7 - Compatibility with autoconf 2.63 (previously >=2.64)
8 - ovs-pki: Changed message digest algorithm from MD5 to SHA-1 because
9 MD5 is no longer secure and some operating systems have started to disable
11 - Keep active bond slave selection across OVS restart.
15 - OpenFlow 1.1, 1.2, and 1.3 are now enabled by default in
17 - Linux kernel datapath now has an exact match cache optimizing the
18 flow matching process.
19 - Datapath flows now have partially wildcarded tranport port field
20 matches. This reduces userspace upcalls, but increases the
21 number of different masks in the datapath. The kernel datapath
22 exact match cache removes the overhead of matching the incoming
23 packets with the larger number of masks, but when paired with an
24 older kernel module, some workloads may perform worse with the
27 v2.2.0 - Internal Release
29 - Internal ports are no longer brought up by default, because it
30 should be an administrator task to bring up devices as they are
32 - ovs-vsctl now reports when ovs-vswitchd fails to create a new port or
34 - The "ovsdbmonitor" graphical tool has been removed, because it was
35 poorly maintained and not widely used.
36 - New "check-ryu" Makefile target for running Ryu tests for OpenFlow
37 controllers against Open vSwitch. See INSTALL for details.
38 - Added IPFIX support for SCTP flows and templates for ICMPv4/v6 flows.
39 - Upon the receipt of a SIGHUP signal, ovs-vswitchd no longer reopens its
40 log file (it will terminate instead). Please use 'ovs-appctl vlog/reopen'
42 - Support for Linux kernels up to 3.14. From Kernel 3.12 onwards OVS uses
43 tunnel API for GRE and VXLAN.
44 - Added experimental DPDK support.
45 - Added support for custom vlog patterns in Python
49 - Address prefix tracking support for flow tables. New columns
50 "prefixes" in OVS-DB table "Flow_Table" controls which packet
51 header fields are used for address prefix tracking. Prefix
52 tracking allows the classifier to skip rules with longer than
53 necessary prefixes, resulting in better wildcarding for datapath
54 flows. Default configuration is to not use any fields for prefix
55 tracking. However, if any flow tables contain both exact matches
56 and masked matches for IP address fields, OVS performance may be
57 increased by using this feature.
58 * As of now, the fields for which prefix lookup can be enabled
59 are: 'tun_id', 'tun_src', 'tun_dst', 'nw_src', 'nw_dst' (or
60 aliases 'ip_src' and 'ip_dst'), 'ipv6_src', and 'ipv6_dst'.
61 (Using this feature for 'tun_id' would only make sense if the
62 tunnel IDs have prefix structure similar to IP addresses.)
63 * There is a maximum number of fields that can be enabled for any
64 one flow table. Currently this limit is 3.
66 $ ovs-vsctl set Bridge br0 flow_tables:0=@N1 -- \
67 --id=@N1 create Flow_Table name=table0
68 $ ovs-vsctl set Bridge br0 flow_tables:1=@N1 -- \
69 --id=@N1 create Flow_Table name=table1
70 $ ovs-vsctl set Flow_Table table0 prefixes=ip_dst,ip_src
71 $ ovs-vsctl set Flow_Table table1 prefixes=[]
72 - TCP flags matching: OVS now supports matching of TCP flags. This
73 has an adverse performance impact when using OVS userspace 1.10
74 or older (no megaflows support) together with the new OVS kernel
75 module. It is recommended that the kernel and userspace modules
76 both are upgraded at the same time.
77 - The default OpenFlow and OVSDB ports will change to
78 IANA-assigned numbers in a future release. Consider updating
79 your installations to specify port numbers instead of using the
82 * The OpenFlow 1.1+ "Write-Actions" instruction is now supported.
83 * OVS limits the OpenFlow port numbers it assigns to port 32767 and
84 below, leaving port numbers above that range free for assignment
86 * ovs-vswitchd now honors changes to the "ofport_request" column
87 in the Interface table by changing the port's OpenFlow port
89 - ovs-vswitchd.conf.db.5 man page will contain graphviz/dot
90 diagram only if graphviz package was installed at the build time.
