
+   1.4 is also supported, with missing features, in Open vSwitch 2.3
+   and later, but not enabled by default.  In any case, the user may
+   override the default:
 
        - To enable OpenFlow 1.0, 1.1, 1.2, and 1.3 on bridge br0:
 
          ovs-vsctl set bridge br0 protocols=OpenFlow10,OpenFlow11,OpenFlow12,OpenFlow13
 
+       - To enable OpenFlow 1.0, 1.1, 1.2, 1.3, and 1.4 on bridge br0:
+
+         ovs-vsctl set bridge br0 protocols=OpenFlow10,OpenFlow11,OpenFlow12,OpenFlow13,OpenFlow14
+
        - To enable only OpenFlow 1.0 on bridge br0:
 
          ovs-vsctl set bridge br0 protocols=OpenFlow10
@@ -1180,12 +1185,8 @@ A: The following table lists the versions of OpenFlow supported by
 
        ovs-ofctl -O OpenFlow13 dump-flows br0
 
-   OpenFlow 1.4 is a special case, because it is not implemented
-   safely: ovs-vswitchd will abort when certain unimplemented features
-   are tested.  Thus, for now it is suitable only for experimental
-   use.  ovs-vswitchd will only allow OpenFlow 1.4 to be enabled
-   (which must be done in the same way described above) when it is
-   invoked with a special --enable-of14 command line option.
+   (Open vSwitch 2.2 had an experimental implementation of OpenFlow
+   1.4 that could cause crashes.  We don't recommend enabling it.)
 
    OPENFLOW-1.1+ in the Open vSwitch source tree tracks support for
    OpenFlow 1.1 and later features.  When support for OpenFlow 1.4 is

diff --git a/lib/ofp-util.c b/lib/ofp-util.c
index b039d31..1549edd 100644 (file)
--- a/lib/ofp-util.c
+++ b/lib/ofp-util.c
@@ -699,16 +699,12 @@ struct proto_abbrev {
 };
 
 /* Most users really don't care about some of the differences between
- * protocols.  These abbreviations help with that.
- *
- * Until it is safe to use the OpenFlow 1.4 protocol (which currently can
- * cause aborts due to unimplemented features), we omit OpenFlow 1.4 from all
- * abbrevations. */
+ * protocols.  These abbreviations help with that. */
 static const struct proto_abbrev proto_abbrevs[] = {
-    { OFPUTIL_P_ANY          & ~OFPUTIL_P_OF14_OXM, "any" },
-    { OFPUTIL_P_OF10_STD_ANY & ~OFPUTIL_P_OF14_OXM, "OpenFlow10" },
-    { OFPUTIL_P_OF10_NXM_ANY & ~OFPUTIL_P_OF14_OXM, "NXM" },
-    { OFPUTIL_P_ANY_OXM      & ~OFPUTIL_P_OF14_OXM, "OXM" },
+    { OFPUTIL_P_ANY,          "any" },
+    { OFPUTIL_P_OF10_STD_ANY, "OpenFlow10" },
+    { OFPUTIL_P_OF10_NXM_ANY, "NXM" },
+    { OFPUTIL_P_ANY_OXM,      "OXM" },
 };
 #define N_PROTO_ABBREVS ARRAY_SIZE(proto_abbrevs)
 