91 - Support for Linux kernels up to 3.11
93 The "show" command also displays mega flow mask stats.
95 * New command "ofp-parse-pcap" to dump OpenFlow from PCAP files.
96 - ovs-controller has been renamed test-controller. It is no longer
97 packaged or installed by default, because too many users assumed
98 incorrectly that ovs-controller was a necessary or desirable part
99 of an Open vSwitch deployment.
100 - Added vlog option to export to a UDP syslog sink.
102 * The "monitor" command can now monitor all tables in a database,
103 instead of being limited to a single table.
104 - The flow-eviction-threshold has been replaced by the flow-limit which is a
105 hard limit on the number of flows in the datapath. It defaults to 200,000
106 flows. OVS automatically adjusts this number depending on network
108 - Added IPv6 support for active and passive socket communications.
112 ---------------------
113 - The ovs-vswitchd process is no longer single-threaded. Multiple
114 threads are now used to handle flow set up and asynchronous
117 * Experimental support for OpenFlow 1.1 (in addition to 1.2 and
118 1.3, which had experimental support in 1.10).
119 * Experimental protocol support for OpenFlow 1.1+ groups. This
120 does not yet include an implementation in the Open vSwitch
122 * Experimental protocol support for OpenFlow 1.2+ meters. This
123 does not yet include an implementation in the Open vSwitch
125 * New support for matching outer source and destination IP address
126 of tunneled packets, for tunnel ports configured with the newly
127 added "remote_ip=flow" and "local_ip=flow" options.
128 * Support for matching on metadata 'pkt_mark' for interacting with
129 other system components. On Linux this corresponds to the skb
131 * Support matching, rewriting SCTP ports
132 - The Interface table in the database has a new "ifindex" column to
133 report the interface's OS-assigned ifindex.
134 - New "check-oftest" Makefile target for running OFTest against Open
135 vSwitch. See README-OFTest for details.
136 - The flow eviction threshold has been moved to the Open_vSwitch table.
137 - Database names are now mandatory when specifying ovsdb-server options
138 through database paths (e.g. Private key option with the database name
139 should look like "--private-key=db:Open_vSwitch,SSL,private_key").
140 - Added ovs-dev.py, a utility script helpful for Open vSwitch developers.
141 - Support for Linux kernels up to 3.10
143 * New "ofp-parse" for printing OpenFlow messages read from a file.
144 * New commands for OpenFlow 1.1+ groups.
145 - Added configurable flow caching support to IPFIX exporter.
146 - Dropped support for Linux pre-2.6.32.
147 - Log file timestamps and ovsdb commit timestamps are now reported
148 with millisecond resolution. (Previous versions only reported
152 v1.11.0 - 28 Aug 2013
153 ---------------------
154 - Support for megaflows, which allows wildcarding in the kernel (and
155 any dpif implementation that supports wildcards). Depending on
156 the flow table and switch configuration, flow set up rates are
157 close to the Linux bridge.
158 - The "tutorial" directory contains a new tutorial for some advanced
159 Open vSwitch features.
160 - Stable bond mode has been removed.
161 - The autopath action has been removed.
162 - New support for the data encapsulation format of the LISP tunnel
163 protocol (RFC 6830). An external control plane or manual flow
164 setup is required for EID-to-RLOC mapping.
166 * The "dec_mpls_ttl" and "set_mpls_ttl" actions from OpenFlow
167 1.1 and later are now implemented.
168 * New "stack" extension for use in actions, to push and pop from
170 * The "load" and "set_field" actions can now modify the "in_port". (This
171 allows one to enable output to a flow's input port by setting the
172 in_port to some unused value, such as OFPP_NONE.)
174 * New debugging commands "add-flow", "mod-flow", "del-flow".
175 * "dump-flows" now has a -m option to increase output verbosity.
176 - In dpif-based bridges, cache action translations, which can improve
177 flow set up performance by 80% with a complicated flow table.
178 - New syslog format, prefixed with "ovs|", to be easier to filter.
179 - RHEL: Removes the default firewall rule that allowed GRE traffic to
180 pass through. Any users that relied on this automatic firewall hole
181 will have to manually configure it. The ovs-ctl(8) manpage documents
182 the "enable-protocol" command that can be used as an alternative.
183 - New CFM demand mode which uses data traffic to indicate interface
186 v1.10.0 - 01 May 2013
187 ---------------------
188 - Bridge compatibility support has been removed. Any uses that
189 rely on ovs-brcompatd will have to stick with Open vSwitch 1.9.x
190 or adapt to native Open vSwitch support (e.g. use ovs-vsctl instead
192 - The maximum size of the MAC learning table is now configurable.
193 - With the Linux datapath, packets for new flows are now queued
194 separately on a per-port basis, so it should no longer be
195 possible for a large number of new flows arriving on one port to
196 prevent new flows from being processed on other ports.
198 * Previously ovs-vsctl would retry connecting to the database forever,
199 causing it to hang if ovsdb-server was not running. Now, ovs-vsctl
200 only tries once by default (use --retry to try forever). This change
201 means that you may want to remove uses of --timeout to avoid hangs
203 * Many "ovs-vsctl" database commands now accept an --if-exists option.
204 Please refer to the ovs-vsctl manpage for details.
206 - Experimental support for newer versions of OpenFlow. See
207 the "What versions of OpenFlow does Open vSwitch support?"
208 question in the FAQ for more details.
209 - The OpenFlow "dp_desc" may now be configured by setting the
210 value of other-config:dp-desc in the Bridge table.
211 - It is possible to request the OpenFlow port number with the
212 "ofport_request" column in the Interface table.
213 - The NXM flow_removed message now reports the OpenFlow table ID
214 from which the flow was removed.
216 - New support for the VXLAN tunnel protocol (see the IETF draft here:
217 http://tools.ietf.org/html/draft-mahalingam-dutt-dcops-vxlan-03).
218 - Tunneling requires the version of the kernel module paired with
219 Open vSwitch 1.9.0 or later.
220 - Inheritance of the Don't Fragment bit in IP tunnels (df_inherit)
221 is no longer supported.
222 - Path MTU discovery is no longer supported.
223 - CAPWAP tunneling support removed.
224 - Tunnels with multicast destination ports are no longer supported.
226 - The "dump-flows" and "del-flows" no longer require an argument
227 if only one datapath exists.
229 - New "vlog/disable-rate-limit" and "vlog/enable-rate-limit"
230 commands available allow control over logging rate limits.
231 - New "dpif/dump-dps", "dpif/show", and "dpif/dump-flows" command
232 that mimic the equivalent ovs-dpctl commands.
233 - The ofproto library is now responsible for assigning OpenFlow port
234 numbers. An ofproto implementation should assign them when
235 port_construct() is called.
236 - All dpif-based bridges of a particular type share a common
237 datapath called "ovs-<type>", e.g. "ovs-system". The ovs-dpctl
238 commands will now return information on that shared datapath. To
239 get the equivalent bridge-specific information, use the new
240 "ovs-appctl dpif/*" commands.
241 - Backward-incompatible changes:
242 - Earlier Open vSwitch versions treated ANY as a wildcard in flow
243 syntax. OpenFlow 1.1 adds a port named ANY, which introduces a
244 conflict. ANY was rarely used in flow syntax, so we chose to
245 retire that meaning of ANY in favor of the OpenFlow 1.1 meaning.
246 - Patch ports no longer require kernel support, so they now work
247 with FreeBSD and the kernel module built into Linux 3.3 and later.
248 - New "sample" action.
252 ------------------------
254 - Support for ipv6 set action.
255 - SKB mark matching and setting.
256 - support for Linux kernels up to 3.8
257 - FreeBSD is now a supported platform, thanks to code contributions from
258 Gaetano Catalli, Ed Maste, and Giuseppe Lettieri.
259 - ovs-bugtool: New --ovs option to report only OVS related information.
260 - New %t and %T log escapes to identify the subprogram within a
261 cooperating group of processes or threads that emitted a log message.
262 The default log patterns now include this information.
264 - Allow bitwise masking for SHA and THA fields in ARP, SLL and TLL
265 fields in IPv6 neighbor discovery messages, and IPv6 flow label.
266 - Adds support for writing to the metadata field for a flow.