diff --git a/tests/learn.at b/tests/learn.at
index 7245295..3c304d1 100644 (file)
--- a/tests/learn.at
+++ b/tests/learn.at
@@ -7,7 +7,7 @@ actions=learn(NXM_OF_VLAN_TCI[0..11], NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[], output:
 actions=learn(table=1,idle_timeout=10, hard_timeout=20, fin_idle_timeout=5, fin_hard_timeout=10, priority=10, cookie=0xfedcba9876543210, in_port=99,NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[],load:NXM_OF_IN_PORT[]->NXM_NX_REG1[16..31])
 ]])
 AT_CHECK([ovs-ofctl parse-flows flows.txt], [0],
-[[usable protocols: any,OXM-OpenFlow14
+[[usable protocols: any
 chosen protocol: OpenFlow10-table_id
 OFPT_FLOW_MOD (xid=0x1): ADD actions=learn(table=1)
 OFPT_FLOW_MOD (xid=0x2): ADD actions=learn(table=1,NXM_OF_VLAN_TCI[0..11],NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[],output:NXM_OF_IN_PORT[],load:0xa->NXM_NX_REG0[5..10])
@@ -30,7 +30,7 @@ actions=learn(output:OXM_OF_IN_PORT[])
 actions=learn(table=1, in_port=1, load:OXM_OF_IN_PORT[]->NXM_NX_REG1[], load:0xfffffffe->OXM_OF_IN_PORT[])
 ]])
 AT_CHECK([ovs-ofctl -O OpenFlow12 parse-flows flows.txt], [0],
-[[usable protocols: any,OXM-OpenFlow14
+[[usable protocols: any
 chosen protocol: OXM-OpenFlow12
 OFPT_FLOW_MOD (OF1.2) (xid=0x1): ADD actions=learn(table=1,output:OXM_OF_IN_PORT[])
 OFPT_FLOW_MOD (OF1.2) (xid=0x2): ADD actions=learn(table=1,in_port=1,load:OXM_OF_IN_PORT[]->NXM_NX_REG1[],load:0xfffffffe->OXM_OF_IN_PORT[])
@@ -46,7 +46,7 @@ table=0 actions=learn(table=1,hard_timeout=10, NXM_OF_VLAN_TCI[0..11],output:NXM
 table=1 priority=0 actions=flood
 ]])
 AT_CHECK([ovs-ofctl parse-flows flows.txt], [0],
-[[usable protocols: OXM,OpenFlow10+table_id,NXM+table_id,OpenFlow11,OXM-OpenFlow14
+[[usable protocols: OXM,OpenFlow10+table_id,NXM+table_id,OpenFlow11
 chosen protocol: OpenFlow10+table_id
 OFPT_FLOW_MOD (xid=0x1): ADD table:255 actions=learn(table=1,in_port=99,NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[],load:NXM_OF_IN_PORT[]->NXM_NX_REG1[16..31])
 OFPT_FLOW_MOD (xid=0x2): ADD table:255 actions=learn(table=1,NXM_OF_VLAN_TCI[0..11],NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[],output:NXM_OF_IN_PORT[])
@@ -62,7 +62,7 @@ ip,actions=learn(load:NXM_OF_IP_DST[]->NXM_NX_REG1[])
 ip,actions=learn(eth_type=0x800,OXM_OF_IPV4_DST[])
 ]])
 AT_CHECK([ovs-ofctl parse-flows flows.txt], [0],
-[[usable protocols: any,OXM-OpenFlow14
+[[usable protocols: any
 chosen protocol: OpenFlow10-table_id
 OFPT_FLOW_MOD (xid=0x1): ADD actions=learn(table=1,eth_type=0x800,load:0x5->NXM_OF_IP_DST[])
 OFPT_FLOW_MOD (xid=0x2): ADD ip actions=learn(table=1,load:NXM_OF_IP_DST[]->NXM_NX_REG1[])

diff --git a/tests/ofproto-macros.at b/tests/ofproto-macros.at
index 8a058ae..ea44aa5 100644 (file)
--- a/tests/ofproto-macros.at
+++ b/tests/ofproto-macros.at
@@ -73,7 +73,7 @@ m4_define([OVS_VSWITCHD_START],
    AT_CHECK([ovs-vsctl --no-wait init])
 
    dnl Start ovs-vswitchd.
-   AT_CHECK([ovs-vswitchd --detach --no-chdir --pidfile --enable-dummy$3 --disable-system --log-file -vvconn -vofproto_dpif --enable-of14], [0], [], [stderr])
+   AT_CHECK([ovs-vswitchd --detach --no-chdir --pidfile --enable-dummy$3 --disable-system --log-file -vvconn -vofproto_dpif], [0], [], [stderr])
    AT_CAPTURE_FILE([ovs-vswitchd.log])
    AT_CHECK([[sed < stderr '
 /vlog|INFO|opened log file/d