268 - The tunneling code no longer assumes input and output keys are
269 symmetric. If they are not, PMTUD needs to be disabled for
270 tunneling to work. Note this only applies to flow-based keys.
271 - New support for a nonstandard form of GRE that supports a 64-bit key.
272 - Tunnel Path MTU Discovery default value was set to 'disabled'.
273 This feature is deprecated and will be removed soon.
274 - Tunnel header caching removed.
276 - Commands and actions that accept port numbers now also accept keywords
277 that represent those ports (such as LOCAL, NONE, and ALL). This is
278 also the recommended way to specify these ports, for compatibility
279 with OpenFlow 1.1 and later (which use the OpenFlow 1.0 numbers
280 for these ports for different purposes).
282 - Support requesting the port number with the "port_no" option in
283 the "add-if" command.
284 - ovs-pki: The "online PKI" features have been removed, along with
285 the ovs-pki-cgi program that facilitated it, because of some
286 alarmist insecurity claims. We do not believe that these claims
287 are true, but because we do not know of any users for this
288 feature it seems better on balance to remove it. (The ovs-pki-cgi
289 program was not included in distribution packaging.)
290 - ovsdb-server now enforces the immutability of immutable columns. This
291 was not enforced in earlier versions due to an oversight.
292 - The following features are now deprecated. They will be removed no
293 earlier than February 2013. Please email dev@openvswitch.org with
295 - Bridge compatibility.
297 - The autopath action.
298 - Interface type "null".
299 - Numeric values for reserved ports (see "ovs-ofctl" note above).
300 - Tunnel Path MTU Discovery.
301 - CAPWAP tunnel support.
302 - The data in the RARP packets can now be matched in the same way as the
307 ------------------------
308 *** Internal only release ***
309 - New FAQ. Please send updates and additions!
310 - Authors of controllers, please read the new section titled "Action
311 Reproduction" in DESIGN, which describes an Open vSwitch change in
312 behavior in corner cases that may affect some controllers.
314 - A new test utility that can create L3 tunnel between two Open
315 vSwitches and detect connectivity issues.
317 - New --sort and --rsort options for "dump-flows" command.
318 - "mod-port" command can now control all OpenFlow config flags.
320 - Allow general bitwise masking for IPv4 and IPv6 addresses in
321 IPv4, IPv6, and ARP packets. (Previously, only CIDR masks
323 - Allow support for arbitrary Ethernet masks. (Previously, only
324 the multicast bit in the destination address could be individually
326 - New field OXM_OF_METADATA, to align with OpenFlow 1.1.
327 - The OFPST_QUEUE request now reports an error if a specified port or
328 queue does not exist, or for requests for a specific queue on all
329 ports, if the specified queue does not exist on any port. (Previous
330 versions generally reported an empty set of results.)
331 - New "flow monitor" feature to allow controllers to be notified of
332 flow table changes as they happen.
333 - Additional protocols are not mirrored and dropped when forward-bpdu is
334 false. For a full list, see the ovs-vswitchd.conf.db man page.
335 - Open vSwitch now sends RARP packets in situations where it previously
336 sent a custom protocol, making it consistent with behavior of QEMU and
338 - All Open vSwitch programs and log files now show timestamps in UTC,
339 instead the local timezone, by default.
343 ------------------------
344 - kernel modules are renamed. openvswitch_mod.ko is now
345 openvswitch.ko and brcompat_mod.ko is now brcompat.ko.
346 - Increased the number of NXM registers to 8.
347 - Added ability to configure DSCP setting for manager and controller
348 connections. By default, these connections have a DSCP value of
349 Internetwork Control (0xc0).
350 - Added the granular link health statistics, 'cfm_health', to an
353 - Added support to mask nd_target for ICMPv6 neighbor discovery flows.
354 - Added support for OpenFlow 1.3 port description (OFPMP_PORT_DESC)
357 - Added the "dump-ports-desc" command to retrieve port
358 information using the new port description multipart messages.
360 - Added support for spawning ovs-test server from the client.
361 - Now ovs-test is able to automatically create test bridges and ports.
362 - "ovs-dpctl dump-flows" now prints observed TCP flags in TCP flows.