diff --git a/tests/ovs-ofctl.at b/tests/ovs-ofctl.at
index f3bad2b..bda8666 100644 (file)
--- a/tests/ovs-ofctl.at
+++ b/tests/ovs-ofctl.at
@@ -3,110 +3,110 @@ AT_BANNER([ovs-ofctl])
 AT_SETUP([ovs-ofctl parse-flows choice of protocol])
 # This doesn't cover some potential vlan_tci test cases.
 for test_case in \
-    'tun_id=0                                    NXM,OXM,OXM-OpenFlow14' \
-    'tun_id=0/0x1                                NXM,OXM,OXM-OpenFlow14' \
-    'tun_src=1.2.3.4                             NXM,OXM,OXM-OpenFlow14' \
-    'tun_src=1.2.3.4/0.0.0.1                     NXM,OXM,OXM-OpenFlow14' \
-    'tun_dst=1.2.3.4                             NXM,OXM,OXM-OpenFlow14' \
-    'tun_dst=1.2.3.4/0.0.0.1                     NXM,OXM,OXM-OpenFlow14' \
+    'tun_id=0                                    NXM,OXM' \
+    'tun_id=0/0x1                                NXM,OXM' \
+    'tun_src=1.2.3.4                             NXM,OXM' \
+    'tun_src=1.2.3.4/0.0.0.1                     NXM,OXM' \
+    'tun_dst=1.2.3.4                             NXM,OXM' \
+    'tun_dst=1.2.3.4/0.0.0.1                     NXM,OXM' \
     'tun_flags=0                                 none' \
     'tun_flags=1/1                               none' \
     'tun_tos=0                                   none' \
     'tun_ttl=0                                   none' \
-    'metadata=0                                  NXM,OXM,OpenFlow11,OXM-OpenFlow14' \
-    'metadata=1/1                                NXM,OXM,OpenFlow11,OXM-OpenFlow14' \
-    'in_port=1                                   any,OXM-OpenFlow14' \
+    'metadata=0                                  NXM,OXM,OpenFlow11' \
+    'metadata=1/1                                NXM,OXM,OpenFlow11' \
+    'in_port=1                                   any' \
     'skb_priority=0                              none' \
-    'pkt_mark=1                                  NXM,OXM,OXM-OpenFlow14' \
-    'pkt_mark=1/1                                NXM,OXM,OXM-OpenFlow14' \
-    'reg0=0                                      NXM,OXM,OXM-OpenFlow14' \
-    'reg0=0/1                                    NXM,OXM,OXM-OpenFlow14' \
-    'reg1=1                                      NXM,OXM,OXM-OpenFlow14' \
-    'reg1=1/1                                    NXM,OXM,OXM-OpenFlow14' \
-    'reg2=2                                      NXM,OXM,OXM-OpenFlow14' \
-    'reg2=2/1                                    NXM,OXM,OXM-OpenFlow14' \
-    'reg3=3                                      NXM,OXM,OXM-OpenFlow14' \
-    'reg3=3/1                                    NXM,OXM,OXM-OpenFlow14' \
-    'reg4=4                                      NXM,OXM,OXM-OpenFlow14' \
-    'reg4=4/1                                    NXM,OXM,OXM-OpenFlow14' \
-    'reg5=5                                      NXM,OXM,OXM-OpenFlow14' \
-    'reg5=5/1                                    NXM,OXM,OXM-OpenFlow14' \
-    'reg6=6                                      NXM,OXM,OXM-OpenFlow14' \
-    'reg6=6/1                                    NXM,OXM,OXM-OpenFlow14' \
-    'reg7=7                                      NXM,OXM,OXM-OpenFlow14' \
-    'reg7=7/1                                    NXM,OXM,OXM-OpenFlow14' \
-    'dl_src=00:11:22:33:44:55                    any,OXM-OpenFlow14' \
-    'dl_src=00:11:22:33:44:55/00:ff:ff:ff:ff:ff  NXM,OXM,OpenFlow11,OXM-OpenFlow14' \
-    'dl_dst=00:11:22:33:44:55                    any,OXM-OpenFlow14' \
-    'dl_dst=00:11:22:33:44:55/00:ff:ff:ff:ff:ff  NXM,OXM,OpenFlow11,OXM-OpenFlow14' \
-    'dl_type=0x1234                              any,OXM-OpenFlow14' \
-    'dl_type=0x0800                              any,OXM-OpenFlow14' \
-    'dl_type=0x0806                              any,OXM-OpenFlow14' \
-    'dl_type=0x86dd                              any,OXM-OpenFlow14' \
-    'vlan_tci=0                                  any,OXM-OpenFlow14' \
-    'vlan_tci=0x1009                             any,OXM-OpenFlow14' \
-    'vlan_tci=0x1009/0x1                         NXM,OXM,OXM-OpenFlow14' \
-    'dl_vlan=9                                   any,OXM-OpenFlow14' \
-    'vlan_vid=11                                 any,OXM-OpenFlow14' \
-    'vlan_vid=11/0x1                             NXM,OXM,OXM-OpenFlow14' \
-    'dl_vlan_pcp=6                               any,OXM-OpenFlow14' \
-    'vlan_pcp=5                                  any,OXM-OpenFlow14' \
-    'mpls,mpls_label=5                           NXM,OXM,OpenFlow11,OXM-OpenFlow14' \
-    'mpls,mpls_tc=1                              NXM,OXM,OpenFlow11,OXM-OpenFlow14' \
-    'mpls,mpls_bos=0                             NXM,OXM,OXM-OpenFlow14' \
-    'ip,ip_src=1.2.3.4                           any,OXM-OpenFlow14' \
-    'ip,ip_src=192.168.0.0/24                    any,OXM-OpenFlow14' \
-    'ip,ip_src=192.0.168.0/255.0.255.0           NXM,OXM,OpenFlow11,OXM-OpenFlow14' \
-    'ip,ip_dst=1.2.3.4                           any,OXM-OpenFlow14' \
-    'ip,ip_dst=192.168.0.0/24                    any,OXM-OpenFlow14' \
-    'ip,ip_dst=192.0.168.0/255.0.255.0           NXM,OXM,OpenFlow11,OXM-OpenFlow14' \
-    'ipv6,ipv6_src=::1                           NXM,OXM,OXM-OpenFlow14' \
-    'ipv6,ipv6_src=::1/::1                       NXM,OXM,OXM-OpenFlow14' \
-    'ipv6,ipv6_dst=::1                           NXM,OXM,OXM-OpenFlow14' \
-    'ipv6,ipv6_dst=::1/::1                       NXM,OXM,OXM-OpenFlow14' \
-    'ipv6,ipv6_label=5                           NXM,OXM,OXM-OpenFlow14' \
-    'ipv6,ipv6_label=5/1                         NXM,OXM,OXM-OpenFlow14' \
-    'ip,nw_proto=1                               any,OXM-OpenFlow14' \
-    'ipv6,nw_proto=1                             NXM,OXM,OXM-OpenFlow14' \
-    'ip,nw_tos=0xf0                              any,OXM-OpenFlow14' \
-    'ipv6,nw_tos=0xf0                            NXM,OXM,OXM-OpenFlow14' \
-    'ip,ip_dscp=0x3c                             any,OXM-OpenFlow14' \
-    'ipv6,ip_dscp=0x3c                           NXM,OXM,OXM-OpenFlow14' \
-    'ip,nw_ecn=1                                 NXM,OXM,OXM-OpenFlow14' \
-    'ipv6,nw_ecn=1                               NXM,OXM,OXM-OpenFlow14' \
-    'ip,nw_ttl=5                                 NXM,OXM,OXM-OpenFlow14' \
-    'ipv6,nw_ttl=5                               NXM,OXM,OXM-OpenFlow14' \
-    'ip,ip_frag=no                               NXM,OXM,OXM-OpenFlow14' \
-    'ipv6,ip_frag=no                             NXM,OXM,OXM-OpenFlow14' \
-    'arp,arp_op=0                                any,OXM-OpenFlow14' \
-    'arp,arp_spa=1.2.3.4                         any,OXM-OpenFlow14' \
-    'arp,arp_spa=1.2.3.4/0.0.0.1                 NXM,OXM,OpenFlow11,OXM-OpenFlow14' \
-    'arp,arp_tpa=1.2.3.4                         any,OXM-OpenFlow14' \
-    'arp,arp_tpa=1.2.3.4/0.0.0.1                 NXM,OXM,OpenFlow11,OXM-OpenFlow14' \
-    'arp,arp_sha=00:11:22:33:44:55               NXM,OXM,OXM-OpenFlow14' \
-    'arp,arp_sha=00:11:22:33:44:55/00:ff:ff:ff:ff:ff NXM,OXM,OXM-OpenFlow14' \
-    'arp,arp_tha=00:11:22:33:44:55               NXM,OXM,OXM-OpenFlow14' \
-    'arp,arp_tha=00:11:22:33:44:55/00:ff:ff:ff:ff:ff NXM,OXM,OXM-OpenFlow14' \
-    'tcp,tcp_src=80                              any,OXM-OpenFlow14' \
-    'tcp,tcp_src=0x1000/0x1000                   NXM,OXM,OXM-OpenFlow14' \
-    'tcp6,tcp_src=80                             NXM,OXM,OXM-OpenFlow14' \
-    'tcp6,tcp_src=0x1000/0x1000                  NXM,OXM,OXM-OpenFlow14' \
-    'tcp,tcp_dst=80                              any,OXM-OpenFlow14' \
-    'tcp,tcp_dst=0x1000/0x1000                   NXM,OXM,OXM-OpenFlow14' \
-    'tcp6,tcp_dst=80                             NXM,OXM,OXM-OpenFlow14' \
-    'tcp6,tcp_dst=0x1000/0x1000                  NXM,OXM,OXM-OpenFlow14' \
-    'udp,udp_src=80                              any,OXM-OpenFlow14' \
-    'udp,udp_src=0x1000/0x1000                   NXM,OXM,OXM-OpenFlow14' \
-    'udp6,udp_src=80                             NXM,OXM,OXM-OpenFlow14' \
-    'udp6,udp_src=0x1000/0x1000                  NXM,OXM,OXM-OpenFlow14' \
-    'udp,udp_dst=80                              any,OXM-OpenFlow14' \
-    'udp,udp_dst=0x1000/0x1000                   NXM,OXM,OXM-OpenFlow14' \
-    'udp6,udp_dst=80                             NXM,OXM,OXM-OpenFlow14' \
-    'udp6,udp_dst=0x1000/0x1000                  NXM,OXM,OXM-OpenFlow14' \
-    'icmp,icmp_type=1                            any,OXM-OpenFlow14' \
-    'icmp,icmp_code=2                            any,OXM-OpenFlow14' \
-    'icmp6,icmpv6_type=1                         NXM,OXM,OXM-OpenFlow14' \
-    'icmp6,icmpv6_code=2                         NXM,OXM,OXM-OpenFlow14'
+    'pkt_mark=1                                  NXM,OXM' \
+    'pkt_mark=1/1                                NXM,OXM' \
+    'reg0=0                                      NXM,OXM' \
+    'reg0=0/1                                    NXM,OXM' \
+    'reg1=1                                      NXM,OXM' \
+    'reg1=1/1                                    NXM,OXM' \
+    'reg2=2                                      NXM,OXM' \
+    'reg2=2/1                                    NXM,OXM' \
+    'reg3=3                                      NXM,OXM' \
+    'reg3=3/1                                    NXM,OXM' \
+    'reg4=4                                      NXM,OXM' \
+    'reg4=4/1                                    NXM,OXM' \
+    'reg5=5                                      NXM,OXM' \
+    'reg5=5/1                                    NXM,OXM' \
+    'reg6=6                                      NXM,OXM' \
+    'reg6=6/1                                    NXM,OXM' \
+    'reg7=7                                      NXM,OXM' \
+    'reg7=7/1                                    NXM,OXM' \
+    'dl_src=00:11:22:33:44:55                    any' \
+    'dl_src=00:11:22:33:44:55/00:ff:ff:ff:ff:ff  NXM,OXM,OpenFlow11' \
+    'dl_dst=00:11:22:33:44:55                    any' \
+    'dl_dst=00:11:22:33:44:55/00:ff:ff:ff:ff:ff  NXM,OXM,OpenFlow11' \
+    'dl_type=0x1234                              any' \
+    'dl_type=0x0800                              any' \
+    'dl_type=0x0806                              any' \
+    'dl_type=0x86dd                              any' \
+    'vlan_tci=0                                  any' \
+    'vlan_tci=0x1009                             any' \
+    'vlan_tci=0x1009/0x1                         NXM,OXM' \
+    'dl_vlan=9                                   any' \
+    'vlan_vid=11                                 any' \
+    'vlan_vid=11/0x1                             NXM,OXM' \
+    'dl_vlan_pcp=6                               any' \
+    'vlan_pcp=5                                  any' \
+    'mpls,mpls_label=5                           NXM,OXM,OpenFlow11' \
+    'mpls,mpls_tc=1                              NXM,OXM,OpenFlow11' \
+    'mpls,mpls_bos=0                             NXM,OXM' \
+    'ip,ip_src=1.2.3.4                           any' \
+    'ip,ip_src=192.168.0.0/24                    any' \
+    'ip,ip_src=192.0.168.0/255.0.255.0           NXM,OXM,OpenFlow11' \
+    'ip,ip_dst=1.2.3.4                           any' \
+    'ip,ip_dst=192.168.0.0/24                    any' \
+    'ip,ip_dst=192.0.168.0/255.0.255.0           NXM,OXM,OpenFlow11' \
+    'ipv6,ipv6_src=::1                           NXM,OXM' \
+    'ipv6,ipv6_src=::1/::1                       NXM,OXM' \
+    'ipv6,ipv6_dst=::1                           NXM,OXM' \
+    'ipv6,ipv6_dst=::1/::1                       NXM,OXM' \
+    'ipv6,ipv6_label=5                           NXM,OXM' \
+    'ipv6,ipv6_label=5/1                         NXM,OXM' \
+    'ip,nw_proto=1                               any' \
+    'ipv6,nw_proto=1                             NXM,OXM' \
+    'ip,nw_tos=0xf0                              any' \
+    'ipv6,nw_tos=0xf0                            NXM,OXM' \
+    'ip,ip_dscp=0x3c                             any' \
+    'ipv6,ip_dscp=0x3c                           NXM,OXM' \