363 - Tripled flow setup performance.
364 - The "coverage/log" command previously available through ovs-appctl
365 has been replaced by "coverage/show". The new command replies with
366 coverage counter values, instead of logging them.
370 ------------------------
371 - Allow OFPP_CONTROLLER as the in_port for packet-out messages.
375 ------------------------
376 *** Internal only release ***
378 - LACP bonds no longer fall back to balance-slb when negotiations fail.
379 Instead they drop traffic.
380 - The default bond_mode changed from SLB to active-backup, to protect
381 unsuspecting users from the significant risks of SLB bonds (which are
382 documented in vswitchd/INTERNALS).
383 - Load balancing can be disabled by setting the bond-rebalance-interval
386 - Added support for bitwise matching on TCP and UDP ports.
387 See ovs-ofctl(8) for more information.
388 - NXM flow dumps now include times elapsed toward idle and hard
390 - Added an OpenFlow extension NXT_SET_ASYNC_CONFIG that allows
391 controllers more precise control over which OpenFlow messages they
392 receive asynchronously.
393 - New "fin_timeout" action.
394 - Added "fin_timeout" support to "learn" action.
395 - New Nicira action NXAST_CONTROLLER that offers additional features
396 over output to OFPP_CONTROLLER.
397 - When QoS settings for an interface do not configure a default queue
398 (queue 0), Open vSwitch now uses a default configuration for that
399 queue, instead of dropping all packets as in previous versions.
401 - Logging to console and file will have UTC timestamp as a default for
402 all the daemons. An example of the default format is
403 2012-01-27T16:35:17Z. ovs-appctl can be used to change the default
405 - The syntax of commands and options to set log levels was simplified,
406 to make it easier to remember.
407 - New support for limiting the number of flows in an OpenFlow flow
408 table, with configurable policy for evicting flows upon
409 overflow. See the Flow_Table table in ovs-vswitch.conf.db(5)
410 for more information.
411 - New "enable-async-messages" column in the Controller table. If set to
412 false, OpenFlow connections to the controller will initially have all
413 asynchronous messages disabled, overriding normal OpenFlow behavior.
414 - ofproto-provider interface:
415 - "struct rule" has a new member "used" that ofproto implementations
416 should maintain by updating with ofproto_rule_update_used().
418 - The new option --timestamp causes the "monitor" command to print
419 a timestamp with every update.
420 - CFM module CCM broadcasts can now be tagged with an 802.1p priority.
424 ------------------------
426 - Added support for querying, modifying, and deleting flows
427 based on flow cookie when using NXM.
428 - Added new NXM_PACKET_IN format.
429 - Added new NXAST_DEC_TTL action.
431 - Added daemonization support to the monitor and snoop commands.
433 - The "find" command supports new set relational operators
434 {=}, {!=}, {<}, {>}, {<=}, and {>=}.
435 - ovsdb-tool now uses the typical database and schema installation
436 directories as defaults.
437 - The default MAC learning timeout has been increased from 60 seconds
438 to 300 seconds. The MAC learning timeout is now configurable.
442 ------------------------
443 - Compatible with Open vSwitch kernel module included in Linux 3.3.
444 - New "VLAN splinters" feature to work around buggy device drivers
445 in old Linux versions. (This feature is deprecated. When
446 broken device drivers are no longer in widespread use, we will
447 delete this feature.) See ovs-vswitchd.conf.db(5) for more
450 - Added ability to match on IPv6 flow label through NXM.
451 - Added ability to match on ECN bits in IPv4 and IPv6 through NXM.
452 - Added ability to match on TTL in IPv4 and IPv6 through NXM.
453 - Added ability to modify ECN bits in IPv4.
454 - Added ability to modify TTL in IPv4.
456 - Don't require the "normal" action to use mirrors. Traffic will
457 now be properly mirrored for any flows, regardless of their
459 - Track packet and byte statistics sent on mirrors.
460 - The sFlow implementation can now usually infer the correct agent
461 device instead of having to be told explicitly.
463 - New "fdb/flush" command to flush bridge's MAC learning table.