+    'ip,nw_ecn=1                                 NXM,OXM' \
+    'ipv6,nw_ecn=1                               NXM,OXM' \
+    'ip,nw_ttl=5                                 NXM,OXM' \
+    'ipv6,nw_ttl=5                               NXM,OXM' \
+    'ip,ip_frag=no                               NXM,OXM' \
+    'ipv6,ip_frag=no                             NXM,OXM' \
+    'arp,arp_op=0                                any' \
+    'arp,arp_spa=1.2.3.4                         any' \
+    'arp,arp_spa=1.2.3.4/0.0.0.1                 NXM,OXM,OpenFlow11' \
+    'arp,arp_tpa=1.2.3.4                         any' \
+    'arp,arp_tpa=1.2.3.4/0.0.0.1                 NXM,OXM,OpenFlow11' \
+    'arp,arp_sha=00:11:22:33:44:55               NXM,OXM' \
+    'arp,arp_sha=00:11:22:33:44:55/00:ff:ff:ff:ff:ff NXM,OXM' \
+    'arp,arp_tha=00:11:22:33:44:55               NXM,OXM' \
+    'arp,arp_tha=00:11:22:33:44:55/00:ff:ff:ff:ff:ff NXM,OXM' \
+    'tcp,tcp_src=80                              any' \
+    'tcp,tcp_src=0x1000/0x1000                   NXM,OXM' \
+    'tcp6,tcp_src=80                             NXM,OXM' \
+    'tcp6,tcp_src=0x1000/0x1000                  NXM,OXM' \
+    'tcp,tcp_dst=80                              any' \
+    'tcp,tcp_dst=0x1000/0x1000                   NXM,OXM' \
+    'tcp6,tcp_dst=80                             NXM,OXM' \
+    'tcp6,tcp_dst=0x1000/0x1000                  NXM,OXM' \
+    'udp,udp_src=80                              any' \
+    'udp,udp_src=0x1000/0x1000                   NXM,OXM' \
+    'udp6,udp_src=80                             NXM,OXM' \
+    'udp6,udp_src=0x1000/0x1000                  NXM,OXM' \
+    'udp,udp_dst=80                              any' \
+    'udp,udp_dst=0x1000/0x1000                   NXM,OXM' \
+    'udp6,udp_dst=80                             NXM,OXM' \
+    'udp6,udp_dst=0x1000/0x1000                  NXM,OXM' \
+    'icmp,icmp_type=1                            any' \
+    'icmp,icmp_code=2                            any' \
+    'icmp6,icmpv6_type=1                         NXM,OXM' \
+    'icmp6,icmpv6_code=2                         NXM,OXM'
 do
     set $test_case
     echo
@@ -145,7 +145,7 @@ actions=sample(probability=12345,collector_set_id=23456,obs_domain_id=34567,obs_
 AT_CHECK([ovs-ofctl parse-flows flows.txt
 ], [0], [stdout])
 AT_CHECK([[sed 's/ (xid=0x[0-9a-fA-F]*)//' stdout]], [0],
-[[usable protocols: any,OXM-OpenFlow14
+[[usable protocols: any
 chosen protocol: OpenFlow10-table_id
 OFPT_FLOW_MOD: ADD tcp,tp_src=123 out_port:5 actions=FLOOD
 OFPT_FLOW_MOD: ADD in_port=LOCAL,dl_vlan=9,dl_src=00:0a:e4:25:6b:b0 actions=drop
@@ -182,7 +182,7 @@ actions=sample(probability=12345,collector_set_id=23456,obs_domain_id=34567,obs_
 AT_CHECK([ovs-ofctl --protocols OpenFlow11 parse-flows flows.txt
 ], [0], [stdout])
 AT_CHECK([[sed 's/ (xid=0x[0-9a-fA-F]*)//' stdout]], [0],
-[[usable protocols: any,OXM-OpenFlow14
+[[usable protocols: any
 chosen protocol: OpenFlow11
 OFPT_FLOW_MOD (OF1.1): ADD tcp,tp_src=123 out_port:5 actions=FLOOD
 OFPT_FLOW_MOD (OF1.1): ADD in_port=LOCAL,dl_vlan=9,dl_src=00:0a:e4:25:6b:b0 actions=drop
@@ -223,7 +223,7 @@ actions=sample(probability=12345,collector_set_id=23456,obs_domain_id=34567,obs_
 AT_CHECK([ovs-ofctl --protocols OpenFlow12 parse-flows flows.txt
 ], [0], [stdout])
 AT_CHECK([[sed 's/ (xid=0x[0-9a-fA-F]*)//' stdout]], [0],
-[[usable protocols: NXM,OXM,OXM-OpenFlow14
+[[usable protocols: NXM,OXM
 chosen protocol: OXM-OpenFlow12
 OFPT_FLOW_MOD (OF1.2): ADD tcp,tp_src=123 actions=FLOOD
 OFPT_FLOW_MOD (OF1.2): ADD in_port=LOCAL,dl_vlan=9,dl_src=00:0a:e4:25:6b:b0 actions=set_field:4103->vlan_vid,set_field:2->vlan_pcp
@@ -350,7 +350,7 @@ actions=sample(probability=12345,collector_set_id=23456,obs_domain_id=34567,obs_
 AT_CHECK([ovs-ofctl parse-flows flows.txt
 ], [0], [stdout])
 AT_CHECK([[sed 's/ (xid=0x[0-9a-fA-F]*)//' stdout]], [0],
-[[usable protocols: OXM,NXM+table_id,OXM-OpenFlow14
+[[usable protocols: OXM,NXM+table_id
 chosen protocol: NXM+table_id
 NXT_FLOW_MOD: ADD table:255 tcp,tp_src=123 actions=FLOOD
 NXT_FLOW_MOD: ADD table:255 in_port=LOCAL,dl_vlan=9,dl_src=00:0a:e4:25:6b:b0 actions=drop
@@ -418,7 +418,7 @@ actions=sample(probability=12345,collector_set_id=23456,obs_domain_id=34567,obs_
 ])
 AT_CHECK([ovs-ofctl -F nxm parse-flows flows.txt], [0], [stdout])
 AT_CHECK([[sed 's/ (xid=0x[0-9a-fA-F]*)//' stdout]], [0], [dnl
-usable protocols: NXM,OXM,OXM-OpenFlow14
+usable protocols: NXM,OXM
 chosen protocol: NXM-table_id
 NXT_FLOW_MOD: ADD tcp,tp_src=123 actions=FLOOD
 NXT_FLOW_MOD: ADD in_port=LOCAL,dl_vlan=9,dl_src=00:0a:e4:25:6b:b0 actions=drop
@@ -484,7 +484,7 @@ actions=sample(probability=12345,collector_set_id=23456,obs_domain_id=34567,obs_
 ]])
 AT_CHECK([ovs-ofctl -F nxm -mmm parse-flows flows.txt], [0], [stdout], [stderr])
 AT_CHECK([[sed 's/ (xid=0x[0-9a-fA-F]*)//' stdout]], [0],
-[[usable protocols: NXM,OXM,OXM-OpenFlow14
+[[usable protocols: NXM,OXM
 chosen protocol: NXM-table_id
 NXT_FLOW_MOD: ADD NXM_OF_ETH_TYPE(0800), NXM_OF_IP_PROTO(06), NXM_OF_TCP_SRC(007b) actions=FLOOD
 NXT_FLOW_MOD: ADD NXM_OF_IN_PORT(fffe), NXM_OF_ETH_SRC(000ae4256bb0), NXM_OF_VLAN_TCI_W(1009/1fff) actions=drop
@@ -2233,10 +2233,10 @@ dnl Check that "-F openflow10" rejects a flow_mod with unsupported features,
 dnl such as tunnels and metadata.
 AT_SETUP([ovs-ofctl -F option and NXM features])
 AT_CHECK([ovs-ofctl -F openflow10 add-flow dummy tun_id=123,actions=drop],
-  [1], [], [ovs-ofctl: none of the usable flow formats (NXM,OXM,OXM-OpenFlow14) is among the allowed flow formats (OpenFlow10)
+  [1], [], [ovs-ofctl: none of the usable flow formats (NXM,OXM) is among the allowed flow formats (OpenFlow10)
 ])
 AT_CHECK([ovs-ofctl -F openflow10 add-flow dummy metadata=123,actions=drop],
-  [1], [], [ovs-ofctl: none of the usable flow formats (NXM,OXM,OpenFlow11,OXM-OpenFlow14) is among the allowed flow formats (OpenFlow10)
+  [1], [], [ovs-ofctl: none of the usable flow formats (NXM,OXM,OpenFlow11) is among the allowed flow formats (OpenFlow10)
 ])
 AT_CLEANUP
 