465 - A new distributed testing tool that allows one to diagnose performance
466 and connectivity issues. This tool currently is not included in RH or
468 - RHEL packaging now supports integration with Red Hat network scripts.
470 - Post 1.4.*, OVS will be changing the default bond mode from balance-slb
471 to active-backup. SLB bonds carry significant risks with them
472 (documented vswitchd/INTERNALS) which we want to prevent unsuspecting
473 users from running into. Users are advised to update any scripts or
474 configuration which may be negatively impacted by explicitly setting
475 the bond mode which they want to use.
479 ------------------------
481 - Added an OpenFlow extension which allows the "output" action to accept
483 - Added an OpenFlow extension for flexible learning.
484 - Bumped number of NXM registers from four to five.
486 - New "version" command to determine version of running daemon.
487 - If no argument is provided for "cfm/show", displays detailed
488 information about all interfaces with CFM enabled.
489 - If no argument is provided for "lacp/show", displays detailed
490 information about all ports with LACP enabled.
492 - New "set-if" command to modify a datapath port's configuration.
494 - The software switch now supports 255 OpenFlow tables, instead
495 of just one. By default, only table 0 is consulted, but the
496 new NXAST_RESUBMIT_TABLE action can look up in additional
497 tables. Tables 128 and above are reserved for use by the
498 switch itself; please use only tables 0 through 127.
499 - Add support for 802.1D spanning tree (STP).
500 - Fragment handling extensions:
501 - New OFPC_FRAG_NX_MATCH fragment handling mode, in which L4
502 fields are made available for matching in fragments with
504 - New NXM_NX_IP_FRAG match field for matching IP fragments (usable
505 via "ip_frag" in ovs-ofctl).
506 - New ovs-ofctl "get-frags" and "set-frags" commands to get and set
507 fragment handling policy.
508 - CAPWAP tunneling now supports an extension to transport a 64-bit key.
509 By default it remains compatible with the old version and other
510 standards-based implementations.
511 - Flow setups are now processed in a round-robin manner across ports
512 to prevent any single client from monopolizing the CPU and conducting
513 a denial of service attack.
514 - Added support for native VLAN tagging. A new "vlan_mode"
515 parameter can be set for "port". Possible values: "access",
516 "trunk", "native-tagged" and "native-untagged".
517 - test-openflowd has been removed. Please use ovs-vswitchd instead.
520 ------------------------
521 - New "ofproto" abstraction layer to ease porting to hardware
523 - Packaging for Red Hat Enterprise Linux 5.6 and 6.0.
524 - Datapath support for Linux kernels up to 3.0.
526 - New "bundle" and "bundle_load" action extensions.
528 - Implement table unique constraints.
529 - Support cooperative locking between callers.
531 - New "-s" option for "show" command prints packet and byte
532 counters for each port.
534 - New "--readd" option for "replace-flows".
536 - New "show" command to print an overview of configuration.
537 - New "comment" command to add remark that explains intentions.
538 - ovs-brcompatd has been rewritten to fix long-standing bugs.
539 - ovs-openflowd has been renamed test-openflowd and moved into the
540 tests directory. Its presence confused too many users. Please
541 use ovs-vswitchd instead.
542 - New ovs-benchmark utility to test flow setup performance.
543 - A new log level "off" has been added. Configuring a log facility
544 "off" prevents any messages from being logged to it. Previously,
545 "emer" was effectively "off" because no messages were ever logged at
546 level "emer". Now, errors that cause a process to exit are logged
548 - "configure" option --with-l26 has been renamed --with-linux, and
549 --with-l26-source has been renamed --with-linux-source. The old
550 names will be removed after the next release, so please update
552 - The "-2.6" suffix has been dropped from the datapath/linux-2.6 and
553 datapath/linux-2.6/compat-2.6 directories.
555 - Dropped support for "tun_id_from_cookie" OpenFlow extension.
556 Please use the extensible match extensions instead.
557 - Removed the Maintenance_Point and Monitor tables in an effort
558 to simplify 802.1ag configuration.
559 - Performance and scalability improvements
563 ------------------------
564 - Ability to define policies over IPv6
567 - Support for extensible match extensions to OpenFlow
569 - Support for HFSC qdisc.