@@ -2271,7 +2271,7 @@ dnl can't be represented in OpenFlow 1.0.
 AT_SETUP([ovs-ofctl dump-flows rejects bad -F option])
 OVS_VSWITCHD_START
 AT_CHECK([ovs-ofctl -F openflow10 dump-flows unix:br0.mgmt reg0=0xabcdef], [1], [],
-  [ovs-ofctl: none of the usable flow formats (NXM,OXM,OXM-OpenFlow14) is among the allowed flow formats (OpenFlow10)
+  [ovs-ofctl: none of the usable flow formats (NXM,OXM) is among the allowed flow formats (OpenFlow10)
 ])
 OVS_VSWITCHD_STOP
 AT_CLEANUP

diff --git a/utilities/ovs-ofctl.8.in b/utilities/ovs-ofctl.8.in
index 9923715..190b45e 100644 (file)
--- a/utilities/ovs-ofctl.8.in
+++ b/utilities/ovs-ofctl.8.in
@@ -1977,13 +1977,9 @@ format.
 .
 .IP "\fBOXM-OpenFlow12\fR"
 .IQ "\fBOXM-OpenFlow13\fR"
+.IQ "\fBOXM-OpenFlow14\fR"
 These are the standard OXM (OpenFlow Extensible Match) flow format in
-OpenFlow 1.2 and 1.3, respectively.
-.IP "\fBOXM-OpenFlow14\fR"
-The standard OXM (OpenFlow Extensible Match) flow format in OpenFlow
-1.4.  OpenFlow 1.4 is not yet well supported; in particular, the
-implementation is unsafe, such that sending an unsupported message in
-OpenFlow 1.4 to \fBovs\-vswitchd\fR can cause it to crash.
+OpenFlow 1.2, 1.3, and 1.4, respectively.
 .RE
 .
 .IP
@@ -1991,15 +1987,13 @@ OpenFlow 1.4 to \fBovs\-vswitchd\fR can cause it to crash.
 collections of flow formats:
 .RS
 .IP "\fBany\fR"
-Any supported flow format except \fBOXM-OpenFlow14\fR, which is not
-yet well supported (see above).
+Any supported flow format.
 .IP "\fBOpenFlow10\fR"
 \fBOpenFlow10\-table_id\fR or \fBOpenFlow10+table_id\fR.
 .IP "\fBNXM\fR"
 \fBNXM\-table_id\fR or \fBNXM+table_id\fR.
 .IP "\fBOXM\fR"
-\fBOXM-OpenFlow12\fR or \fBOXM-OpenFlow13\fR.  \fBOXM-OpenFlow14\fR is
-not included because it is not yet well supported (see above).
+\fBOXM-OpenFlow12\fR, \fBOXM-OpenFlow13\fR, or \fBOXM-OpenFlow14\fR.
 .RE
 .
 .IP

diff --git a/vswitchd/bridge.c b/vswitchd/bridge.c
index 43c109c..1b06ec9 100644 (file)
--- a/vswitchd/bridge.c
+++ b/vswitchd/bridge.c
@@ -185,11 +185,6 @@ static struct ovsdb_idl_txn *status_txn;
 static int stats_timer_interval;
 static long long int stats_timer = LLONG_MIN;
 
-/* Set to true to allow experimental use of OpenFlow 1.4.
- * This is false initially because OpenFlow 1.4 is not yet safe to use: it can
- * abort due to unimplemented features. */
-static bool allow_of14;
-
 /* In some datapaths, creating and destroying OpenFlow ports can be extremely
  * expensive.  This can cause bridge_reconfigure() to take a long time during
  * which no other work can be done.  To deal with this problem, we limit port
@@ -452,14 +447,6 @@ bridge_exit(void)
     ovsdb_idl_destroy(idl);
 }
 
-/* Enables use of OpenFlow 1.4.  This is off by default because OpenFlow 1.4 is
- * not yet safe to use: it can abort due to unimplemented features. */
-void
-bridge_enable_of14(void)
-{
-    allow_of14 = true;
-}
-
 /* Looks at the list of managers in 'ovs_cfg' and extracts their remote IP
  * addresses and ports into '*managersp' and '*n_managersp'.  The caller is
  * responsible for freeing '*managersp' (with free()).
@@ -983,17 +970,11 @@ bridge_configure_datapath_id(struct bridge *br)
 static uint32_t
 bridge_get_allowed_versions(struct bridge *br)
 {
-    uint32_t allowed_versions;
-
     if (!br->cfg->n_protocols)
         return 0;
 