570 - Queue used by in-band control can now be configured.
572 - Kernel<->userspace interface has been reworked and should be
573 close to a stable ABI now.
574 - "Port group" concept has been dropped.
575 - GRE over IPSEC tunnels
577 - New active backup bonding mode.
578 - New L4 hashing support when LACP is enabled.
579 - Source MAC hash now includes VLAN field also.
581 - Greatly improved handling of large flow tables
583 - "show" command now prints full vport configuration.
584 - "dump-groups" command removed since kernel support for
585 port groups was dropped.
587 - New commands for working with the new Managers table.
588 - "list" command enhanced with new formatting options and --columns
590 - "get" command now accepts new --id option.
591 - New "find" command.
593 - New "queue-stats" command for printing queue stats.
594 - New commands "replace-flows" and "diff-flows".
595 - Commands to add and remove flows can now read from files.
596 - New --flow-format option to enable or disable NXM.
597 - New --more option to increase OpenFlow message verbosity.
598 - Removed "tun-cookie" command, which is no longer useful.
599 - ovs-controller enhancements for testing various features.
600 - New ovs-vlan-test command for testing for Linux kernel driver VLAN
601 bugs. New ovs-vlan-bug-workaround command for enabling and
602 disabling a workaround for these driver bugs.
604 - "Resubmit" actions now update flow statistics.
605 - New "register" extension for use in matching and actions, via NXM.
606 - New "multipath" experimental action extension.
607 - New support for matching multicast Ethernet frames, via NXM.
608 - New extension for OpenFlow vendor error codes.
609 - New extension to set the QoS output queue without actually
610 sending to an output port.
611 - Open vSwitch now reports a single flow table, instead of
612 separate hash and wildcard tables. This better models the
613 current implementation.
614 - New experimental "note" action.
615 - New "ofproto/trace" ovs-appctl command and associated utilities
616 to ease debugging complex flow tables.
618 - Schema documentation now includes an entity-relationship diagram.
619 - The database is now garbage collected. In most tables,
620 unreferenced rows will be deleted automatically.
621 - Many tables now include statistics updated periodically by
622 ovs-vswitchd or ovsdb-server.
623 - Every table now has an "external-ids" column for use by OVS
625 - There is no default controller anymore. Each bridge must have its
626 controller individually specified.
627 - The "fail-mode" is now a property of a Bridge instead of a Controller.
628 - New versioning and checksum features.
629 - New Managers table and manager_options column in Open_vSwitch table
630 for specifying managers. The old "managers" column in the
631 Open_vSwitch table has been removed.
632 - Many "name" columns are now immutable.
634 - Dropped support for XenServer pre-5.6.100.
635 - Dropped support for Linux pre-2.6.18.
636 - Dropped controller discovery support.
637 - Dropped "ovs-ofctl status" and the OpenFlow extension that it used.
638 Statistics reporting in the database is a rough equivalent.
639 - Dropped the "corekeeper" package (now separate, at
640 http://openvswitch.org/cgi-bin/gitweb.cgi?p=corekeeper).
641 - Performance and scalability improvements
644 v1.1.0pre2 - 13 Sep 2010
645 ------------------------
648 v1.1.0pre1 - 31 Aug 2010
649 ------------------------
650 - OpenFlow 1.0 slicing (QoS) functionality
651 - Python bindings for configuration database (no write support)
652 - Performance and scalability improvements
657 - New "patch" interface type
662 - Configuration database with remote management
665 - Support for XenServer 5.5 and 5.6
666 - Performance and scalability improvements
669 v0.99.2 - 18 Feb 2010
670 ---------------------
673 v0.99.1 - 25 Jan 2010
674 ---------------------
675 - Add support for sFlow(R)
676 - Make headers compatible with C++
679 v0.99.0 - 14 Jan 2010
680 ---------------------
681 - User-space forwarding engine
684 v0.90.7 - 29 Nov 2009
685 ---------------------
686 - Add support for NetFlow active timeouts
693 v0.90.5 - 21 Sep 2009
694 ---------------------
695 - Generalize in-band control to more diverse network setups
projects / cascardo / ovs.git / blob