-    allowed_versions = ofputil_versions_from_strings(br->cfg->protocols,
-                                                     br->cfg->n_protocols);
-    if (!allow_of14) {
-        allowed_versions &= ~(1u << OFP14_VERSION);
-    }
-    return allowed_versions;
+    return ofputil_versions_from_strings(br->cfg->protocols,
+                                         br->cfg->n_protocols);
 }
 
 /* Set NetFlow configuration on 'br'. */

diff --git a/vswitchd/bridge.h b/vswitchd/bridge.h
index d1ca988..3783a21 100644 (file)
--- a/vswitchd/bridge.h
+++ b/vswitchd/bridge.h
@@ -21,8 +21,6 @@ struct simap;
 void bridge_init(const char *remote);
 void bridge_exit(void);
 
-void bridge_enable_of14(void);
-
 void bridge_run(void);
 void bridge_wait(void);
 

diff --git a/vswitchd/ovs-vswitchd.8.in b/vswitchd/ovs-vswitchd.8.in
index 817cec2..e9dc483 100644 (file)
--- a/vswitchd/ovs-vswitchd.8.in
+++ b/vswitchd/ovs-vswitchd.8.in
@@ -83,16 +83,6 @@ only allow privileged users, such as the superuser, to use it.
 \fBovs\-vswitchd\fR emits a log message if \fBmlockall()\fR is
 unavailable or unsuccessful.
 .
-.IP "\fB\-\-enable\-of14\fR"
-Specifying this option allows OpenFlow 1.4 to be used if it is enabled
-through the \fBprotocols\fR column in the \fBController\fR.  Without
-this option, \fBovs\-vswitchd\fR will not use OpenFlow 1.4 even if it
-is enabled that way.  This option is present because OpenFlow 1.4
-support is not safe: the daemon will abort when certain unimplemented
-features are tested.  Thus, for now it is suitable only for
-experimental use.  When the support is implemented safely, this option
-will be removed.
-.
 .SS "Daemon Options"
 .ds DD \
 \fBovs\-vswitchd\fR detaches only after it has connected to the \

diff --git a/vswitchd/ovs-vswitchd.c b/vswitchd/ovs-vswitchd.c
index 2f3086d..3c843e1 100644 (file)
--- a/vswitchd/ovs-vswitchd.c
+++ b/vswitchd/ovs-vswitchd.c
@@ -147,7 +147,6 @@ parse_options(int argc, char *argv[], char **unixctl_pathp)
         OPT_BOOTSTRAP_CA_CERT,
         OPT_ENABLE_DUMMY,
         OPT_DISABLE_SYSTEM,
-        OPT_ENABLE_OF14,
         DAEMON_OPTION_ENUMS,
         OPT_DPDK,
     };
@@ -163,7 +162,6 @@ parse_options(int argc, char *argv[], char **unixctl_pathp)
         {"bootstrap-ca-cert", required_argument, NULL, OPT_BOOTSTRAP_CA_CERT},
         {"enable-dummy", optional_argument, NULL, OPT_ENABLE_DUMMY},
         {"disable-system", no_argument, NULL, OPT_DISABLE_SYSTEM},
-        {"enable-of14", no_argument, NULL, OPT_ENABLE_OF14},
         {"dpdk", required_argument, NULL, OPT_DPDK},
         {NULL, 0, NULL, 0},
     };
@@ -213,10 +211,6 @@ parse_options(int argc, char *argv[], char **unixctl_pathp)
             dp_blacklist_provider("system");
             break;
 
-        case OPT_ENABLE_OF14:
-            bridge_enable_of14();
-            break;
-
         case '?':
             exit(EXIT_FAILURE);
 
@@ -258,7 +252,6 @@ usage(void)
     vlog_usage();
     printf("\nOther options:\n"
            "  --unixctl=SOCKET        override default control socket name\n"
-           "  --enable-of14           allow enabling OF1.4 (unsafely!)\n"
            "  -h, --help              display this help message\n"
            "  -V, --version           display version information\n");
     exit(EXIT_SUCCESS);

diff --git a/vswitchd/vswitch.xml b/vswitchd/vswitch.xml
index a351813..a8a3246 100644 (file)
--- a/vswitchd/vswitch.xml
+++ b/vswitchd/vswitch.xml
@@ -588,14 +588,8 @@
        </p>
 
        <p>
-         The current implementation of OpenFlow 1.4 support is not safe:
-         <code>ovs-vswitchd</code> will abort when certain unimplemented
-         features are tested.  Thus, for now it is suitable only for
-         experimental use.  For this reason, OpenFlow 1.4 is supported only
-         if, in addition to specifying <code>OpenFlow14</code> in this field,
-         <code>ovs-vswitchd</code> is invoked with the
-         <code>--enable-of14</code> option.  (When support becomes safe, this
-         option will be removed.)
+         OpenFlow 1.4 is not enabled by default because its implementation is
+         missing features.
        </p>
       </column>
     </group>